Skip to content

Graphs of Functions and Scientific Plots

CSIR NET Part A graphical analysis: slope and area, motion and rate graphs, curve shapes, shifts, semi-log and log-log plots, and solving equations by graph.

  • 20 min read
  • Updated
On this page · 15 sections
  1. Prerequisites
  2. The Hook: The Growth Curve That Became a Straight Line
  3. What a Graph Can Tell You
  4. Motion Graphs
  5. Rate Graphs and Accumulation
  6. A Catalogue of Curve Shapes
  7. Logarithmic Scales
  8. Solving Equations with Graphs
  9. Memory Tricks
  10. Don’t Confuse
  11. Common Mistakes
  12. Practice
  13. Quick Revision Table
  14. Key Takeaways
  15. What’s Next

Prerequisites

The Hook: The Growth Curve That Became a Straight Line

What a Graph Can Tell You

FeatureHow to read itMeaning
InterceptWhere the curve meets an axisStarting value (y-intercept) or the input that gives zero (x-intercept)
SlopeRise ÷ run between two pointsRate of change of y with x
Area under the curveArea between the curve and the x-axisAccumulated total of y over the x-interval
Maximum / minimumHighest or lowest pointPeak or trough; slope is zero there for a smooth curve
AsymptoteA line the curve approaches but does not reachLimiting value, such as saturation or zero
InflectionWhere the curve changes from bending up to bending down, or the reverseRate of change is itself at a maximum or minimum

The two that do most of the work are slope and area.

$$\boxed{\text{slope} = \frac{\Delta y}{\Delta x}} \qquad \boxed{\text{area under a graph of } y \text{ against } x = \text{total of } y\,\Delta x}$$

The units tell you what each one means. If y is in m/s and x in s, the slope is in m/s² (acceleration) and the area is in m (distance).

Slope and area for common scientific plots

GraphSlope givesArea gives
Distance (or position) vs timeSpeed (velocity)Nothing useful
Velocity vs timeAccelerationDisplacement
Acceleration vs timeRate of change of accelerationChange in velocity
Flow rate (L/min) vs timeHow fast the flow rate changesVolume delivered
Concentration vs timeRate of reaction (sign tells direction)Exposure (for example, area under a drug-concentration curve)
Cumulative total vs timeRate at that timeNothing useful
Force vs extensionStiffness (spring constant)Work done

Motion Graphs

Distance–time and position–time

On a distance–time graph, a straight segment means constant speed, equal to its slope. A horizontal segment means the object is at rest. A curve bending upward means speeding up.

If two objects’ position–time lines cross, they are at the same place at that time: that is where one overtakes or meets the other.

Velocity–time

On a velocity–time graph, the slope is acceleration and the area under the graph is displacement. For straight-line segments the area splits into triangles, rectangles and trapeziums.

The example below is invented: a vehicle speeds up uniformly from rest to 20 m/s in 10 s, runs at 20 m/s for 20 s, and brakes uniformly to rest in 5 s.

xychart-beta
    title "Velocity-time graph (points every 5 s)"
    x-axis "Time (s)" ["0", "5", "10", "15", "20", "25", "30", "35"]
    y-axis "Velocity (m/s)" 0 --> 25
    line [0, 10, 20, 20, 20, 20, 20, 0]

For uniformly changing velocity from \( u \) to \( v \) over time \( t \), the area is a trapezium:

$$\boxed{\text{distance} = \frac{u + v}{2}\times t}$$

The Physical Sciences syllabus covers mechanics in full; Part A needs only these areas and slopes.

Rate Graphs and Accumulation

The same idea works for any rate. If a graph shows how fast something is added, its area is how much was added.

A Catalogue of Curve Shapes

Recognising a curve’s equation from its shape is a common item. Learn these shapes and their tell-tale features.

FunctionShapeFeatures to check
\( y = mx + c \)Straight lineSlope \( m \), y-intercept \( c \)
\( y = ax^2 \)ParabolaSymmetric about the y-axis; opens up if \( a > 0 \)
\( y = x^3 \)S-shaped through the originOdd: rotating 180° about the origin leaves it unchanged
\( y = \lvert x \rvert \)VSharp corner at the origin
\( y = \frac{1}{x} \)Rectangular hyperbolaTwo branches; approaches both axes, touches neither
\( y = \sqrt{x} \)Rising, flatteningDefined for \( x \ge 0 \) only; starts at the origin
\( y = e^{x} \)Exponential growthy-intercept 1; always positive; flat to the left, steep to the right
\( y = e^{-x} \)Exponential decayy-intercept 1; approaches 0 for large x
\( y = \ln x \)Slow riseDefined for \( x > 0 \); passes through (1, 0); falls without limit as \( x \to 0^+ \)
\( y = \frac{ax}{b + x} \)Rectangular hyperbola through the origin, saturatingApproaches \( a \); reaches \( \frac{a}{2} \) at \( x = b \)
Logistic \( y = \frac{K}{1 + e^{-r(x - x_0)}} \)Sigmoid (S-curve)Plateau at \( K \); steepest at the midpoint, where \( y = \frac{K}{2} \)
\( y = \sin x \)Periodic wavePeriod \( 2\pi \); between −1 and 1

Identifying a curve: a checklist

When asked “which graph could represent \( y = f(x) \)?”, test the options in this order. Each check usually eliminates one or two.

  1. Value at x = 0 (the y-intercept).
  2. Sign of y for positive and negative x.
  3. Symmetry: even (\( f(-x) = f(x) \), mirror in the y-axis) or odd (\( f(-x) = -f(x) \), symmetric through the origin).
  4. Behaviour for large x: grows without limit, levels off, or goes to zero.
  5. Turning points: where the curve has a maximum or minimum.

Shifting and stretching a graph

If you know the graph of \( y = f(x) \), these rules give related graphs without recomputing.

New functionEffect on the graph
\( f(x) + k \)Shift up by \( k \)
\( f(x - h) \)Shift right by \( h \) (note the minus sign)
\( f(x + h) \)Shift left by \( h \)
\( -f(x) \)Reflect in the x-axis
\( f(-x) \)Reflect in the y-axis
\( a\,f(x) \), \( a > 1 \)Stretch vertically by \( a \)
\( f(ax) \), \( a > 1 \)Squeeze horizontally by \( a \)

So if \( f \) has a peak at \( (1, 3) \), then \( f(x - 2) + 1 \) has its peak at \( (3, 4) \), and \( -f(x) \) has a trough at \( (1, -3) \).

Logarithmic Scales

A logarithmic axis places 1, 10, 100, 1,000 at equal spacing. Each equal step is a multiplication, not an addition.

PlotAxesA straight line meansSlope means
Lineary vs x\( y = mx + c \)Absolute change per unit x
Semi-log\( \log y \) vs x\( y = A\,b^{x} \) (exponential)\( \log b \): the fixed factor per unit x
Log-log\( \log y \) vs \( \log x \)\( y = A\,x^{n} \) (power law)The exponent \( n \)

Semi-log plots and doubling time

Here are the hook’s counts on a linear axis and as \( \log_{10} N \).

xychart-beta
    title "Cell count on a linear axis"
    x-axis "Time (min)" ["0", "40", "80", "120", "160", "200"]
    y-axis "Cells (thousands)" 0 --> 1100
    line [1, 4, 16, 64, 256, 1024]
xychart-beta
    title "Same data as log10 of cell count"
    x-axis "Time (min)" ["0", "40", "80", "120", "160", "200"]
    y-axis "log10 N" 2 --> 7
    line [3.0, 3.6, 4.2, 4.81, 5.41, 6.01]

On the semi-log plot, \( \log_{10} N \) rises by about 3 (from 3.0 to 6.0) in 200 minutes, so N grew about 1,000-fold. Since \( 2^{10} = 1024 \approx 1000 \), that is about 10 doublings in 200 minutes:

$$\boxed{\text{doubling time} = \frac{\Delta t \times 0.301}{\Delta \log_{10} N}} \qquad \frac{200 \times 0.301}{3.0} \approx 20 \text{ min}$$

Log-log plots and power laws

If \( y = A x^{n} \), then \( \log y = \log A + n \log x \): a straight line with slope \( n \).

Log-log slopeRelationExample
1\( y \propto x \)Mass of a uniform rod vs its length
2\( y \propto x^2 \)Area of a square vs its side
3\( y \propto x^3 \)Volume of a cube vs its side
−1\( y \propto \frac{1}{x} \)Pressure vs volume at fixed temperature (Boyle’s law)
−2\( y \propto \frac{1}{x^2} \)Intensity vs distance from a point source

Solving Equations with Graphs

The number of real solutions of \( f(x) = g(x) \) is the number of points where the graphs of \( y = f(x) \) and \( y = g(x) \) cross. Sketch both; count crossings; check doubtful regions with a few values.

Memory Tricks

Don’t Confuse

ThisvsThat
Slope of a distance–time graph (speed)slope of a velocity–time graph (acceleration)
Area under a v–t graph (displacement)area under a d–t graph (no physical meaning)
Highest point of a rate graphhighest value of the accumulated quantity
Straight line on semi-log axes (exponential)straight line on log-log axes (power law)
\( f(x - h) \) shifts right\( f(x) - h \) shifts down
\( e^{-x} \) (decay, starts at 1)\( \frac{1}{x} \) (undefined at 0, two branches)

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. What does the slope of a distance–time graph represent?
  2. What does the area under a velocity–time graph represent?
  3. Data plotted as \( \log y \) against x fall on a straight line. What kind of relation is it?
Answers
  1. Speed.
  2. Displacement (distance travelled, if the velocity does not change sign).
  3. Exponential: \( y = A b^{x} \).

Level 2: Part A Style

Practice Q1. A velocity–time graph is a straight line from 4 m/s at \( t = 0 \) to 12 m/s at \( t = 4 \) s. The distance covered in these 4 s is:

(a) 16 m (b) 24 m (c) 32 m (d) 48 m

Answer: (c) 32 m

Area of the trapezium: \( \frac{4 + 12}{2}\times 4 = 32 \) m.

Option (a) is the triangle above 4 m/s only (\( \frac{1}{2}\times 4 \times 8 \)); option (d) uses the final speed for the whole time.

Practice Q2. A curve passes through the origin, rises for all positive x, bends downward, and approaches the horizontal line \( y = 5 \) for large x without reaching it. Which equation fits?

(a) \( y = 5x \) (b) \( y = \frac{5x}{2 + x} \) (c) \( y = 5e^{x} \) (d) \( y = 5 - x^2 \)

Answer: (b)

Check each feature:

  • (a) is a straight line with no limit.
  • (b) is 0 at \( x = 0 \), increases, and approaches 5 as x grows (it is 2.5 at \( x = 2 \)). Fits.
  • (c) is 5 at the origin and grows without limit.
  • (d) is 5 at the origin and falls.

Practice Q3. The graph of \( y = f(x) \) has its only maximum at \( (1, 3) \). Where is the maximum of \( y = f(x - 2) + 1 \)?

(a) \( (-1, 4) \) (b) \( (3, 4) \) (c) \( (3, 2) \) (d) \( (1, 6) \)

Answer: (b) (3, 4)

\( f(x - 2) \) shifts the graph 2 to the right, moving the peak to \( x = 3 \); adding 1 lifts it to \( y = 4 \).

Option (a) shifts the wrong way.

Practice Q4. On a log-log plot, a straight line passes through \( (10, 1000) \) and \( (100, 10^5) \). The value of y at \( x = 30 \) is:

(a) 3,000 (b) 9,000 (c) 27,000 (d) 30,000

Answer: (b) 9,000

Slope \( = \frac{5 - 3}{2 - 1} = 2 \), so \( y = A x^2 \). From \( (10, 1000) \): \( A = 10 \). At \( x = 30 \): \( 10 \times 900 = 9000 \).

Option (a) assumes a slope of 1; option (c) a slope of 3.

Level 3: Multi-Step (Part C depth)

Practice Q5. On a position–time graph, runner A’s line is \( d = 5t \) (d in metres, t in seconds), starting at \( t = 0 \). Runner B starts from the same point at \( t = 2 \) s, and B’s line is \( d = 7(t - 2) \). Consider the statements:

  1. B is faster than A.
  2. The two lines cross at \( t = 7 \) s.
  3. They meet 35 m from the start.
  4. At \( t = 5 \) s, A is ahead of B by 4 m.

Which statements are correct?

(a) 1 and 2 only (b) 1, 2 and 3 only (c) 2, 3 and 4 only (d) 1, 2, 3 and 4

Answer: (d) 1, 2, 3 and 4
  • Slopes: A 5 m/s, B 7 m/s. B is faster: 1 true.
  • Crossing: \( 5t = 7t - 14 \Rightarrow t = 7 \) s: 2 true.
  • Position then: \( 5 \times 7 = 35 \) m: 3 true.
  • At \( t = 5 \): A is at 25 m, B at \( 7 \times 3 = 21 \) m. A leads by 4 m: 4 true.

Practice Q6. How many real values of x satisfy \( x^2 = 2^x \)?

(a) 1 (b) 2 (c) 3 (d) 4

Answer: (c) 3

\( x = 2 \) and \( x = 4 \) are exact solutions. Between \( x = -1 \) (where \( x^2 = 1 > 2^{-1} = 0.5 \)) and \( x = 0 \) (where \( x^2 = 0 < 2^0 = 1 \)) the curves cross once more, near \( x \approx -0.77 \).

Beyond \( x = 4 \), \( 2^x \) stays ahead (at 5: 32 against 25, and the gap widens). For \( x < -1 \), \( x^2 > 1 \) while \( 2^x < 0.5 \), so there are no more crossings. Total: 3. Option (b) is the integer-only answer.

Practice Q7. Water flows into an empty tank. The inflow rate rises steadily from 0 to 6 L/min over the first 10 min, stays at 6 L/min for the next 5 min, and then falls steadily to 0 over the following 5 min. No water leaves the tank. Consider the statements:

  1. The total volume that flows in during the 20 minutes is 75 L.
  2. The volume in the tank is greatest at \( t = 15 \) min.
  3. Half of the total volume has flowed in by \( t = 11.25 \) min.
  4. The average inflow rate over the 20 minutes is 3.75 L/min.

Which statements are correct?

(a) 1 and 2 only (b) 1, 3 and 4 only (c) 1 and 4 only (d) 2, 3 and 4 only

Answer: (b) 1, 3 and 4 only

The rate graph is a trapezium. Split it:

  • 0–10 min (triangle): \( \frac{1}{2}\times 10 \times 6 = 30 \) L.
  • 10–15 min (rectangle): \( 5 \times 6 = 30 \) L.
  • 15–20 min (triangle): \( \frac{1}{2}\times 5 \times 6 = 15 \) L.

Total 75 L: 1 true.

The rate is still positive after 15 min, so the tank keeps filling until 20 min. 2 is false: 15 min is when the rate starts to fall, not when the volume peaks.

Half of 75 L is 37.5 L. By 10 min there are 30 L; at 6 L/min the remaining 7.5 L takes 1.25 min, so 11.25 min: 3 true.

Average rate \( = \frac{75}{20} = 3.75 \) L/min: 4 true.

Quick Revision Table

IdeaRule
Slope\( \frac{\Delta y}{\Delta x} \): rate; units y per x
AreaTotal accumulated; units y × x
d–t graphSlope = speed; crossing = meeting
v–t graphSlope = acceleration; area = displacement
Uniform change u → v in tDistance \( = \frac{u + v}{2}t \)
Rate graphArea = amount; amount peaks where rate reaches zero
\( \frac{ax}{b + x} \)Saturates at \( a \); half of \( a \) at \( x = b \)
Shifts\( f(x - h) \) right; \( f(x) + k \) up; \( -f(x) \) flip
Semi-log straightExponential; 0.301 per doubling on \( \log_{10} \)
Log-log straightPower law; slope = exponent
Solutions of \( f = g \)Count crossings; check sign changes between integers

Key Takeaways

What’s Next