Himalayan Orogeny and Supercontinents
CSIR NET Geology Part C: India-Asia collision, Himalayan units and thrusts, inverted metamorphism, channel flow, Tibet; Wilson cycle, Rodinia, Gondwana, Pangea.
- 18 min
On this page · 11 sections
Prerequisites
- Thrust-system rules, critical taper and strike-slip faults from Extensional, Compressional and Strike-Slip Terrains; Mantle Plumes.
- Shear zones and inverted metamorphism context from Deformation Mechanisms and Shear Zones.
- Airy isostasy and the dipole formula \( \tan I = 2\tan\lambda \) from Gravity, Geomagnetism, Heat Flow and Isostasy.
- The geological time scale from Geological Time Scale and Radiometric Dating.
The Hook: Marine Fossils at 8,000 Metres
The India–Asia Collision
From Gondwana to Asia
After India rifted from Gondwana in the Cretaceous, it moved rapidly north, closing the Neo-Tethys ocean by subduction beneath the southern margin of Asia. Subduction built an Andean-type magmatic arc along Asia’s margin: the Transhimalayan batholiths (Ladakh batholith in India, Gangdese batholith in Tibet), mainly Cretaceous to Eocene. In the west, an intra-oceanic island arc (the Kohistan–Ladakh arc) was caught between the two continents.
When continental India arrived at the trench, its buoyant crust could not be subducted far. Collision began, India’s northward speed dropped sharply, and convergence continued by crustal thickening, thrusting and lateral escape of Asian crust.
| Event | Approximate timing (most cited estimates) |
|---|---|
| India separates from Antarctica–Australia | Early Cretaceous |
| India separates from Madagascar | Late Cretaceous |
| Fast northward drift of India | Late Cretaceous to early Paleogene |
| Deccan Traps erupt; Seychelles separate from India | around 66–62 Ma |
| Onset of India–Asia collision | most estimates about 50–55 Ma; a range from about 60 to about 35 Ma has been argued |
| Main Central Thrust and South Tibetan Detachment active; leucogranites emplaced | Miocene |
| Present convergence across the Himalaya | about 2 cm yr\(^{-1}\) (GPS) |
The timing of collision is debated because “collision” can be dated in different ways: the first arrival of Asian detritus on India, the end of marine sedimentation, the slowdown in India’s motion, or the age of ultrahigh-pressure metamorphism.
Tectonic units from south to north
graph TD
A[Indo-Gangetic foreland basin] -->|Main Frontal Thrust| B[Sub-Himalaya: Siwalik Group molasse]
B -->|Main Boundary Thrust| C[Lesser Himalaya: mainly Proterozoic low-grade sediments]
C -->|Main Central Thrust| D[Higher Himalayan Crystallines: high-grade gneiss, migmatite, leucogranite]
D -->|South Tibetan Detachment System, normal sense| E[Tethyan Himalaya: fossiliferous Neoproterozoic to Eocene sediments]
E -->|Indus-Tsangpo Suture Zone| F[Transhimalaya: Ladakh and Gangdese batholiths, Asian margin]| Unit | Rocks | Bounding fault (to the south) |
|---|---|---|
| Sub-Himalaya (Siwaliks) | Neogene–Quaternary fluvial molasse (sandstone, mudstone, conglomerate) shed from the rising mountains; folded and thrust | Main Frontal Thrust (MFT, also Himalayan Frontal Thrust): the youngest, active thrust at the mountain front |
| Lesser Himalaya | mainly Proterozoic sedimentary and low-grade metasedimentary rocks, with some granites and klippen of crystalline rocks | Main Boundary Thrust (MBT) |
| Higher (Greater) Himalayan Crystallines | kyanite- and sillimanite-grade gneisses, migmatites, Miocene leucogranites | Main Central Thrust (MCT): a thick ductile shear zone with top-to-south sense |
| Tethyan (Tethys) Himalaya | thick Neoproterozoic to Eocene passive-margin sediments of India’s northern margin, rich in fossils (Spiti and Zanskar are classic sections) | South Tibetan Detachment System (STDS): north-dipping, normal-sense (top-to-north) faults and shear zones |
| Indus–Tsangpo Suture Zone | ophiolites (for example Spontang and Nidar in Ladakh), mélange, Indus molasse | the suture between India and Asia |
| Transhimalaya | Ladakh–Gangdese batholiths, arc volcanics | Asian plate |
Sequence of thrusting: the thrusts get younger towards the south (foreland): MCT (mainly Miocene) → MBT → MFT (active). This is the piggy-back (in-sequence) order of a foreland-propagating thrust belt.
The Main Himalayan Thrust (MHT) is the basal décollement. The MFT, MBT and MCT all root into it at depth. Great Himalayan earthquakes, including the 2015 Gorkha (Nepal) earthquake of about \( M_w \) 7.8, rupture parts of the MHT.
Inverted metamorphism
Across the MCT zone, metamorphic grade increases structurally upward: from chlorite and biotite zones in the Lesser Himalaya through garnet, staurolite and kyanite to sillimanite and migmatite in the Higher Himalaya. Hotter rocks lie above colder ones, the reverse of a normal geotherm.
| Model | Idea |
|---|---|
| Hot-iron (thrusting of hot over cold) | the hot Higher Himalayan slab heats the rocks below it |
| Shear heating | frictional and viscous heating on the MCT |
| Post-metamorphic folding or imbrication | normal isograds folded or stacked by later thrusts |
| Channel flow and ductile extrusion | the high-grade sequence was extruded as a coherent slab, preserving its metamorphic profile upside-down relative to the units below |
How the Higher Himalaya was exhumed
- Channel flow (C. Beaumont and co-workers, 2001): mid-crustal rocks beneath Tibet were partly molten and weak; they flowed south in a channel bounded by the MCT below and the STDS above, and focused erosion at the Himalayan front drew them to the surface.
- Wedge extrusion: a rigid or ductile wedge extruded between the two faults.
- Critical taper: the Himalaya as a wedge growing by accretion at its front and duplexing at depth (for example the Lesser Himalayan duplex), with out-of-sequence thrusting to maintain taper.
These are not mutually exclusive; many workers see channel flow in the Miocene followed by wedge behaviour later.
Tibet and lateral escape
The Tibetan Plateau averages about 5 km in elevation over crust about twice the normal thickness (about 70 km). Two classic ideas explain how India’s continued penetration is accommodated:
- Crustal thickening of Tibet, isostatically supporting the plateau.
- Lateral extrusion (escape tectonics): P. Molnar and P. Tapponnier (1975) compared India to a rigid indenter pushing into Asia, with blocks of Asia squeezed east along great strike-slip faults (Altyn Tagh, Kunlun, Red River and others). The Karakoram Fault in the west is dextral; the Altyn Tagh is sinistral.
Southern Tibet today is extending east–west on north–south rifts, showing that the plateau has reached a height at which gravitational forces resist further thickening.
Other features
- Ultrahigh-pressure (UHP) rocks: coesite-bearing eclogites at Tso Morari (Ladakh) and Kaghan (Pakistan) show that the leading edge of India was subducted to depths of about 100 km or more early in the collision and then returned to the surface.
- Syntaxes: at its western (Nanga Parbat) and eastern (Namche Barwa) ends, the range bends sharply. Both syntaxes have exceptionally young metamorphism and rapid exhumation, linked to deep river incision (the Indus and the Yarlung Tsangpo–Brahmaputra).
- Foreland basin: the Indo-Gangetic plain is a flexural foreland basin formed as the Indian plate bends under the load of the mountains.
- Great earthquakes (commonly cited magnitudes): 1905 Kangra (about \( M \) 7.8), 1934 Bihar–Nepal (about 8), 1950 Assam (about 8.6), 2005 Kashmir (about 7.6), 2015 Gorkha (about 7.8). A long stretch of the central Himalaya without a great earthquake in historical times is called the central seismic gap.
Supercontinents
The Wilson cycle and the supercontinent cycle
J. T. Wilson (1966) asked whether the Atlantic had closed and then reopened, after noting that fossils and rocks on either side of the Caledonian–Appalachian belt matched the “wrong” continents. The Wilson cycle is the life cycle of an ocean basin:
- Continental rifting (East Africa)
- Young narrow ocean (Red Sea)
- Mature ocean with passive margins (Atlantic)
- Subduction begins; ocean shrinks (Pacific)
- Narrow remnant ocean (Mediterranean)
- Continental collision and suture (Himalaya)
- Peneplanation, then rifting again, often along the old suture
The supercontinent cycle is the larger rhythm in which most continental crust repeatedly gathers into one mass and disperses, over a few hundred million years.
The supercontinents
| Supercontinent | Approximate time of existence | Assembled by | Notes |
|---|---|---|---|
| Kenorland / Superia (Neoarchean) | about 2.7–2.5 Ga | Neoarchean cratonisation | debated: one supercontinent or several separate “supercratons” |
| Columbia (Nuna) | about 1.8–1.5 Ga | worldwide collisional orogens about 2.1–1.8 Ga (Paleoproterozoic) | names proposed by Rogers and Santosh (Columbia) and Hoffman (Nuna) |
| Rodinia | about 1.0–0.75 Ga | Grenvillian-age orogens about 1.3–0.9 Ga | breakup in the Neoproterozoic, around the Cryogenian (“Snowball Earth”) glaciations |
| Gondwana (with Pannotia, a short-lived possible supercontinent) | from about 0.55 Ga | Pan-African and Brasiliano orogens (including the East African Orogen), about 0.65–0.5 Ga | southern continents: South America, Africa, Arabia, Madagascar, India, Sri Lanka, Antarctica, Australia |
| Pangea | about 0.32–0.18 Ga | Variscan (Hercynian), Alleghanian and Uralian orogens (Gondwana + Laurussia + Siberia) | breakup from the Early Jurassic; the Central Atlantic opened first |
| Future | in perhaps 200–250 Myr | — | Amasia, Pangea Proxima (Ultima), Novopangea and Aurica are competing models |
Laurasia was the northern half of Pangea (North America, Europe, Asia); Gondwana the southern half, separated by the Tethys. The name Gondwana comes from the Gond region of central India, where the Gondwana Supergroup (with Glossopteris flora) was described.
How supercontinents assemble
Two end-member modes have been proposed:
| Mode | Oceans that close | Example often given |
|---|---|---|
| Introversion | the young, interior oceans formed by the previous breakup | Pangea (closure of the Iapetus and Rheic oceans) |
| Extroversion | the old, exterior ocean that surrounded the previous supercontinent | Gondwana / Pannotia |
A third, orthoversion, puts the new supercontinent about 90° away from the centre of the previous one, along the great circle of subduction around it.
Evidence for past supercontinents
| Evidence | What it shows |
|---|---|
| Palaeomagnetism and apparent polar wander paths (APWPs) | when two continents share a segment of APWP, they moved together |
| Matching orogenic belts, cratons and dyke swarms across now-separated continents | former continuity |
| Detrital zircon U–Pb age peaks | crust preserved in pulses that coincide with supercontinent assembly (roughly 2.7, 1.9, 1.0, 0.6 and 0.3 Ga) |
| Passive-margin record | many margins form at breakup, few during assembly |
| Glacial deposits (tillites) and fossils (Glossopteris, Mesosaurus, Lystrosaurus) | Gondwana configuration |
| Global sea level and seawater \( ^{87}\text{Sr}/^{86}\text{Sr} \) | change with continental erosion and ridge activity |
India in the supercontinents
- Gondwana: India lay between Madagascar (west), East Antarctica (south-east) and Australia, with Sri Lanka to the south. The Pan-African (about 0.55 Ga) high-grade belts of southern India (the Southern Granulite Terrane, Kerala Khondalite Belt) continue into Madagascar, Sri Lanka and East Antarctica.
- Rodinia: the Eastern Ghats Belt of India is commonly correlated with the Rayner Complex of East Antarctica, both recording granulite metamorphism around 1.0 Ga.
- Columbia/Nuna: the Indian cratons (Dharwar, Bastar, Singhbhum, Bundelkhand–Aravalli) are thought to have been part of it, but their exact position is debated.
- Breakup: India–Madagascar left Antarctica–Australia in the Early Cretaceous (the Rajmahal Traps and the Kerguelen plume are associated); India separated from Madagascar in the Late Cretaceous; the Seychelles separated from India around the time of the Deccan eruptions; India then drifted north to collide with Asia.
Memory Tricks
Don’t Confuse
| This | With this | Difference |
|---|---|---|
| MCT | MBT | between Higher Himalaya and Lesser Himalaya (ductile, Miocene) versus between Lesser Himalaya and Siwaliks (younger, more brittle) |
| MFT | MHT | emergent frontal thrust at the mountain front versus the basal décollement into which all thrusts root |
| STDS | MCT | normal sense, north-dipping, top of the slab versus thrust sense, base of the slab |
| Indus–Tsangpo Suture | Shyok suture | India–arc (or India–Asia) suture versus arc–Asia suture north of Ladakh |
| Tethyan Himalaya | Transhimalaya | Indian passive-margin sediments versus Asian arc batholiths |
| Gondwana | Pangea | southern supercontinent, assembled about 0.55 Ga versus all continents, about 0.32–0.18 Ga |
| Rodinia | Columbia | about 1.0 Ga, Grenvillian versus about 1.8–1.5 Ga, Paleoproterozoic orogens |
| Wilson cycle | Supercontinent cycle | one ocean basin’s life versus global assembly and dispersal |
Common Mistakes
Practice
All questions below are original practice questions written for these notes.
Level 1: Foundation
- Practice. Which fault separates the Lesser Himalaya from the Higher Himalayan Crystallines?
- Practice. Which major Himalayan fault system has a normal sense of movement?
- Practice. Which supercontinent was assembled by Grenvillian-age orogens around 1.0 Ga?
Answers
- The Main Central Thrust (MCT).
- The South Tibetan Detachment System (STDS).
- Rodinia.
Level 2: Part B Style
Practice Q4. The correct south-to-north order of Himalayan tectonic units is:
(a) Siwaliks → Higher Himalaya → Lesser Himalaya → Tethyan Himalaya (b) Siwaliks → Lesser Himalaya → Higher Himalaya → Tethyan Himalaya (c) Lesser Himalaya → Siwaliks → Tethyan Himalaya → Higher Himalaya (d) Tethyan Himalaya → Higher Himalaya → Lesser Himalaya → Siwaliks
Answer: (b)
Siwaliks (south of the MBT), Lesser Himalaya (between MBT and MCT), Higher Himalaya (between MCT and STDS), Tethyan Himalaya (north of the STDS, south of the suture). Option (d) is the north-to-south order.
Practice Q5. If continental crust 35 km thick is doubled in thickness and is in Airy isostatic equilibrium (\( \rho_c = 2{,}800 \), \( \rho_m = 3{,}300 \) kg m\(^{-3}\)), the surface rises by about:
(a) 2.0 km (b) 5.3 km (c) 17.5 km (d) 35 km
Answer: (b)
\( h = \Delta T(\rho_m - \rho_c)/\rho_m = 35\times 500/3300 \approx 5.3 \) km. The remaining 29.7 km is the root.
Practice Q6. A palaeomagnetic sample has an inclination of magnitude 40°. Assuming a geocentric axial dipole, its palaeolatitude is about:
(a) 11° (b) 20° (c) 23° (d) 40°
Answer: (c)
\( \tan\lambda = \tan 40°/2 = 0.42 \), \( \lambda \approx 22.8° \). Setting latitude equal to inclination (d) is the standard error.
Practice Q7. The Pan-African orogeny is most directly associated with the assembly of:
(a) Columbia (b) Rodinia (c) Gondwana (d) Pangea
Answer: (c)
Pan-African and Brasiliano orogens (about 0.65–0.5 Ga) welded East and West Gondwana. Rodinia is linked to Grenvillian orogens; Pangea to Variscan, Alleghanian and Uralian orogens.
Level 3: Part C Style
Practice Q8. A traverse from the Lesser Himalaya into the Higher Himalayan Crystallines shows mineral zones in this structural order (base to top): chlorite → biotite → garnet → kyanite → sillimanite + melt. Shear-sense indicators in the MCT zone show top-to-south; those in a shear zone at the top of the crystallines show top-to-north. Which statements are correct?
- The metamorphic sequence is inverted.
- The opposite shear senses at the base and top are consistent with southward extrusion of the crystalline slab.
- The top-to-north shear zone is part of the South Tibetan Detachment System.
- Inverted metamorphism proves that the Higher Himalayan rocks were metamorphosed after thrusting.
(a) 1 and 2 only (b) 1, 2 and 3 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4
Answer: (b) 1, 2 and 3 only
- 1 true: grade increases upward.
- 2 true: thrust below and normal sense above means the slab moved south relative to both its floor and its roof.
- 3 true: the STDS is the top-to-north (normal) system at the top of the Higher Himalaya.
- 4 false: inverted metamorphism has several explanations (hot-iron thrusting, shear heating, folding of isograds, extrusion of a pre-metamorphosed slab). It does not prove a single sequence.
Practice Q9. Using the data of the worked example (site now at 20° N, a 60 Ma sample with inclination −40°, normal polarity), which statements are correct?
- The site was at about 23° S at 60 Ma.
- The average northward drift rate since 60 Ma is about 8 cm yr\(^{-1}\).
- Palaeomagnetism alone also gives the palaeolongitude of the site.
- If collision slowed India at about 50 Ma, the true pre-collision rate was greater than the average.
(a) 1 and 2 only (b) 1, 2 and 4 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4
Answer: (b) 1, 2 and 4 only
- 1 true: \( \lambda = \tan^{-1}(\tan 40°/2) \approx 22.8° \) S (negative inclination, normal polarity).
- 2 true: \( 42.8° \times 111 \) km \( \approx 4{,}750 \) km in 60 Myr \( \approx 7.9 \) cm yr\(^{-1}\).
- 3 false: a geocentric axial dipole is symmetric about the spin axis, so palaeomagnetism gives latitude and rotation, not longitude.
- 4 true: if the later part was slow, the earlier part had to be faster than the average to cover the same distance.
Practice Q10. GPS shows that a segment of the Main Himalayan Thrust is locked and accumulating a slip deficit of 18 mm yr\(^{-1}\). The last great earthquake on it was 500 years ago. If all of the deficit is released in one earthquake rupturing an area 200 km × 80 km (shear modulus \( 3\times 10^{10} \) Pa, \( M_w = \frac{2}{3}(\log_{10}M_0 - 9.1) \), \( M_0 \) in N m), its magnitude is closest to:
(a) 7.4 (b) 7.8 (c) 8.4 (d) 9.0
Answer: (c)
Slip deficit \( D = 0.018\times 500 = 9 \) m.
\( M_0 = \mu A D = 3\times 10^{10}\times(2\times 10^{5}\times 8\times 10^{4})\times 9 = 4.32\times 10^{21} \) N m.
\( M_w = \frac{2}{3}(21.64 - 9.1) \approx 8.36 \), so about 8.4. This kind of calculation is why the central seismic gap is a concern; real ruptures may release the deficit in several smaller events, and part of the convergence may be taken up aseismically.
Quick Revision Table
| Idea | Fact |
|---|---|
| Units S to N | Siwaliks, Lesser Himalaya, Higher Himalayan Crystallines, Tethyan Himalaya, Indus–Tsangpo Suture, Transhimalaya |
| Faults S to N | MFT, MBT, MCT (thrusts, young southward); STDS (normal); ITSZ (suture) |
| Basal décollement | Main Himalayan Thrust; MFT, MBT, MCT root into it |
| Collision onset | most estimates about 50–55 Ma (debated) |
| Present convergence across Himalaya | about 2 cm yr\(^{-1}\) |
| Inverted metamorphism | grade rises structurally upward across the MCT zone |
| Exhumation models | channel flow (Beaumont et al.), wedge extrusion, critical taper |
| UHP | coesite eclogites at Tso Morari and Kaghan |
| Ophiolites | Spontang, Nidar (Ladakh) in the suture zone |
| Tibet | about 5 km high, about 70 km crust; lateral extrusion (Molnar and Tapponnier); E–W extension today |
| Syntaxes | Nanga Parbat (west), Namche Barwa (east) |
| Supercontinents | Kenorland (about 2.7–2.5 Ga, debated), Columbia/Nuna (about 1.8–1.5 Ga), Rodinia (about 1.0–0.75 Ga), Gondwana (from about 0.55 Ga), Pangea (about 0.32–0.18 Ga) |
| Building orogens | Paleoproterozoic (Columbia), Grenvillian (Rodinia), Pan-African (Gondwana), Variscan/Alleghanian/Uralian (Pangea) |
| India links | Eastern Ghats–Rayner (Rodinia); Southern Granulite Terrane Pan-African (Gondwana) |
| Assembly modes | introversion, extroversion, orthoversion |
Key Takeaways
What’s Next
- Structural Geology and Geotectonics: Quick Revision: the whole chapter on one page.
- Stress, Mohr Circle, Failure Criteria and Fault Reactivation: revisit the mechanics behind thrusts and great earthquakes.
- The Earth Sciences overview for other Part B and Part C units.