Folds, Boudins, Foliations, Lineations and Superposed Folding
CSIR NET Geology Part C: fold geometry and Ramsay classes, buckling and Biot wavelength, boudinage, cleavage and lineation types, superposed-fold interference.
- 18 min
On this page · 15 sections
Prerequisites
- Basic fold terms (hinge, limb, axial surface, anticline, syncline) from Stress, Strain, Folds, Joints and Faults.
- The strain ellipsoid, \( XY \) plane and \( X \) direction from Strain Ellipsoid, Tectonic Fabrics and Strain Analysis: foliations and lineations are read against them.
- Pressure solution and recrystallisation from Deformation Mechanisms and Shear Zones: they make cleavage.
- Way-up criteria (superposition, cross-bedding, graded bedding) from Stratigraphy, Origin of Life and the Fossil Record.
The Hook: A Mushroom in the Outcrop
Fold Geometry
Descriptive terms
| Term | Meaning |
|---|---|
| Hinge line | line of maximum curvature on a folded surface |
| Axial surface | surface containing the hinge lines of successive layers |
| Fold axis | for a cylindrical fold, the line which, moved parallel to itself, generates the folded surface; parallel to the hinge line |
| Antiform / synform | closes upward / downward, regardless of age of layers |
| Anticline / syncline | older / younger rocks in the core (needs way-up evidence) |
| Facing | direction, along the axial surface and normal to the hinge, in which beds young |
| Vergence | the sense of asymmetry of a fold (the direction its upper part leans) |
| Parasitic folds | small folds on the limbs of a larger fold; S, Z and M shapes (looking down the plunge) |
Parasitic folds are Z-shaped on one limb, S-shaped on the other, M-shaped (symmetric) at the hinge. Their vergence points towards the hinge of the larger antiform. This is a standard tool for locating major fold hinges in poorly exposed ground.
A synformal anticline (older rocks in the core of a downward-closing fold) or an antiformal syncline means the sequence is inverted, usually by earlier recumbent folding.
Classification by interlimb angle (Fleuty)
| Interlimb angle | Name |
|---|---|
| 180–120° | gentle |
| 120–70° | open |
| 70–30° | close |
| 30° to just above 0° | tight |
| 0° | isoclinal |
| negative (limbs diverge past parallel) | elastica (fan-shaped) |
Classification by orientation (Fleuty)
Using dip of the axial surface and plunge of the hinge line:
| Dip of axial surface | Name | Plunge of hinge | Name | |
|---|---|---|---|---|
| 80–90° | upright | 0–10° | horizontal | |
| 60–80° | steeply inclined | 10–30° | gently plunging | |
| 30–60° | moderately inclined | 30–60° | moderately plunging | |
| 10–30° | gently inclined | 60–80° | steeply plunging | |
| 0–10° | recumbent | 80–90° | vertical |
A reclined fold has a hinge plunging down the dip of an inclined axial surface. Overturned folds have one limb rotated past vertical. A monocline has one steep limb in otherwise flat-lying beds.
Ramsay’s classification by dip isogons
Dip isogons join points of equal dip on the outer and inner arcs of a folded layer. Two thickness ratios are used, at limb dip \( \alpha \):
- \( t'_\alpha = t_\alpha/t_0 \): orthogonal thickness relative to the hinge;
- \( T'_\alpha = T_\alpha/T_0 \): thickness parallel to the axial surface relative to the hinge; \( T'_\alpha = t'_\alpha/\cos\alpha \).
| Class | Dip isogons | \( t'_\alpha \) | Example |
|---|---|---|---|
| 1A | strongly convergent (towards the core) | \( > 1 \) | thinned hinge, thick limbs |
| 1B (parallel) | convergent, normal to layers | \( = 1 \) | concentric folds of competent layers |
| 1C | weakly convergent | between \( \cos\alpha \) and 1 | flattened parallel folds |
| 2 (similar) | parallel to each other | \( = \cos\alpha \) (\( T'_\alpha = 1 \)) | passive folds, slaty rocks |
| 3 | divergent | \( < \cos\alpha \) | incompetent layers between competent ones |
Competent layers tend to form class 1B–1C folds; incompetent layers between them form class 3 folds. Alternating layers together give an overall class 2 pattern.
Analysing folds on a stereonet
- In a π-diagram, poles to bedding from a cylindrical fold fall on a great circle (the π-circle). The pole to that great circle is the fold axis.
- In a β-diagram, great circles of bedding intersect at the fold axis (β).
- The axial plane contains the fold axis and bisects the limbs (for symmetric folds).
- Poles scattered on a small circle or with no clear girdle point to a non-cylindrical or refolded fold.
How Folds Form
Buckling and the dominant wavelength
A competent layer of viscosity \( \mu_L \) embedded in a weaker matrix of viscosity \( \mu_M \), shortened parallel to its length, buckles. M. A. Biot and H. Ramberg showed that one wavelength grows fastest, the dominant wavelength:
$$\boxed{L_d = 2\pi t\left(\frac{\mu_L}{6\mu_M}\right)^{1/3}}$$where \( t \) is the layer thickness. Two points follow:
- \( L_d/t \) depends only on the viscosity contrast, so thick layers make large folds and thin layers small ones. That is why fold wavelength scales with layer thickness in the field.
- A large contrast (over about 100) gives clear buckle folds; a small contrast gives layer-parallel thickening with only low-amplitude folds.
Strain within a buckled layer
| Mechanism | Description | Resulting fold |
|---|---|---|
| Flexural slip | layers slide past one another along bedding, like bending a deck of cards | parallel (1B); slickensides on bedding perpendicular to the hinge |
| Flexural flow | shear distributed within incompetent layers | 1B–1C |
| Tangential longitudinal strain | outer arc extended, inner arc shortened, separated by a neutral surface | 1B; outer-arc extension veins and normal faults, inner-arc thrusts and cleavage |
| Passive (similar) folding | layering is a passive marker in heterogeneous flow; no competence contrast | class 2 |
| Flattening of buckle folds | homogeneous shortening superimposed after buckling | 1C, tighter folds |
| Kinking | sharp-hinged, straight-limbed folds in strongly anisotropic rocks | kink bands, chevron folds |
| Bending | force applied across the layering (for example over a rising block) | drape folds, forced folds |
Sheath folds
In high-strain simple shear, fold hinges rotate towards the shear (stretching) direction. Strongly curved hinges become tube-like sheath folds with eye-shaped cross-sections in the YZ section. Their long axes are close to the stretching lineation, so fold hinges and \( X \) become parallel. They are an indicator of high shear strain in shear zones.
Boudinage
Boudins form when a competent layer in a less competent matrix is stretched parallel to its layering. The layer necks and separates into segments, like a string of sausages (boudin is French for a type of sausage).
| Type | Appearance | Conditions |
|---|---|---|
| Pinch-and-swell | layer thins and thickens without separating | low competence contrast |
| Drawn (necked) boudins | tapered ends, lens-shaped or barrel-shaped | moderate contrast, ductile necking |
| Torn (blocky) boudins | rectangular segments with sharp fractures | high contrast, brittle layer |
| Chocolate-tablet boudinage | two sets of necks at about right angles | extension in two directions within the layer (flattening) |
| Domino boudins | blocks rotated, separated by antithetic slip | asymmetric; layer oblique to the extension |
| Shearband boudins | separated along synthetic shear surfaces, lens-shaped | asymmetric; common in mylonites |
| Foliation boudinage | boudins in an already foliated rock without a distinct layer | anisotropy of the foliation itself |
Features:
- The space between boudins (the neck) is often filled with quartz or calcite, precipitated as the gap opened, or with matrix that flowed in, forming scar folds.
- In one-direction boudinage, the boudin axes (neck lines) are perpendicular to the extension direction: a neck lineation lies normal to \( X \).
- Boudins form in the extension field of the strain ellipsoid; folds of the same layer form in the shortening field. A layer that has been folded and then boudinaged (or vice versa) records rotation through these fields.
- Asymmetric (domino and shearband) boudins give a shear sense.
Foliations
Classification
| Foliation | Description | Common origin |
|---|---|---|
| Bedding (S\(_0\)) | primary layering | sedimentation |
| Disjunctive (spaced) cleavage | discrete cleavage domains (dark, insoluble-rich seams) separated by microlithons with little change | pressure solution; low grade |
| Slaty cleavage | continuous, penetrative fabric of aligned fine phyllosilicates | low-grade metamorphism of mudrocks; approximately the \( XY \) plane |
| Phyllitic and schistosity | coarser aligned micas (phyllite sheen, then visible micas) | increasing metamorphic grade |
| Crenulation cleavage | an earlier foliation micro-folded, with new cleavage along the limbs | second deformation (S\(_2\)); zonal (gradational) or discrete |
| Gneissic layering | alternating light and dark mineral bands | high-grade metamorphism, segregation, transposition |
| Mylonitic foliation | fine-grained, layered, with a strong lineation | ductile shear zones |
Cleavage forms by mechanical rotation of grains, pressure solution with removal of soluble material, and recrystallisation and growth of minerals in the preferred orientation. Spaced pressure-solution cleavage may imply volume loss.
Cleavage and folds
- Axial-planar cleavage forms parallel (or nearly) to the axial surfaces of folds formed in the same event.
- Cleavage refraction: in competent layers cleavage is at a higher angle to bedding and tends to fan so that it converges towards the fold core; in incompetent layers it lies closer to the axial surface or fans the other way.
- Transected folds: cleavage cuts across the axial surface at a small angle. This indicates that cleavage and folding were not exactly coeval; transpression is one proposed cause.
- Bedding–cleavage intersection lineation is parallel to the fold hinge in a non-transected fold.
Bedding–cleavage relationships tell you where you are on a fold. For a fold with steep axial-planar cleavage:
| Observation | Interpretation |
|---|---|
| Cleavage dips more steeply than bedding, both in the same direction | right-way-up limb |
| Bedding dips more steeply than cleavage, both in the same direction | overturned limb |
| Cleavage perpendicular to bedding | hinge zone |
The acute angle between bedding and cleavage points towards the hinge of the adjacent antiform or synform. Combine this with way-up criteria to determine facing.
Lineations
| Lineation | Formed by | Relation to strain or structure |
|---|---|---|
| Intersection | intersection of two planes (e.g. bedding and cleavage) | parallel to the fold hinge for axial-planar cleavage |
| Crenulation | hinges of microfolds of an earlier foliation | parallel to F\(_2\) hinges |
| Mineral (mineral-elongation) | preferred alignment of elongate minerals (amphibole, sillimanite) | often parallel to \( X \) |
| Stretching | elongated pebbles, ooids, aggregates, pressure shadows | parallel to \( X \); in shear zones close to the transport direction |
| Boudin neck | neck lines of boudins | perpendicular to the extension direction |
| Mullions | large cylindrical corrugations at the interface of competent and incompetent rock | parallel to fold hinges |
| Rods | elongate bodies of segregated material (often quartz) | usually parallel to fold hinges |
| Slickenlines | striations or fibres on fault surfaces | parallel to slip direction |
Lineations are not all the same kind: a stretching lineation records the \( X \) direction, an intersection lineation records geometry only. Confusing the two is a standard error in kinematic interpretation.
Superposed Folding
When an area is folded twice, early folds (F\(_1\)) with their axial-planar foliation (S\(_1\)) and lineation (L\(_1\)) are refolded by F\(_2\) with S\(_2\) and L\(_2\). The notation numbers structures in order of formation in that area; F\(_2\) in one area need not be the same age as F\(_2\) somewhere else.
Ramsay’s interference patterns
The pattern depends on the orientations of the F\(_2\) axis and slip direction relative to the F\(_1\) fold:
| Type | Geometry | Outcrop pattern | Mnemonic |
|---|---|---|---|
| 0 | F\(_2\) coaxial and coplanar with F\(_1\) | F\(_1\) simply tightened; no interference visible | “zero: you can’t see it” |
| 1 | F\(_1\) and F\(_2\) both upright with axes at a high angle | dome-and-basin (egg-carton) | “1: one egg box” |
| 2 | F\(_2\) upright with axis at a high angle to F\(_1\) hinge; F\(_1\) axial surface inclined to recumbent | mushroom, crescent, boomerang | “2: two caps on a mushroom” |
| 3 | F\(_2\) axis parallel to F\(_1\) axis; F\(_1\) axial surface recumbent, F\(_2\) upright | hook or refolded isocline (“convergent–divergent”) | “3: a fish hook” |
graph TD
A[Two fold generations] --> B{F2 axis parallel to F1 axis?}
B -- Yes --> C{F1 and F2 axial surfaces parallel?}
C -- Yes --> D[Type 0: redundant, coaxial]
C -- No --> E[Type 3: hook]
B -- No --> F{F1 axial surface upright?}
F -- Yes --> G[Type 1: dome and basin]
F -- No, recumbent or inclined --> H[Type 2: mushroom or crescent]Recognising superposition
- Refolded axial traces of F\(_1\) on a map; folded S\(_1\) with S\(_2\) crenulation cleavage.
- L\(_1\) lineations are folded around F\(_2\) hinges. If F\(_2\) folding was flexural, L\(_1\) lies along a small circle about the F\(_2\) axis on a stereonet. If F\(_2\) was passive (similar), L\(_1\) lies on a great circle containing the F\(_2\) slip direction.
- Overprinting: S\(_2\) cuts S\(_1\); porphyroblasts with internal S\(_1\) inclusion trails and external S\(_2\).
- Fold axes are spread out on a stereonet (non-cylindrical), and the π-diagram has no single girdle. Divide the area into domains in which F\(_1\) is cylindrical and analyse each separately.
Memory Tricks
Don’t Confuse
| This | With this | Difference |
|---|---|---|
| Antiform | Anticline | closes upward versus older rocks in core |
| Class 1B (parallel) | Class 2 (similar) | constant orthogonal thickness versus constant axial-parallel thickness |
| Fold axis | Axial surface | a line versus a plane |
| Vergence | Facing | asymmetry sense versus younging direction |
| Slaty cleavage | Crenulation cleavage | first, continuous foliation versus micro-folding of an earlier foliation |
| Stretching lineation | Intersection lineation | parallel to \( X \) versus a geometric intersection |
| Pinch-and-swell | Boudinage | low contrast, no separation versus separation into segments |
| Type 2 interference | Type 3 interference | F\(_2\) axis at high angle to F\(_1\) versus coaxial with F\(_1\) |
Common Mistakes
Practice
All questions below are original practice questions written for these notes.
Level 1: Foundation
- Practice. A fold has an interlimb angle of 50°. Name it by Fleuty’s scheme.
- Practice. In which Ramsay class are dip isogons parallel to one another?
- Practice. Which interference type gives a dome-and-basin pattern?
Answers
- Close (70–30°).
- Class 2 (similar folds).
- Type 1.
Level 2: Part B Style
Practice Q4. On a limb dipping 40°, the orthogonal thickness of a folded layer is 0.6 times its hinge thickness. The fold class is:
(a) 1A (b) 1C (c) 2 (d) 3
Answer: (d) 3
\( \cos 40° = 0.766 \). \( t'_\alpha = 0.6 < \cos\alpha \), so isogons diverge: class 3, typical of an incompetent layer. A value of 0.766 would be class 2.
Practice Q5. A 20 cm competent layer with viscosity 1,000 times that of the matrix buckles. The dominant wavelength (Biot) is closest to:
(a) 1.3 m (b) 3.5 m (c) 6.9 m (d) 12.6 m
Answer: (c)
\( L_d = 2\pi(0.2)(1000/6)^{1/3} = 1.257\times 5.50 = 6.9 \) m. Option (b) uses \( t = 0.1 \) m; (d) omits the factor 6.
Practice Q6. In an area of upright folds with axial-planar slaty cleavage, an outcrop shows bedding dipping 40° E and cleavage dipping 70° E. Which statement is correct?
(a) The beds are overturned (b) The beds are the right way up (c) The outcrop is in the fold hinge (d) Nothing can be said without fossils
Answer: (b)
Cleavage steeper than bedding with the same dip direction indicates a right-way-up limb. If bedding were steeper than cleavage, the limb would be overturned.
Practice Q7. Poles to bedding measured around a cylindrical fold plot along a great circle striking 090° and dipping 70° N. The fold axis:
(a) plunges 70° towards 000° (b) plunges 20° towards 180° (c) plunges 20° towards 000° (d) is horizontal, trending 090°
Answer: (b)
The fold axis is the pole to the π-circle. A plane dipping 70° N has its pole plunging \( 90° - 70° = 20° \) in the opposite direction, towards 180°.
Level 3: Part C Style
Practice Q8. In a folded multilayer, three isolated sandstone layers in the same shale show:
| Layer | Thickness (cm) | Fold wavelength (cm) |
|---|---|---|
| A | 5 | 100 |
| B | 10 | 205 |
| C | 20 | 395 |
Which statements are correct?
- The constant ratio \( L/t \approx 20 \) is consistent with buckling governed by the dominant wavelength.
- The viscosity ratio of sandstone to shale is roughly 190.
- If the layers had folded passively, wavelength would still scale with layer thickness.
- Subsequent homogeneous flattening would shorten wavelengths and tighten the folds, moving them towards class 1C.
(a) 1 and 2 only (b) 1, 2 and 4 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4
Answer: (b) 1, 2 and 4 only
- 1 true: \( L/t \) = 20, 20.5, 19.75, nearly constant, as buckling theory predicts.
- 2 true: \( \mu_L/\mu_M = 6(L/2\pi t)^3 = 6(3.18)^3 \approx 190 \).
- 3 false: passive folds have no preferred wavelength linked to thickness; that link is the signature of buckling.
- 4 true: homogeneous shortening after buckling reduces wavelength and changes parallel folds towards 1C.
Practice Q9. In a gneiss terrain, a map shows closed, crescent-shaped outcrops of a quartzite marker. On a stereonet, F\(_1\) mineral lineations lie on a great circle, and F\(_2\) folds are upright with axes at a high angle to the F\(_1\) hinges. The F\(_1\) folds are recumbent isoclines. The most consistent interpretation is:
(a) Type 1 interference; F\(_2\) folding by flexural slip (b) Type 2 interference; F\(_2\) folding was largely passive (similar) (c) Type 3 interference; F\(_2\) coaxial with F\(_1\) (d) A single fold generation, because crescents form in sheath folds only
Answer: (b)
Recumbent F\(_1\) refolded by upright F\(_2\) with axes at a high angle gives Type 2 (mushroom, crescent). L\(_1\) on a great circle points to passive (similar) F\(_2\) folding; flexural folding would put L\(_1\) on a small circle. Type 3 requires coaxial folds. Sheath folds can also give closed shapes, but the two distinct fold sets with overprinting rule out (d).
Practice Q10. Which statements about boudinage are correct?
- Chocolate-tablet boudinage indicates extension in two directions within the layer.
- Boudin neck lines are parallel to the stretching direction \( X \).
- Torn boudins with sharp fractures imply a larger competence contrast than pinch-and-swell.
- Domino and shearband boudins can give a sense of shear.
(a) 1, 3 and 4 only (b) 1 and 2 only (c) 2 and 3 only (d) 1, 2, 3 and 4
Answer: (a) 1, 3 and 4 only
- 1 true: two sets of necks mean extension in two in-plane directions (flattening strain).
- 2 false: necks are perpendicular to the extension direction.
- 3 true: brittle separation needs a strong, stiff layer; pinch-and-swell forms at low contrast.
- 4 true: asymmetric boudins are kinematic indicators.
Quick Revision Table
| Idea | Fact or formula |
|---|---|
| Interlimb angle | gentle > 120°, open 120–70°, close 70–30°, tight < 30°, isoclinal 0°, elastica negative |
| Orientation | upright 80–90°, recumbent 0–10° axial-surface dip; plunge classes 10, 30, 60, 80° |
| Ramsay classes | 1A \( t' > 1 \); 1B \( t' = 1 \); 1C \( \cos\alpha < t' < 1 \); 2 \( t' = \cos\alpha \); 3 \( t' < \cos\alpha \) |
| π-diagram | poles to bedding on a great circle; its pole = fold axis |
| Biot | \( L_d = 2\pi t(\mu_L/6\mu_M)^{1/3} \) |
| Fold mechanisms | flexural slip, flexural flow, tangential longitudinal strain, passive, kink, bending |
| Parasitic folds | Z (left limb), M (hinge), S (right limb) across an antiform looking down plunge; vergence towards the antiform hinge |
| Boudins | pinch-and-swell, drawn, torn, chocolate tablet, domino, shearband; necks normal to \( X \) |
| Foliations | spaced, slaty, schistosity, crenulation, gneissic, mylonitic |
| Bedding–cleavage | cleavage steeper = normal limb; bedding steeper = overturned |
| Lineations | intersection, crenulation, mineral, stretching (∥ \( X \)), boudin neck, mullion, rod, slickenline |
| Interference | 0 coaxial-coplanar; 1 dome-basin; 2 mushroom; 3 hook |
| Refolded L\(_1\) | small circle (flexural F\(_2\)); great circle (passive F\(_2\)) |
Key Takeaways
What’s Next
- Extensional, Compressional and Strike-Slip Terrains; Mantle Plumes: how these structures combine at the scale of rifts, thrust belts and transforms.
- Himalayan Orogeny and Supercontinents: a working example of polyphase deformation.
- Back to the Structural Geology and Geotectonics overview.