Tectonic Geomorphology and Neotectonics
CSIR NET Earth Sciences Part C: active faults, tectonic landforms, geomorphic indices, uplift rates from terraces, paleoseismology and Indian neotectonics.
- 22 min
On this page · 16 sections
- Prerequisites
- The Hook: A Dam Built by an Earthquake
- Definitions
- Landforms of Active Faults
- Geomorphic Indices
- Rates from Dated Markers
- Paleoseismology
- Glacio-isostasy and Other Non-tectonic Movements
- Neotectonics of India
- Memory Tricks
- Don’t Confuse
- Common Mistakes
- Practice
- Quick Revision Table
- Key Takeaways
- What’s Next
Prerequisites
- Fault types, stress and earthquake magnitude, from Earthquakes: Causes, Measurement and Seismicity.
- The Himalayan thrust system (MFT, MBT, MCT, MHT), from Himalayan Orogeny and Supercontinents.
- Geomorphic concepts, hypsometry and drainage patterns, from Concepts, Historical and Process Geomorphology in the Physical Geography section.
- OSL, radiocarbon and cosmogenic exposure dating, from Quaternary Dating Methods.
The Hook: A Dam Built by an Earthquake
Definitions
| Term | Meaning |
|---|---|
| Neotectonics | tectonic movements and deformation in the current tectonic regime of a region; the time window therefore differs by region, but for most purposes means late Cenozoic, especially Quaternary, movements |
| Active tectonics | movements on time scales that matter to society: the last few tens of thousands of years, the Holocene and the present |
| Tectonic geomorphology | the study of landforms produced by tectonic processes, and of how tectonics and surface processes interact |
| Active fault | a fault that has moved in the recent geological past (commonly the late Quaternary or Holocene) and is likely to move again |
| Capable fault | an engineering and regulatory term: a fault judged capable of surface or near-surface displacement in the lifetime of a structure such as a dam or nuclear plant |
| Paleoseismology | the study of prehistoric earthquakes from their geological record |
Neotectonic movements are recorded by geomorphic markers: surfaces or lines that were originally horizontal or straight and of known age, such as river and marine terraces, alluvial fans, shorelines and stream channels. Deformation of a dated marker gives a rate.
Landforms of Active Faults
Faults of all types
| Landform | Description | What it tells you |
|---|---|---|
| Fault scarp | step in the ground surface made directly by fault slip | recent slip; degradation (rounding) with time gives relative age |
| Triangular facets | truncated spur ends along a mountain front | repeated slip on a range-front fault |
| Wine-glass valleys | narrow gorge at the front opening into a wide valley upstream | rapid uplift of the range relative to downcutting |
| Linear valleys and ridges | straight valleys eroded along crushed fault rock | fault trace (active or inactive) |
| Springs and vegetation lines | groundwater rising along the fault | permeability contrast across the fault |
| Knickpoints | steps in a river’s long profile | migrating response to base-level fall, uplift, or rock contrast |
Strike-slip faults
| Landform | Description |
|---|---|
| Offset (deflected) streams | channels bent in the same sense where they cross the fault; the amount of offset, if the channel age is known, gives the slip rate |
| Beheaded streams | downstream segment cut off from its source by fault displacement |
| Shutter ridges | ridges moved across the mouth of a valley, damming or deflecting it |
| Sag ponds | depressions at releasing bends or step-overs (local extension), often holding water |
| Pressure ridges | bulges at restraining bends (local compression) |
Folds and thrusts
- Growing anticlines over blind thrusts warp terraces and fans; rivers cross them in water gaps or are diverted around their noses.
- A wind gap is an abandoned water gap: a notch in a ridge where a river once flowed before uplift outpaced its incision and it was diverted.
- Fault-propagation and fault-bend folds at thrust fronts produce asymmetric ridges; the Siwalik hills along the Himalayan Frontal Thrust are an example.
- Piggyback basins form on top of moving thrust sheets. The Dun valleys of the Himalaya, such as the Dehradun valley between the Main Boundary Thrust and the Siwalik hills, are filled with fan gravels that are themselves tilted and faulted.
Drainage anomalies
Rivers respond quickly to tilting and uplift, so drainage is one of the most sensitive tools:
- abrupt changes in sinuosity or channel pattern (braided to meandering) where a river crosses an uplifting axis;
- compressed meanders and local incision across an uplift; aggradation and braiding upstream of it;
- lateral migration of a river toward the down-tilted side of its basin;
- anomalous bends, barbed tributaries and river capture;
- convergent or radial patterns around domes; deflection along fault zones.
graph TD
U[Active uplift or tilting] --> A[Rivers: incision, knickpoints, deflection, capture]
U --> B[Mountain front: straight, triangular facets, wine-glass valleys]
U --> C[Terraces: raised, warped, tilted]
U --> D[Basins: asymmetric, elongated]
A --> E[Indices: SL, ksn, sinuosity]
B --> F[Indices: Smf, Vf]
D --> G[Indices: AF, T, Re, HI]
C --> H[Uplift rate from dated terraces]Geomorphic Indices
The indices below quantify how active a landscape is. Each is cheap to measure from maps or digital elevation models, and each has non-tectonic confounders (rock type, climate), so they are used together.
Mountain-front sinuosity
$$\boxed{S_{mf} = \frac{L_{mf}}{L_s}}$$\( L_{mf} \) = length of the mountain front along the foot of the range (following every embayment); \( L_s \) = straight-line length of the front. An active front is kept straight by uplift; an inactive front is embayed by erosion. Values close to 1 (roughly below about 1.4) indicate an active front; values well above 2 indicate inactivity.
Valley-floor width to height ratio
$$\boxed{V_f = \frac{2V_{fw}}{(E_{ld} - E_{sc}) + (E_{rd} - E_{sc})}}$$\( V_{fw} \) = width of the valley floor; \( E_{ld} \), \( E_{rd} \) = elevations of the left and right divides; \( E_{sc} \) = elevation of the valley floor. Low \( V_f \) (below about 1) means narrow, V-shaped valleys of rapid incision and uplift; high \( V_f \) means broad, U- or flat-floored valleys where lateral erosion has kept pace. Measure it at a fixed distance upstream of the mountain front.
Stream length–gradient index
$$\boxed{SL = \frac{\Delta H}{\Delta L}\,L}$$\( \Delta H/\Delta L \) = channel gradient of a reach; \( L \) = channel length from the divide to the midpoint of the reach. In an equilibrium river, gradient falls as discharge (and \( L \)) increases, so \( SL \) is roughly constant along the river. Anomalously high SL marks a steep reach: resistant rock, or a fault or fold crossing the channel.
The modern equivalent is the channel steepness index. Slope and drainage area follow \( S = k_s A^{-\theta} \); fixing the concavity \( \theta \) at a reference value (commonly 0.45) gives the normalised steepness \( k_{sn} \), which rises with rock uplift rate in steady-state landscapes. χ (chi) analysis integrates drainage area along the channel to compare tributaries and detect migrating divides.
Basin shape and symmetry
| Index | Formula | Reading |
|---|---|---|
| Asymmetry factor | \( AF = 100\,A_r/A_t \) | \( A_r \) = basin area to the right of the trunk stream looking downstream; \( A_t \) = total area. AF = 50 for a symmetric basin. Far from 50 means tilting: the trunk migrates toward the down-tilted side, so the down-tilted side has the smaller area |
| Transverse topographic symmetry | \( T = D_a/D_d \) | \( D_a \) = distance from basin midline to the active channel; \( D_d \) = distance from midline to the divide on that side. 0 = symmetric; toward 1 = strongly asymmetric |
| Elongation ratio | \( R_e = \dfrac{2}{L_b}\sqrt{A/\pi} \) | diameter of a circle of the same area divided by basin length; values near 1 = circular (low activity); below about 0.5 = elongated (active uplift) |
| Basin shape | \( B_s = B_l/B_w \) | length over width; high values = elongated, young basins on active fronts |
| Hypsometric integral | \( HI = (\bar{z} - z_{\min})/(z_{\max} - z_{\min}) \) | high HI (above about 0.5) = little-eroded uplands, young uplift or resistant rock; low HI = deeply eroded |
Indices are often combined into a single class, for example an index of relative active tectonics, by averaging the class of each index. The point for the exam is the direction of each index, not the scheme.
Rates from Dated Markers
River terraces
| Terrace type | Origin | Tectonic use |
|---|---|---|
| Strath (bedrock) terrace | a river planes a bedrock surface, leaves a thin gravel cover, then incises | strath height above the present channel divided by the strath age gives a bedrock incision rate, which approximates the rock uplift rate if the river is in steady state |
| Fill (aggradation) terrace | a river fills its valley with sediment, then cuts into the fill | records climate-driven changes in sediment supply and discharge; a poor uplift gauge on its own |
| Paired versus unpaired | paired terraces at the same height on both sides; unpaired at different heights | unpaired terraces form during continuous lateral migration while incising |
Terraces are dated by OSL of the cover sediment, radiocarbon of included charcoal, or cosmogenic exposure of the terrace surface.
Marine terraces
A marine terrace (wave-cut platform with a shoreline angle) forms at a sea-level highstand. Its present elevation combines eustatic sea level at the time and later vertical movement:
$$\boxed{U = \frac{E - S}{t}}$$\( E \) = present elevation of the shoreline angle; \( S \) = sea level at the time of formation relative to today; \( t \) = age. The Last Interglacial (MIS 5e, about 125 ka) highstand, a few metres above present sea level, is the most widely used reference terrace.
Fault slip rate and recurrence
$$\boxed{\text{Slip rate} = \frac{\text{offset of a dated marker}}{\text{age of the marker}}} \qquad \boxed{\text{Recurrence interval} \approx \frac{\text{slip per event}}{\text{slip rate}}}$$Offset markers: stream channels and terrace risers across strike-slip faults; fan surfaces and terraces across thrusts and normal faults.
Paleoseismology
Historical records cover only a few centuries in most places, too short for faults whose great earthquakes recur every few hundred to thousands of years. Paleoseismology extends the record.
Trenching. A trench is dug across the fault scarp. Its walls are logged in detail. Evidence of individual earthquakes:
- event horizons: ground surfaces that were faulted and then buried; younger layers are not displaced by that event;
- colluvial wedges: wedges of debris shed from a fresh scarp just after an earthquake, each typically recording one event;
- upward fault terminations at different levels;
- fissure fills, folded or tilted beds at thrust tips.
Each event is bracketed by dating the youngest faulted and the oldest unfaulted layer (radiocarbon on charcoal, OSL on sediment).
Off-fault evidence. Liquefaction features (sand blows, sand dykes), seismites (soft-sediment deformation in lake beds), landslide-dammed lakes, uplifted or subsided coastlines and drowned forests. Liquefaction was widespread in the Gangetic plain during the 1934 Bihar–Nepal earthquake.
Magnitude from fault data. Empirical regressions relate magnitude to surface rupture length or displacement. A widely used one for all fault types (Wells and Coppersmith, 1994) is
$$\boxed{M = 5.08 + 1.16\log_{10}(\text{SRL, km})}$$Moment magnitude can also be computed from \( M_0 = \mu A D \) (rigidity × rupture area × average slip): see Earthquakes: Causes, Measurement and Seismicity.
Glacio-isostasy and Other Non-tectonic Movements
Not every raised shoreline is tectonic. Glacio-isostatic rebound lifts regions unloaded by melting ice sheets (Fennoscandia and Hudson Bay are still rising), and the peripheral bulge around them subsides. Sediment loading in deltas and compaction cause subsidence; hydro-isostasy (water load) tilts continental margins. Neotectonic interpretation must first remove these effects. In the Himalaya, erosional unloading also drives isostatic rock uplift, so the tallest peaks can rise even as the mean surface is lowered.
Neotectonics of India
The Indian plate converges with Eurasia at a few centimetres per year. Part of that convergence is absorbed across the Himalaya, which makes the Himalayan arc India’s most active neotectonic zone; the rest is taken up farther north in Tibet and Asia. Peninsular India is a stable continental region, but old structures within it are reactivated by the stress transmitted from the plate boundaries.
The Himalaya
| Structure | Neotectonic evidence |
|---|---|
| Himalayan Frontal Thrust (HFT, MFT) | the youngest and most active thrust at the front; uplifted and warped Holocene terraces; Holocene surface ruptures found in trenches; growing Siwalik anticlines |
| Main Himalayan Thrust (MHT) | the basal décollement; great earthquakes rupture its locked shallow part (2015 Gorkha, about \( M_w \) 7.8, did not reach the surface) |
| Main Boundary Thrust (MBT) | locally active; faulted fan surfaces in the Dun valleys |
| Dun valleys | piggyback basins; tilted and faulted fan gravels |
| Rivers crossing the front | knickpoints, strath terraces and deep gorges; terrace dating gives Holocene incision and uplift rates across the HFT |
Great Himalayan earthquakes include 1897 Shillong (about \( M \) 8), 1905 Kangra (about 7.8), 1934 Bihar–Nepal (about 8), 1950 Assam (about 8.6) and 2015 Gorkha (about 7.8). The stretch between the 1905 and 1934 ruptures is discussed as the central seismic gap. Paleoseismic trenches across the HFT show that some great earthquakes did rupture the surface in historical and prehistoric times.
The Shillong Plateau and the North-East
The Shillong Plateau is a block of Precambrian basement that has been uplifted, along bounding reverse faults, in the late Cenozoic: it is described as a pop-up structure in front of the eastern Himalaya. The 1897 Shillong earthquake produced surface faulting (Oldham described the Chedrang fault) and is associated with uplift of the plateau’s northern edge on a reverse fault at depth. The North-East also includes the Indo-Burman ranges, an active fold-thrust belt.
Kachchh (Kutch)
Kachchh is a Mesozoic palaeo-rift with east–west faults that are reactivated as reverse faults under today’s north–south compression.
- 1819 Rann of Kachchh earthquake: uplift of the Allah Bund, a ridge that dammed an old channel of the Indus delta, and subsidence of the area around Sindri to its south, which was flooded.
- 2001 Bhuj earthquake (about \( M_w \) 7.7): reverse faulting at depth in the same rift system; widespread liquefaction in the Rann.
- Raised marine terraces, uplifted Holocene sediments and deflected drainage along the Kachchh Mainland Fault and other faults.
Peninsular India
| Zone | Evidence |
|---|---|
| Narmada–Son lineament | an old rift zone; Quaternary faulting and terrace deformation reported along the Narmada valley; the 1997 Jabalpur earthquake lies in this zone |
| Koyna–Warna (Maharashtra) | continuing reservoir-triggered seismicity since the 1960s (Koyna 1967, about \( M \) 6.3) |
| Latur (Killari) | 1993 earthquake (about \( M_w \) 6.2) in the stable Deccan region with no known prior activity |
| Western Ghats and west coast | debated Quaternary uplift; raised beaches and river profiles are used, but sea-level and isostatic effects must be separated |
Andaman–Nicobar
The Andaman–Sumatra subduction zone produced the 26 December 2004 earthquake and tsunami. Coseismic movements included uplift of parts of the western coast of North Andaman and subsidence around Port Blair and the Nicobar Islands, with drowned mangroves and coral heads lifted out of the water. Uplifted coral microatolls record past movements. Barren Island in the Andaman Sea is India’s only active volcano.
Memory Tricks
- “Straight and narrow is active”: low \( S_{mf} \) (straight front) and low \( V_f \) (narrow V valleys).
- “Rivers roll downhill sideways”: a tilted basin’s trunk stream migrates toward the down-tilted side, which ends up with the smaller area.
- “Sag at Separation, Ridge at Restraint”: sag ponds at releasing bends, pressure ridges at restraining bends.
- “A wind gap is a water gap that lost its river.”
- Strath for tectonics, fill for climate.
- Trench rule: “faulted below, sealed above”. An event lies between the youngest faulted and the oldest unfaulted layer.
Don’t Confuse
| This | Is not this |
|---|---|
| Neotectonics (current tectonic regime, Quaternary-scale) | active tectonics (societal time scales, Holocene to present) |
| Strath terrace (bedrock, incision gauge) | fill terrace (aggradation, climate signal) |
| Water gap (river still flows through the ridge) | wind gap (dry, abandoned notch) |
| Sag pond (releasing bend, extension) | pressure ridge (restraining bend, compression) |
| Fault scarp (direct slip) | fault-line scarp (erosion along an old fault) |
| Rock uplift | surface uplift (rock uplift minus erosion) and exhumation (erosion) |
| Glacio-isostatic rebound (unloading) | tectonic uplift |
| High HI from active uplift | high HI from resistant rock (check geology) |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper.
Level 1: Foundation
- What is a strath terrace?
- What is a colluvial wedge, in a paleoseismic trench?
- Is a mountain front with \( S_{mf} = 3.2 \) likely to be active?
Answers
- A bedrock surface planed by a river, with a thin gravel cover, abandoned when the river incised.
- A wedge of debris shed from a fresh fault scarp after an earthquake; each wedge usually records one event.
- No: a highly embayed front indicates erosion has outpaced uplift, so the front is relatively inactive.
Level 2: Part B Style
Practice Q1. A sag pond along a strike-slip fault forms at a:
(a) restraining bend (b) releasing bend (c) fault tip (d) thrust ramp
Answer: (b)
A releasing bend or step-over is locally extensional, so the ground subsides and holds water. A restraining bend is compressional and builds a pressure ridge.
Practice Q2. A drainage basin of 120 km\(^2\) has 36 km\(^2\) on the right of the trunk stream (looking downstream). Its asymmetry factor and the inferred tilt are:
(a) 30; tilt toward the right (b) 30; tilt toward the left (c) 70; tilt toward the right (d) 70; tilt toward the left
Answer: (a)
\( AF = 100 \times 36/120 = 30 \). The right-hand side is small, so the trunk stream has migrated toward the right divide, which is the down-tilted side.
Practice Q3. A surface rupture of 60 km is mapped. Using \( M = 5.08 + 1.16\log_{10}(\text{SRL}) \), the estimated magnitude is closest to:
(a) 6.2 (b) 6.6 (c) 7.1 (d) 7.9
Answer: (c) 7.1
\( \log_{10}60 = 1.778 \); \( 1.16 \times 1.778 = 2.06 \); \( 5.08 + 2.06 = 7.14 \).
Practice Q4. A notch across a ridge, now dry, with old river gravels on its floor, while the river flows around the ridge’s nose, is a:
(a) water gap (b) wind gap (c) shutter ridge (d) triangular facet
Answer: (b)
A wind gap is an abandoned water gap: the ridge (often a growing anticline) rose faster than the river could cut down, so the river was diverted and left its gravels in the notch.
Level 3: Part C Style
Practice Q5. On an uplifting coast, a marine terrace dated to the Last Interglacial (125 ka) has its shoreline angle at 70 m. Take palaeo-sea level at that time as +6 m relative to today, and assume a constant uplift rate. Which statements are correct?
- The uplift rate is about 0.51 m kyr\(^{-1}\).
- Ignoring palaeo-sea level would give about 0.56 m kyr\(^{-1}\).
- A mid-Holocene shoreline (6 ka, sea level then close to present) should now stand about 3 m above sea level.
- If the coast had instead been subsiding, the MIS 5e terrace would be found above +6 m.
(a) 1 and 3 only (b) 1, 2 and 3 only (c) 2 and 4 only (d) 1, 2, 3 and 4
Answer: (b) 1, 2 and 3 only
- 1: \( U = (70 - 6)/125 = 0.512 \) m kyr\(^{-1}\) (0.51 mm yr\(^{-1}\)). True.
- 2: \( 70/125 = 0.56 \) m kyr\(^{-1}\). True (and an overestimate).
- 3: \( 0.512 \times 6 \approx 3.1 \) m. True.
- 4: on a subsiding coast the terrace would be below +6 m, possibly submerged. False.
Practice Q6. A trench across a thrust scarp reveals three surface-rupturing events, dated (from the youngest faulted and oldest unfaulted layers) at about 1.2 ka, 3.9 ka and 6.5 ka. Each event produced about 4 m of slip. Nearby, a terrace riser 10 ka old is offset 15 m. Which statements are correct?
- The slip rate from the terrace riser is 1.5 mm yr\(^{-1}\).
- The recurrence interval implied by slip per event and slip rate is about 2.7 kyr.
- The mean interval between the dated events is consistent with that estimate.
- The next event can be predicted to occur 2.7 kyr after 1.2 ka, that is, about 1,500 years from now, to within a few decades.
(a) 1, 2 and 3 only (b) 1 and 4 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4
Answer: (a) 1, 2 and 3 only
- 1: \( 15\ \text{m}/10\ \text{kyr} = 1.5 \) m kyr\(^{-1}\) = 1.5 mm yr\(^{-1}\). True.
- 2: \( 4/1.5 \approx 2.67 \) kyr. True.
- 3: intervals \( 3.9 - 1.2 = 2.7 \) and \( 6.5 - 3.9 = 2.6 \) kyr, mean about 2.65 kyr. True.
- 4: recurrence on real faults is irregular, and event dates themselves carry uncertainties of centuries. Paleoseismology gives probabilities, not dates. False.
Practice Q7. Three adjacent mountain fronts are measured:
| Front | \( S_{mf} \) | \( V_f \) | HI of basins | Lithology |
|---|---|---|---|---|
| P | 1.15 | 0.4 | 0.58 | sandstone and mudstone |
| Q | 2.9 | 2.6 | 0.31 | sandstone and mudstone |
| R | 1.3 | 0.5 | 0.62 | massive quartzite |
Which interpretation is best?
(a) All three fronts are equally active. (b) P is clearly active; Q is inactive; R has active-looking values, but resistant quartzite could explain them, so independent evidence (dated terraces, faulted young deposits) is needed. (c) R is the most active because its HI is highest. (d) Q is the most active because its \( V_f \) is highest.
Answer: (b)
P and Q share the same lithology, so their contrast is tectonic: P has a straight front, narrow valleys and high HI; Q is embayed, broad-valleyed and dissected. R’s values resemble P’s, but massive quartzite resists erosion and can keep fronts straight and valleys narrow without uplift. (c) and (d) misread the direction or ignore the lithological confounder.
Quick Revision Table
| Tool | Formula or rule | Active means |
|---|---|---|
| Mountain-front sinuosity | \( S_{mf} = L_{mf}/L_s \) | close to 1 (below about 1.4) |
| Valley floor width–height ratio | \( V_f = 2V_{fw}/[(E_{ld} - E_{sc}) + (E_{rd} - E_{sc})] \) | below about 1 (V-shaped) |
| Stream length–gradient | \( SL = (\Delta H/\Delta L)L \) | anomalously high (check lithology) |
| Steepness | \( S = k_s A^{-\theta} \); \( k_{sn} \) at \( \theta = 0.45 \) | high \( k_{sn} \) |
| Asymmetry factor | \( AF = 100A_r/A_t \) | far from 50; tilt toward the smaller side |
| Elongation ratio | \( R_e = (2/L_b)\sqrt{A/\pi} \) | low (elongated) |
| Hypsometric integral | \( (\bar{z} - z_{\min})/(z_{\max} - z_{\min}) \) | high |
| Strath incision | height / age | approximates rock uplift |
| Marine terrace uplift | \( (E - S)/t \) | subtract palaeo-sea level |
| Slip rate, recurrence | offset / age; slip per event / slip rate | |
| Magnitude | \( M = 5.08 + 1.16\log_{10}\text{SRL} \) | |
| India | HFT and MHT; Shillong pop-up (1897); Kachchh (1819 Allah Bund, 2001 Bhuj); Narmada–Son; Andaman 2004 |
Key Takeaways
What’s Next
You have now covered every line of the unit. Consolidate it on the Quaternary Geology: Quick Revision sheet, then go back to the chapter overview to see how the topics connect. For the structural background of the Himalayan front, revisit Himalayan Orogeny and Supercontinents.