Skip to content

Granite–Greenstone and Granulite Belts

CSIR NET Earth Sciences Part C: TTG gneisses, greenstone stratigraphy, komatiites, dome-and-keel tectonics, granulites, charnockites, UHT and P–T–t paths.

  • 18 min read
  • Updated
On this page · 13 sections
  1. Prerequisites
  2. The Hook: Green Rocks Between Grey Domes
  3. Archean Crust in Two Rock Associations
  4. TTG: The Grey Gneisses
  5. Greenstone Belts
  6. Granulite Belts
  7. Memory Tricks
  8. Don’t Confuse
  9. Common Mistakes
  10. Practice
  11. Quick Revision Table
  12. Key Takeaways
  13. What’s Next

Prerequisites

The Hook: Green Rocks Between Grey Domes

Archean Crust in Two Rock Associations

Archean cratons are made of two contrasting kinds of terrain:

FeatureGranite–greenstone terrainHigh-grade gneiss–granulite terrain
Crustal level exposedupper to middle crustmiddle to lower crust
Metamorphic gradelow: greenschist to amphibolite facieshigh: upper amphibolite to granulite facies
Dominant rocksTTG gneisses and granites with volcano-sedimentary greenstone beltsorthogneisses, charnockites, metasediments (quartzite, marble, khondalite), mafic granulites, anorthosites
Structuredome-and-keel; steep beltsflat-lying to complexly folded gneisses; shear zones
ExamplesBarberton (South Africa), Pilbara and Yilgarn (Australia), Abitibi (Canada), Dharwar (India)Limpopo belt (southern Africa), Napier Complex (Antarctica), Southern Granulite Terrain (India)

The two are often parts of one crustal section. In south India the transition from Dharwar greenstones in the north to granulites in the south is read as a tilted section through the crust (see below).

TTG: The Grey Gneisses

TTG stands for tonalite–trondhjemite–granodiorite, the sodic plutonic suite that forms most of the Archean continental crust (the “grey gneisses”).

PropertyTTG value or character
SiO\(_2\)high, mostly above about 64 wt%
AlkalisNa-rich: Na\(_2\)O/K\(_2\)O well above 1
Al\(_2\)O\(_3\)high (about 15 wt% or more at 70 wt% SiO\(_2\))
Srhigh (plagioclase not in the residue)
Y, Yb (HREE)low (held by garnet in the residue)
Sr/Y and (La/Yb)\(_\text{N}\)high: steep REE pattern
Eu anomalysmall or none
Ferromagnesian contentlow (biotite as the main mafic mineral)

Petrogenesis. The steep REE pattern and low Y need garnet in the residue; the high Sr and absent Eu anomaly mean plagioclase was not left behind. So TTGs are melts of hydrated basalt (amphibolite or eclogite) at pressures where garnet is stable and plagioclase is not. Where that basalt melted is the debate:

  • in the slab of a hot subduction zone (TTGs resemble modern adakites), or
  • at the base of thickened mafic crust (oceanic plateaus, delaminating roots), or
  • in sagducting greenstone keels dragged to depth.

TTGs are often split into low-, medium- and high-pressure groups by their Sr/Y and HREE signatures, implying melting across a range of depths.

Later Archean granitoids differ:

GranitoidCharacterOrigin
Sanukitoids (about 2.9–2.6 Ga)high Mg, Ni, Cr and also high Sr, Ba, LREEmelting of mantle metasomatised by slab melts
K-rich granites (late Archean)potassic, often with Eu anomalyremelting of older TTG crust; marks cratonisation
Hybrid granitesmixedmixing of the above

In the Dharwar Craton the older Peninsular Gneiss is TTG; the late Archean Closepet Granite is a younger, potassic, partly mantle-influenced body, a classic example of stabilising granitoids.

Greenstone Belts

A greenstone belt is an elongate belt of metamorphosed volcanic and sedimentary rocks within granitoid gneiss. “Greenstone” is a field term for low-grade mafic volcanic rock.

A generalised stratigraphy

graph BT
    A["Lower: ultramafic and mafic volcanics
komatiites, pillowed tholeiitic basalts"] --> B["Middle: mafic to felsic volcanics
calc-alkaline basalt-andesite-dacite-rhyolite, tuffs"] B --> C["Upper: sediments
greywacke, shale, chert, BIF,
conglomerate, quartzite"]

The upward trend (ultramafic → mafic → felsic volcanics → clastic sediments) is a classic textbook generalisation. Real belts are often stacks of thrust slices, so the “stratigraphy” may be tectonic.

BeltMain subdivisions (bottom to top)
Barberton (Kaapvaal Craton, South Africa)Onverwacht Group (komatiites, basalts, cherts) → Fig Tree Group (greywacke, shale, chert, BIF) → Moodies Group (sandstone, conglomerate)
Dharwar (Western Dharwar Craton)older Sargur Group (high-grade, ultramafic–mafic with quartzite, carbonate) → Dharwar Supergroup split into the lower Bababudan Group (mafic volcanics, quartzite) and upper Chitradurga Group (greywacke, BIF, volcanics)

Komatiites

PropertyValue
Definition (IUGS)ultramafic volcanic rock with MgO > 18 wt%, low TiO\(_2\) (below 1 wt%) and low alkalis (Na\(_2\)O + K\(_2\)O below 2 wt%)
NameKomati River, Barberton belt, South Africa (described by the Viljoen brothers, 1969)
Texturespinifex: long, platy or skeletal olivine (or pyroxene) crystals grown by rapid cooling of a superheated, low-viscosity lava
Eruption temperaturevery high; liquidus temperature rises steeply with MgO (often approximated as about 20 °C per wt% MgO), giving roughly 1,600 °C for 30 wt% MgO
Age distributionmostly Archean; Paleoproterozoic examples; Gorgona Island (Cretaceous) is the young exception
Orekomatiite-hosted Ni–Cu sulphides (Kambalda, Western Australia)

Komatiites imply very high degrees of mantle melting (perhaps 30–50%), in hot plumes or in a mantle hotter than today’s.

Structure: dome-and-keel

Granitoid domes surrounded by synformal greenstone keels with steep foliations and steep lineations. Two families of explanation:

Vertical tectonicsHorizontal (plate-like) tectonics
dense greenstone sinks into hot, weak, partly molten granitoid crust (sagduction, partial convective overturn)greenstones are accreted slices of arcs, plateaus and back-arc basins, later intruded and domed
explains radial dome patterns, steep lineationsexplains thrust-repeated sequences, linear belts, arc-like volcanics
example interpretation: East Pilbaraexample interpretation: Abitibi, Superior Province

Many belts probably record both: early vertical processes, later horizontal shortening.

Metamorphism and mineralisation

Greenstones are mostly at greenschist to amphibolite facies, with low-pressure, high-temperature gradients near the domes. They are the world’s main hosts of:

Deposit typeSettingExamples
Orogenic (lode) goldquartz veins in shear zones, late in the tectonic historyKolar and Hutti (Dharwar), Abitibi, Kalgoorlie
Komatiite-hosted Ni–Cubasal lava channelsKambalda
Volcanogenic massive sulphide (Cu–Zn)seafloor felsic volcanicsAbitibi (Noranda)
Algoma-type BIFwith volcanics and greywackesmany greenstone belts; contrasted with the larger shelf-type Superior BIFs

Indian greenstone belts at a glance

Western Dharwar CratonEastern Dharwar Craton
older (Mesoarchean) greenstones; large, with thick sedimentary sequencesyounger (Neoarchean), narrow, volcanic-dominated belts
Sargur-type belts (Nuggihalli, Holenarsipur); Dharwar Supergroup belts (Bababudan, Chitradurga, Shimoga)Kolar, Hutti, Ramagiri, Sandur
BIF-hosted iron and manganese (Bababudan, Chitradurga belts)gold (Kolar, Hutti, Ramagiri); iron and manganese at Sandur

The boundary between the two is commonly placed along the Chitradurga Shear Zone (details on the cratons page).

Granulite Belts

What makes a granulite

Granulite facies is the highest-temperature metamorphic facies of the crust: roughly above 700–750 °C, at pressures mostly 5–12 kbar (about 18–45 km depth). The defining reaction in mafic and quartzofeldspathic rocks is the breakdown of hydrous minerals (biotite, hornblende) to orthopyroxene.

Rock typeGranulite-facies assemblage
Mafic (basic granulite)orthopyroxene + clinopyroxene + plagioclase ± garnet ± hornblende
Felsic igneous (charnockite, enderbite)quartz + K-feldspar (often perthite) + plagioclase + orthopyroxene ± garnet; enderbite is the tonalitic (plagioclase-rich) member
Pelitic (khondalite)quartz + garnet + sillimanite + K-feldspar ± graphite ± cordierite
Calcareouscalcite + forsterite + diopside ± scapolite ± wollastonite

Typical features: granoblastic polygonal texture, dark “greasy” quartz and feldspar, low water content, and depletion in LILE (Rb, U, Th, sometimes K), giving high K/Rb ratios.

Charnockite was named by T. H. Holland after the tombstone of Job Charnock, the founder of Calcutta (Kolkata), which is made of the rock; the type area is around Chennai (Pallavaram–St Thomas Mount). Khondalite is named after the Khond (Kondh) people of Odisha, in whose hills the Eastern Ghats rock is exposed.

How water is removed

Hydrous minerals break down only if water activity, \( a_{\text{H}_2\text{O}} \), is low. Two processes, not mutually exclusive:

  1. Fluid-present (CO\(_2\) flushing): CO\(_2\)-rich fluids from the mantle or from underplated magmas dilute H\(_2\)O. Evidence: dense CO\(_2\) fluid inclusions in granulite quartz and garnet.
  2. Fluid-absent (melt loss): dehydration melting of biotite and hornblende makes granitic melt; the melt carries water (and LILE) away, leaving a dry residue. Evidence: migmatites, restitic compositions, LILE depletion.

Incipient (arrested) charnockites show the transition on outcrop scale: patches and veins of coarse orthopyroxene-bearing charnockite within amphibolite-facies gneiss, often along fractures or foliation. Classic Indian localities are Kabbaldurga (Karnataka) and Ponmudi (Kerala). They are taken as evidence for local fluid (CO\(_2\)) control on charnockite formation.

Ultrahigh-temperature (UHT) metamorphism

UHT metamorphism reaches above 900 °C at crustal pressures (commonly 7–13 kbar). Diagnostic indicators in Mg–Al-rich rocks:

  • sapphirine + quartz
  • orthopyroxene + sillimanite + quartz
  • osumilite
  • orthopyroxene with high Al\(_2\)O\(_3\) (about 8–10 wt% or more)
  • mesoperthite or ternary feldspar (reintegrated)

Examples: Napier Complex (Antarctica), several localities in the Eastern Ghats Belt and the Madurai Block of the Southern Granulite Terrain.

P–T–t paths

A P–T–t path records how pressure and temperature changed with time in a rock. Granulites preserve two main shapes, read from reaction textures (coronas and symplectites) and zoning.

graph LR
    subgraph CW["Clockwise path (collision)"]
    A1["Burial and thickening
P rises"] --> A2["Heating at depth
peak T after peak P"] --> A3["Isothermal decompression
ITD: rapid exhumation"] end subgraph ACW["Anticlockwise path (magmatic)"] B1["Heating by magma
at low to moderate P"] --> B2["Loading by magma or
thrusts; peak T"] --> B3["Isobaric cooling
IBC: rock stays deep"] end
PathTexturesTectonic setting
Clockwise with ITDgarnet breaks down to orthopyroxene + plagioclase (or cordierite) symplectites; decompression coronascontinental collision: thickening, thermal relaxation, then fast exhumation by erosion or extension
Anticlockwise with IBCgarnet + quartz coronas growing between orthopyroxene and plagioclase; garnet rims on pyroxenemagmatic accretion or underplating; crust heated and then cooled while remaining at depth

Peak conditions are estimated with thermobarometers (garnet–biotite and garnet–orthopyroxene exchange thermometers; GASP and garnet–orthopyroxene–plagioclase barometers) and with phase-equilibrium modelling (pseudosections).

How do granulites reach the surface?

They form at 20–45 km depth. Exposing them needs either thrusting of a deep slice over shallower rocks or prolonged erosion and extension. Tilted crustal sections, where shallower greenstones grade into deeper granulites along one traverse, are the best natural laboratories.

South India as a tilted crustal section. Traversing south from the Dharwar greenstones, metamorphic grade rises from greenschist through amphibolite to granulite, and estimated pressures increase from about 5 to 7–9 kbar. The northern limit of charnockite (“orthopyroxene isograd”, the old Fermor line) runs roughly east–west across southern Karnataka and Tamil Nadu. The section exposes roughly 20 km of crust.

Granulite belts of India

BeltLocationKey rocksMain metamorphism (approx.)
Southern Granulite Terrain (SGT)south of the Dharwar Cratoncharnockites, khondalites, mafic granulites, UHT rocksnorthern blocks Neoarchean (about 2.5 Ga); Madurai and Trivandrum blocks Pan-African (about 0.6–0.5 Ga)
Eastern Ghats Beltalong the east coast, Odisha–Andhra Pradeshkhondalite, charnockite, leptynite, massif anorthosite (e.g. Chilka Lake), UHT granulitesmainly late Mesoproterozoic to early Neoproterozoic (about 1.0 Ga, Rodinia assembly); older and Pan-African domains also present
Granulites in the Central Indian Tectonic Zone and the Chhotanagpur Gneissic Complexcentral and eastern Indiamafic and pelitic granulites, charnockitesProterozoic

The SGT is divided by large shear zones (north to south): the Moyar–Bhavani and Palghat–Cauvery shear zones, the Madurai Block, the Achankovil shear zone and the Trivandrum Block (Kerala Khondalite Belt). The Palghat–Cauvery zone is interpreted by many workers as a suture of Gondwana assembly. Details are on the next page.

Memory Tricks

Don’t Confuse

ThisvsThat
Charnockite: orthopyroxene granite (K-feldspar rich)Enderbite: orthopyroxene tonalite (plagioclase rich)
Khondalite: garnet–sillimanite metapeliteLeptynite: garnet-bearing quartzofeldspathic (granitic) gneiss
TTG: sodic, Archean, garnet residueLate Archean K-granites: potassic, crustal remelting
ITD (isothermal decompression): fast exhumationIBC (isobaric cooling): stays deep after heating
Algoma-type BIF: greenstone, volcanicSuperior-type BIF: shelf, larger, mostly Neoarchean to Paleoproterozoic
Greenschist facies greenstone (chlorite, actinolite, epidote)Greenstone belt (the whole volcano-sedimentary package, of any grade)

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. Expand TTG.
  2. Which mineral, appearing in quartzofeldspathic rocks, marks granulite facies?
  3. Name two incipient charnockite localities in south India.
Answers
  1. Tonalite–trondhjemite–granodiorite.
  2. Orthopyroxene (hypersthene).
  3. Kabbaldurga (Karnataka) and Ponmudi (Kerala).

Level 2: Part B Style

Practice Q1. A granulite records peak pressure of 9 kbar. Taking average crustal density 2,800 kg m\(^{-3}\) and \( g = 9.8 \) m s\(^{-2}\), its depth of metamorphism was about:

(a) 18 km (b) 25 km (c) 33 km (d) 45 km

Answer: (c)

\( h = P/(\rho g) = 9\times10^{8}/(2800 \times 9.8) = 3.28\times10^{4} \) m \( \approx 33 \) km. (1 kbar = \( 10^{8} \) Pa.) A useful rule: about 3.5–3.7 km per kbar in the crust.

Practice Q2. Which feature of a TTG suite indicates residual garnet during its formation?

(a) Large negative Eu anomaly (b) High K\(_2\)O/Na\(_2\)O (c) Strongly fractionated REE with low Yb and Y (d) High Rb/Sr

Answer: (c)

Garnet strongly retains heavy REE and Y, so melts in equilibrium with residual garnet have low Yb and Y and steep REE patterns. A large Eu anomaly would indicate plagioclase fractionation or residue; TTGs are Na-rich, not K-rich.

Practice Q3. In a generalised Archean greenstone belt succession, which order is typical from base to top?

(a) Clastic sediments → felsic volcanics → komatiites (b) Komatiites and tholeiitic basalts → calc-alkaline volcanics → clastic sediments and BIF (c) Calc-alkaline volcanics → komatiites → carbonates (d) Granite → greywacke → komatiite

Answer: (b)

The textbook generalisation is ultramafic–mafic at the base, mafic to felsic (calc-alkaline) in the middle, and sediments at the top, as in the Barberton Onverwacht–Fig Tree–Moodies succession.

Practice Q4. A pelitic granulite shows garnet porphyroblasts partly replaced by fine intergrowths of orthopyroxene + cordierite. This texture most directly indicates:

(a) isobaric cooling at depth (b) decompression after peak metamorphism (c) prograde burial (d) retrograde hydration at low temperature

Answer: (b)

Garnet is a high-pressure phase; its breakdown to lower-density orthopyroxene + cordierite (or orthopyroxene + plagioclase) symplectites records a drop in pressure, typical of a clockwise path with isothermal decompression.

Level 3: Part C Style

Practice Q5. A spinifex-textured komatiite contains 30.0 wt% MgO and 11.0 wt% FeO (all iron as FeO). Molar masses: MgO 40.30, FeO 71.84 g mol\(^{-1}\). Take the olivine–liquid exchange coefficient \( K_D = (\text{Fe}/\text{Mg})_{\text{ol}}/(\text{Fe}/\text{Mg})_{\text{liq}} = 0.30 \) and the liquidus approximation \( T \approx 1000 + 20\times\text{MgO (wt\%)} \) °C. Which is correct?

(a) Mg# of the liquid about 0.63; first olivine Fo\(_{85}\); liquidus about 1,300 °C (b) Mg# about 0.83; first olivine about Fo\(_{94}\); liquidus about 1,600 °C (c) Mg# about 0.83; first olivine about Fo\(_{83}\); liquidus about 1,600 °C (d) Mg# about 0.73; first olivine about Fo\(_{90}\); liquidus about 1,360 °C

Answer: (b)

Step 1, moles per 100 g: MgO \( 30.0/40.30 = 0.744 \); FeO \( 11.0/71.84 = 0.153 \).

Step 2, Mg#: \( 0.744/(0.744 + 0.153) = 0.829 \approx 0.83 \).

Step 3, olivine: \( (\text{Fe}/\text{Mg})_{\text{liq}} = 0.153/0.744 = 0.206 \); \( (\text{Fe}/\text{Mg})_{\text{ol}} = 0.30 \times 0.206 = 0.0617 \); Fo \( = 1/(1 + 0.0617) = 0.942 \), so Fo\(_{94}\).

Step 4, liquidus: \( 1000 + 20\times30 = 1600 \) °C.

Option (c) forgets that olivine is more magnesian than its liquid (\( K_D < 1 \)); (d) uses the 18 wt% threshold for the temperature. Such high Fo and temperature are why komatiites are taken as evidence for a hot Archean mantle.

Practice Q6. Four granitoid samples from an Archean craton:

SampleSiO\(_2\) (wt%)Na\(_2\)O/K\(_2\)OSr (ppm)Y (ppm)Eu/Eu*
P692.865061.0
Q720.6150350.4
R682.5420220.9
S740.790400.3

Which statements are correct?

  1. P is a TTG formed with garnet but no plagioclase in its residue.
  2. Q and S are potassic granites whose sources or fractionation involved plagioclase.
  3. R is TTG-like but formed at lower pressure than P.
  4. S formed at greater depth than P.

(a) 1 and 2 only (b) 1, 2 and 3 only (c) 2 and 4 only (d) 1 and 4 only

Answer: (b) 1, 2 and 3 only

Compute Sr/Y: P 108, Q 4.3, R 19, S 2.3.

  • 1 true: sodic, Sr/Y about 108, no Eu anomaly: garnet in the residue, plagioclase absent: a high-pressure TTG.
  • 2 true: potassic (Na\(_2\)O/K\(_2\)O below 1), low Sr, high Y, strong negative Eu anomalies: plagioclase retained or fractionated, typical of late Archean crustal-melt granites.
  • 3 true: still sodic with a small Eu anomaly, but higher Y and lower Sr/Y: less garnet, more plagioclase stability; a lower-pressure TTG.
  • 4 false: S has the lowest Sr/Y and the deepest Eu anomaly, indicating shallow, plagioclase-stable conditions.

Practice Q7. A traverse across a granulite terrain gives the following peak and post-peak estimates for successive textures in one rock:

StageTextureT (°C)P (kbar)
1inclusions in garnet core: biotite + sillimanite + quartz7507
2peak: garnet + orthopyroxene + sillimanite + quartz95010
3garnet coronas around orthopyroxene, rims of garnet + quartz80010
4late biotite on garnet rims6509

Which interpretation fits best?

(a) Clockwise path with isothermal decompression; continental collision (b) Anticlockwise path with isobaric cooling following UHT peak; heating by magmatic underplating (c) Clockwise path at greenschist facies (d) The data show only prograde burial

Answer: (b)

The rock heated and loaded together (stage 1 to 2), reached 950 °C at 10 kbar (UHT: above 900 °C, with orthopyroxene + sillimanite + quartz, a UHT indicator), then cooled at nearly constant pressure (stages 2 to 4, 10 to 9 kbar while T fell 300 °C) with garnet growing as coronas. Near-isobaric cooling after heating is the anticlockwise IBC pattern, commonly attributed to heating by underplated or intruded magma, with the crust staying at depth. Decompression textures, needed for (a), are absent.

Quick Revision Table

TopicKey facts
Two Archean terrainsgranite–greenstone (low grade, upper crust) vs high-grade gneiss–granulite (lower crust)
TTGNa-rich, SiO\(_2\) above about 64 wt%, high Sr, low Y and HREE, high Sr/Y; melts of hydrated basalt with garnet residue
Later granitoidssanukitoids (high Mg + high Sr, Ba); K-granites (cratonisation); Closepet Granite in Dharwar
Greenstone columnultramafic–mafic → calc-alkaline → sediments and BIF; Barberton: Onverwacht, Fig Tree, Moodies
KomatiiteMgO above 18 wt%; spinifex; Komati River; about 1,600 °C at 30 wt% MgO; Kambalda Ni
Dome-and-keelsagduction (vertical) vs accretion (horizontal)
Greenstone oresorogenic Au (Kolar, Hutti), komatiite Ni, VMS, Algoma BIF
Dharwar beltsWDC: Sargur, Bababudan, Chitradurga, Shimoga; EDC: Kolar, Hutti, Ramagiri, Sandur
Granulite faciesabove about 700–750 °C, 5–12 kbar; orthopyroxene in quartzofeldspathic rocks
Rock namescharnockite (opx granite), enderbite (opx tonalite), khondalite (grt–sil metapelite)
Water removalCO\(_2\) fluids (inclusions) or melt loss; incipient charnockite at Kabbaldurga, Ponmudi
UHTabove 900 °C; sapphirine + quartz, opx + sil + qtz, osumilite, high-Al opx
P–T–tclockwise + ITD = collision; anticlockwise + IBC = magmatic heating
Indian granulite beltsSGT (Moyar–Bhavani, Palghat–Cauvery, Achankovil shear zones); Eastern Ghats (about 1.0 Ga)

Key Takeaways

What’s Next