Skip to content

Well Logging

CSIR NET Earth Sciences Part C geophysics: open-hole, cased-hole and production logging, SP, resistivity, porosity logs, Archie saturation and LWD.

4
Topics
87
Min read

Chapter Overview

Well Logging is a unit of the Geophysics section of Part C in CSIR NET Earth, Atmospheric, Ocean and Planetary Sciences (subject code 702). A well log is a continuous record, against depth, of a physical property of the rocks and fluids around a borehole. Logs are the main source of subsurface porosity, fluid saturation, lithology and correlation in petroleum, groundwater and mineral exploration, and they tie wells to seismic sections.

The unit is applied physics: electrochemistry for the SP, electromagnetism for resistivity and induction tools, nuclear physics for the gamma-ray, density and neutron tools, acoustics for the sonic, and heat conduction for temperature logs. It then becomes calculation: Archie’s equations turn resistivity and porosity into water saturation. Questions mix tool physics, log-pattern reading and short multi-step numericals.

What You’ll Learn

By the end of this chapter you will be able to:

  • Describe the invasion profile and choose tools for open-hole, cased-hole and production logging, and for logging while drilling
  • Explain laterolog and induction responses, read invasion from shallow and deep curves, and correct for temperature
  • Derive \( R_w \) from the SP, explain its polarity and its reduction by shale
  • Use temperature logs: gradients, Horner extrapolation, cement tops and fluid entries
  • Compute porosity from sonic, density and neutron logs, detect gas and shale on a neutron–density overlay, and estimate shale volume from gamma ray
  • Apply the formation factor and Archie’s equation, use \( R_{wa} \), Pickett plots and moveable-hydrocarbon checks
  • Estimate permeability from logs and identify lithology from crossplots, Pe and M–N plots
  • Analyse spinner, holdup and pulsed-neutron data for production and saturation monitoring

Prerequisites


Learning Path

The topics follow the order of the official syllabus lines, with logging while drilling taken together with the other acquisition modes:

graph TD
    A["1. Logging Operations
open-hole, cased-hole,
production logging, LWD"] --> B["2. Electrical, SP and
Temperature Logs
Rt, Rxo, Rw, gradients"] A --> C["3. Porosity Logs
sonic, density, neutron,
gamma ray"] B --> D["4. Formation Evaluation
formation factor, Archie,
permeability, lithology"] C --> D D --> E["Quick Revision"]

Topics in This Chapter

#TopicWhat it coversTime
1Logging Operations: Open-Hole, Cased-Hole, Production Logging and LWDwireline acquisition, borehole environment and invasion zones, tool–mud compatibility, open-hole suite, image and NMR logs, cased-hole GR/CCL, cement bond and VDL, pulsed-neutron sigma and C/O, production-logging tools, spinner and holdup analysis, MWD and LWD, telemetry, propagation resistivity, geosteering35 min
2Electrical, SP and Temperature Logsconduction in rocks, Arps correction, normal and lateral devices, laterolog and induction (series vs parallel), micro-resistivity, invasion profiles, SP origin and equation, polarity, shale reduction, \( R_w \) from SP, geothermal gradient and conductivity, Horner plot, uses of temperature logs35 min
3Porosity Logs: Sonic, Density, Neutron and Gamma Raysonic principle, Wyllie and Raymer, secondary porosity, density and Pe, electron density, neutron and hydrogen index, matrix and gas effects, neutron–density overlay and crossover, gamma-ray physics, \( I_{GR} \) and Larionov, spectral GR, log shapes40 min
4Formation Evaluation: Formation Factor, Porosity, Permeability, Saturation and Lithologyinterpretation workflow, \( F = R_o/R_w = a/\phi^m \), Archie saturation, flushed zone and movability, ratio method, \( R_w \) and \( R_{wa} \), Pickett and Hingle plots, bulk volume water, shaly sands, log permeability (Timur, NMR, testers), crossplots, M–N and apparent-matrix plots, net pay40 min
—Quick Revisionevery formula, value and trap on one page10 min

Official Syllabus Lines and Where They Are Covered

Official topic lineCovered in
Open-hole, cased-hole, production loggingLogging Operations (all three modes, cement bond, pulsed neutron, spinner and holdup)
Electrical, SP, temperature logsElectrical, SP and Temperature Logs; temperature in production logging also in Logging Operations
Porosity logs: sonic, density, neutron; gammaPorosity Logs: Sonic, Density, Neutron and Gamma Ray
Formation factor, porosity, permeability, saturation, lithologyFormation Evaluation; porosity calculation from each tool in Porosity Logs
Logging while drillingLogging Operations (MWD vs LWD, telemetry, propagation resistivity, comparison with wireline, geosteering)

How CSIR NET Asks It

Per the NTA information bulletin for December 2026, Earth Sciences Part C has 80 questions, of which 25 are to be attempted, at 4 marks each with −1.32 for a wrong answer, a maximum of 100 marks (full table on the Earth Sciences overview). If more than 25 Part C questions are answered, only the first 25 answered are evaluated. The bulletin gives no count of questions per unit. From the syllabus wording, expect these kinds of question:

Question typeTypical contentWhere to practise
Tool physicswhat each tool measures; source and interaction (Cs-137 and Compton scattering, Am-Be and hydrogen); series vs parallel resistivity response; origin of the SPLevel 1 and 2 on each page
Tool selection and conditionsoil-based mud, air-filled hole, cased hole; laterolog or induction; sigma or C/OLogging Operations, Electrical logs
Log-pattern readinginvasion profiles; SP polarity; neutron–density crossover; CBL amplitude; GR shapes; temperature anomaliesLevel 2 and 3
One- and multi-step numericals\( R_w \) from SSP; Arps; Horner; porosity from \( \Delta t \), \( \rho_b \), gas zones; \( I_{GR} \) and \( V_{sh} \); \( F \), \( R_o \), \( S_w \), \( R_{wa} \), \( S_{xo} \); Pickett slope; zone contributions; holdup; sigma saturationLevel 3
Statement evaluationassumptions of Archie and Wyllie; what the sonic misses; LWD vs wireline; shaly-sand errorsLevel 3

Quick Reference

QuantityValue or formula
Archie\( S_w^n = aR_w/(\phi^m R_t) \); \( F = R_o/R_w = a/\phi^m \)
SP\( \text{SSP} = -K\log_{10}(R_{mf}/R_w) \), \( K \approx 65 + 0.24T(^\circ\text{C}) \)
Arps\( R_2 = R_1(T_1 + 21.5)/(T_2 + 21.5) \) (°C)
Sonic (Wyllie)\( \phi = (\Delta t - \Delta t_{ma})/(\Delta t_f - \Delta t_{ma}) \); 55.5, 47.5, 43.5, 189 µs/ft
Density\( \phi = (\rho_{ma} - \rho_b)/(\rho_{ma} - \rho_f) \); 2.65, 2.71, 2.87 g/cm³
Pesandstone 1.8, dolomite 3.1, limestone 5.1
Gas porosity\( \sqrt{(\phi_N^2 + \phi_D^2)/2} \)
GR index\( (GR - GR_{\min})/(GR_{\max} - GR_{\min}) \)
Sigma\( \Sigma = (1-\phi)\Sigma_{ma} + \phi S_w\Sigma_w + \phi(1-S_w)\Sigma_h \)
Spinner\( Q = C v_a A \), \( C \approx 0.83 \) turbulent
Holdup\( y_w = (\rho_m - \rho_o)/(\rho_w - \rho_o) \)

Related chapters: Petroleum Geology and Indian Basins · Signal Processing · Hydrogeology


Start Learning

Begin with the first topic:

→ Logging Operations: Open-Hole, Cased-Hole, Production Logging and LWD

Advertisement
Advertisement