Skip to content

Microbial Growth Kinetics, Bioreactors and Fermentation

Monod kinetics, batch, fed-batch and chemostat equations, bioreactors, sterilization, oxygen transfer and industrial fermentation products.

  • 21 min read
  • Updated
On this page · 16 sections
  1. Prerequisites
  2. The Hook: The Culture That Never Grows Old
  3. Batch Growth
  4. Continuous Culture (the Chemostat)
  5. Fed-Batch Culture
  6. Bioreactors
  7. Media and Sterilization
  8. Oxygen Transfer in Practice
  9. Fermentation Products
  10. Memory Tricks
  11. Don’t Confuse
  12. Common Mistakes
  13. Practice
  14. Quick Revision Table
  15. Key Takeaways
  16. What’s Next

Prerequisites

The Hook: The Culture That Never Grows Old

How CSIR NET asks it. Part B: which phase has maximum specific growth rate, what washout means, the definition of \( D_{crit} \), primary versus secondary metabolite, which reactor suits a shear-sensitive culture. Part C: solve a chemostat for \( S \), \( X \) and productivity; find the optimum dilution rate; compute a sterilization hold time from a Del factor; convert an oxygen demand into a required \( k_La \).


Batch Growth

graph LR
    L["Lag
adaptation, enzyme induction
mu = 0"] --> E["Exponential (log)
mu = mu_max
balanced growth"] E --> D["Deceleration
substrate depleting"] D --> S["Stationary
growth = death
secondary metabolites"] S --> DP["Death
first-order decline"]
  • Lag phase: no increase in number; cells induce the enzymes they need. Shortened by a large, young, physiologically matched inoculum in the same medium — which is why seed trains exist.
  • Exponential phase: \( \mathrm{d}X/\mathrm{d}t = \mu X \), so \( \ln X \) against \( t \) is a straight line of slope \( \mu \). This is balanced growth — all components increase in the same proportion.
  • Stationary phase: a nutrient is exhausted or a product is inhibitory; net rate zero. Most secondary metabolites (antibiotics) appear here (idiophase) rather than in the growth phase (trophophase).
  • Death phase: often first order, \( \mathrm{d}X/\mathrm{d}t = -k_dX \).

Monod equation. The empirical link between growth rate and the limiting substrate:

$$\boxed{\mu = \frac{\mu_{max}S}{K_s + S}}$$

\( K_s \) is the substrate concentration at half of \( \mu_{max} \) — typically very small (milligrams per litre for sugars), which is why a batch culture stays effectively at \( \mu_{max} \) until the substrate almost runs out and then stops abruptly. The form is identical to Michaelis–Menten but the constants are not enzyme constants: \( K_s \) is a whole-organism property.

Other kinetic forms worth recognising: Contois (\( \mu \) depends on \( S/X \), for dense cultures), Moser, Tessier, Haldane/Andrews for substrate inhibition (\( \mu = \mu_{max}S/(K_s + S + S^2/K_I) \), which has a maximum at intermediate \( S \)), and product-inhibition forms used for ethanol.

Maintenance and the observed yield

Cells spend substrate on turnover, motility and gradients even when not growing:

$$-\frac{1}{X}\frac{\mathrm{d}S}{\mathrm{d}t} = q_S = \frac{\mu}{Y_{X/S}^{true}} + m_S \qquad\Rightarrow\qquad \frac{1}{Y^{obs}_{X/S}} = \frac{1}{Y^{true}_{X/S}} + \frac{m_S}{\mu}$$

A Pirt plot of \( 1/Y^{obs} \) against \( 1/\mu \) gives \( m_S \) as the slope and the true yield as the intercept. The practical lesson: slow growth wastes substrate on maintenance, so running a chemostat at very low \( D \) to get “efficient” conversion backfires.

Product formation kinetics (Luedeking–Piret)

$$q_P = \alpha\mu + \beta$$
TypeParametersExample
Growth-associated (primary)\( \alpha \neq 0,\ \beta = 0 \)Ethanol, lactic acid, most primary metabolites
Non-growth-associated (secondary)\( \alpha = 0,\ \beta \neq 0 \)Penicillin, many antibiotics
Mixedboth non-zeroCitric acid, many amino acids

Continuous Culture (the Chemostat)

For a well-mixed vessel with sterile feed, at steady state:

QuantityEquation
Dilution rate\( D = F/V \) (h⁻¹); mean residence time \( = 1/D \)
Biomass balance\( \mathrm{d}X/\mathrm{d}t = \mu X - DX = 0 \Rightarrow \mu = D \)
Residual substrate\( S = \dfrac{K_sD}{\mu_{max}-D} \) — independent of \( S_0 \)
Steady-state biomass\( X = Y_{X/S}(S_0 - S) \)
Productivity\( DX \) (g L⁻¹ h⁻¹)
Washout\( D_{crit} = \dfrac{\mu_{max}S_0}{K_s + S_0} \approx \mu_{max} \) when \( S_0 \gg K_s \)
Maximum productivity\( D_{opt} = \mu_{max}\left(1 - \sqrt{\dfrac{K_s}{K_s + S_0}}\right) \)

Variants.

SystemControl principleNote
ChemostatGrowth limited by one nutrient; \( D \) fixedThe standard; any nutrient can be the limiter (C, N, P, Mg)
TurbidostatBiomass held constant by a turbidity sensor adjusting \( F \)Runs near \( \mu_{max} \), where a chemostat is unstable; ideal for selecting fast growers
Auxostat / pH-statA measured variable (pH, DO) controls feedUseful when a product acidifies the broth
Cell recycleFilter or settler returns cellsDecouples \( D \) from \( \mu \); allows \( D > \mu_{max} \); used in wastewater treatment
PerfusionMedium exchanged, cells retainedStandard for mammalian cells making monoclonal antibodies

Why continuous culture is rare industrially despite its elegance: contamination and strain instability over long runs, loss of the plasmid or the production phenotype (selection favours non-producers), validation and changeover difficulty for regulated products, and the fact that many antibiotics are made in stationary phase, which a chemostat by definition never reaches.


Fed-Batch Culture

Feed substrate without withdrawing broth: volume increases, and the feed rate controls growth. This is the dominant industrial mode (baker’s yeast, penicillin, recombinant proteins in E. coli and Pichia).

Why it wins:

  • Keeps the substrate low, avoiding substrate inhibition and overflow metabolism — the Crabtree effect in yeast (ethanol from excess glucose) and acetate formation in E. coli.
  • Lets oxygen demand be matched to the vessel’s maximum \( k_La \) instead of overwhelming it.
  • Relieves catabolite repression, essential for antibiotic production.
  • Reaches very high cell densities.

Quasi-steady state. If the feed is consumed as fast as it arrives, \( S \) stays almost constant and \( \mu \) falls as biomass accumulates. The feed rate for a chosen \( \mu \):

$$F = \frac{\mu X V}{Y_{X/S}(S_0^{feed} - S)} \approx \frac{\mu X V}{Y_{X/S}S_0^{feed}}$$

An exponential feed \( F = F_0e^{\mu t} \) holds \( \mu \) constant; a constant feed makes \( \mu \) decline hyperbolically as \( X \) and \( V \) grow.


Bioreactors

TypePrincipleBest forLimits
Stirred-tank (STR)Impellers (Rushton turbines for gas dispersion, pitched-blade or marine for flow), baffles to stop vortexingThe default; good \( k_La \) and mixing; well understoodHigh shear; high power draw
Bubble columnGas sparging only, no impellerLow shear, cheap, simplePoorer mixing; coalescence in viscous broth
AirliftRiser and downcomer give directed circulationShear-sensitive cells, single-cell protein, large volumesLower \( k_La \) in viscous broth
Packed bedImmobilised biocatalyst on a fixed supportImmobilised enzymes and cells, plug-flow behaviourChannelling, clogging, poor gas handling, heat removal
Fluidised bedParticles suspended by upflowImmobilised cells with gas evolutionNeeds careful particle density
Membrane / hollow-fibreCells retained against a membranePerfusion of animal cellsFouling
PhotobioreactorLight as the limiting “substrate”Algae and cyanobacteriaLight attenuation with depth
Solid-state fermenter (tray, rotating drum)Growth on moist solids with no free waterFungal enzymes, koji, compostingHeat removal and sensing are hard
Wave / single-use bagsRocking induces mixingSeed trains, clinical-scale mammalian cultureScale limits, plastic extractables

Measurement and control. Online: temperature, pH, dissolved oxygen (polarographic or optical), agitation and gas flow, pressure, foam, off-gas O₂/CO₂ by paramagnetic analyser and mass spectrometry, weight. Offline or at-line: biomass, substrate, product, viability. Foam control by mechanical breakers and antifoam — but antifoam lowers \( k_La \) by changing bubble coalescence, a real trade-off.

Modes of ideal flow. A stirred tank approximates a CSTR (complete back-mixing, exit composition = vessel composition); a packed bed approximates a PFR (plug flow, composition changes along the length). For reactions of positive order, a PFR gives a higher conversion per unit volume than a CSTR; for substrate-inhibited kinetics the back-mixing of a CSTR is an advantage because it keeps the inlet substrate diluted.


Media and Sterilization

Media. Defined (synthetic, reproducible, easy analysis) against complex (molasses, corn steep liquor, soybean meal, whey — cheap, rich, variable, harder downstream). An industrial medium must supply C, N, P, S, minerals, trace metals and growth factors, and is designed around cost per kilogram of product, not elegance. Precursors can be fed (phenylacetic acid for penicillin G); inducers (IPTG or lactose for lac-based expression) are added at a chosen point.

Sterilization kinetics. Thermal death of spores is first order:

$$\frac{\mathrm{d}N}{\mathrm{d}t} = -k_dN \qquad\Rightarrow\qquad \nabla = \ln\frac{N_0}{N} = k_d t$$

\( \nabla \) is the Del factor (design criterion). \( k_d \) follows Arrhenius with a very large activation energy for spore death, which is the key to the whole design: raising the temperature accelerates sterilisation far more than it accelerates nutrient destruction, so high-temperature short-time (HTST) continuous sterilisation destroys spores while preserving vitamins and sugars better than a long batch hold.

A design target of \( N = 10^{-3} \) (one failed batch in a thousand) is conventional. In batch sterilisation the heating and cooling ramps themselves kill spores, so the hold time is shorter than the total Del factor suggests. Continuous sterilisers use a steam injector, a holding coil (residence time = length/velocity) and a flash cooler.

Other sterilisation routes: filtration through 0.2 µm membranes for air and heat-labile media components (depth filters and HEPA for process air), radiation and ethylene oxide for single-use plastics, chemical sanitisation of surfaces, and CIP/SIP (clean-in-place, steam-in-place) for a plant that must be turned round between batches.


Oxygen Transfer in Practice

The supply side is \( \mathrm{OTR} = k_La(C^*-C_L) \); the demand side is \( \mathrm{OUR} = q_{O_2}X \). Everything industrial follows from forcing them to be equal.

What raises \( k_La \):

LeverEffectCost
Power per volume \( P/V \)\( k_La \propto (P/V)^{a}(v_s)^{b} \), \( a \) commonly 0.4–0.7Power, heat, shear
Superficial gas velocity \( v_s \)More bubbles, more areaFoaming, stripping of CO₂, flooding of the impeller
Oxygen enrichment / back-pressureRaises \( C^* \) through Henry’s lawGas cost, safety
Smaller bubbles (sparger design)Raises \( a \)Coalescence in real broth
Lower viscosityRaises \( k_L \)Set by the organism
AntifoamLowers \( k_La \)Unavoidable trade-off

Impeller flooding sets the ceiling: if gas is sparged faster than the impeller can disperse it, gas rises in a column around the shaft and \( k_La \) collapses. Critical DO is the dissolved-oxygen level below which \( q_{O_2} \) becomes oxygen-dependent; it is typically a small percentage of air saturation, so a culture can be oxygen-sufficient at surprisingly low DO — but the margin disappears instantly at high cell density.


Fermentation Products

ClassExamplesOrganism / note
BiomassBaker’s yeast; single-cell proteinFed-batch to avoid the Crabtree effect
Primary metabolitesEthanol, lactic acid, acetic acid, citric acid, amino acids (glutamate, lysine), vitamins (B₁₂, riboflavin)Growth-associated; classic strain programmes used auxotrophs and feedback-resistant mutants
Secondary metabolitesPenicillins, cephalosporins, tetracyclines, erythromycin; statins; immunosuppressantsIdiophase; often from actinomycetes and fungi; precursor feeding
EnzymesAmylases, proteases, cellulases, lipases, pectinases, glucose isomeraseDetergents, starch processing, textiles, feed
Recombinant proteinsInsulin, growth hormone, interferons, vaccines, monoclonal antibodiesE. coli, yeasts, CHO cells; glycosylation decides the host
Polymers and polysaccharidesXanthan, dextran, PHB/PHA, bacterial celluloseHighly viscous, non-Newtonian broths
Organic acids and solventsCitric acid (Aspergillus niger), ABE fermentation (Clostridium)Citric acid needs specific trace-metal limitation
Whole-cell transformationsSteroid hydroxylations, acrylamide from acrylonitrileRegio- and stereoselectivity no chemistry matches

Strain improvement runs from classical mutagenesis and screening, through protoplast fusion, to recombinant DNA and modern metabolic engineering (see the metabolic engineering page). Industrial penicillin titres rose by orders of magnitude over decades, almost entirely through iterated mutation and selection before genetics could be targeted.

Process economics in one table

DriverWhat it means
Titre, rate, yield (“TRY”)g L⁻¹, g L⁻¹ h⁻¹, g product per g substrate — the three numbers every project tracks
Capital (CAPEX)Fermenters, utilities, containment, downstream train; scales roughly with volume to a fractional power
Operating (OPEX)Raw materials dominate for commodity products; labour and QC dominate for biopharmaceuticals
Downstream shareOften 50–80% of total cost for a high-purity product — titre improvements pay twice, by also shrinking the purification
Low-value, high-volumeEthanol, citric acid, enzymes: cost-driven, cheap media, continuous or large fed-batch
High-value, low-volumeTherapeutic proteins: regulation-driven, single-use equipment, validation costs

Memory Tricks

Don’t Confuse

ThisvsThat
\( K_s \) (Monod, whole organism, g L⁻¹)vs\( K_m \) (one enzyme)
Chemostat (\( D \) fixed, \( X \) follows)vsTurbidostat (\( X \) fixed, \( D \) follows)
Fed-batch (volume rises, nothing out)vsContinuous (in = out, volume constant)
\( D_{crit} \) (washout)vs\( D_{opt} \) (maximum \( DX \), always lower)
Primary metabolite (trophophase)vsSecondary metabolite (idiophase)
OTR (supply, \( k_La(C^*-C_L) \))vsOUR (demand, \( q_{O_2}X \))
Del factor \( \nabla \) (dimensionless)vs\( k_d \) (min⁻¹)
Batch sterilisation (long hold, more nutrient damage)vsHTST continuous (short, hotter, gentler on medium)
CSTR (back-mixed)vsPFR (plug flow, gradient along length)
True yieldvsObserved yield (lower at low \( \mu \) because of maintenance)

Common Mistakes


Practice

All questions below are original practice questions written in CSIR NET style. They are not previous-year questions.

Level 1: Foundation

  1. In a steady-state chemostat, what is the relation between specific growth rate and dilution rate?
  2. State the Luedeking–Piret equation and say which term describes penicillin.
  3. Define the Del factor.
Answers
  1. \( \mu = D \).
  2. \( q_P = \alpha\mu + \beta \); penicillin is essentially non-growth-associated, described by the \( \beta \) term.
  3. \( \nabla = \ln(N_0/N) = k_dt \), the design criterion for thermal sterilisation.

Level 2: Part B Style

Q1 (practice). A chemostat runs with \( \mu_{max} = 0.5\ \mathrm{h^{-1}} \), \( K_s = 1.0 \) g L⁻¹, \( S_0 = 20 \) g L⁻¹, \( Y_{X/S} = 0.4 \) g/g and \( D = 0.25\ \mathrm{h^{-1}} \). The steady-state biomass concentration is:

  • (a) 8.0 g L⁻¹
  • (b) 7.6 g L⁻¹
  • (c) 4.0 g L⁻¹
  • (d) 19.0 g L⁻¹
Answer and explanation

(b). \( S = K_sD/(\mu_{max}-D) = (1.0)(0.25)/(0.5-0.25) = 1.0 \) g L⁻¹. Then \( X = Y(S_0-S) = 0.4(20-1.0) = \mathbf{7.6\ g\ L^{-1}} \). Option (a) is the trap of ignoring the residual substrate.

Q2 (practice). Which reactor is most appropriate for a highly shear-sensitive culture that must nevertheless be aerated at large scale?

  • (a) Rushton-turbine stirred tank at high rpm
  • (b) Airlift reactor
  • (c) Packed bed
  • (d) Rotating-drum solid-state fermenter
Answer and explanation

(b). An airlift reactor moves liquid by the density difference between gassed riser and ungassed downcomer: directed circulation and aeration with no impeller, so shear is low and scale is cheap. A packed bed cannot handle gas and heat well; a solid-state drum is for growth on moist solids without free water.

Q3 (practice). In fed-batch culture of E. coli on glucose, the feed is kept deliberately limiting mainly to:

  • (a) reduce the cost of glucose
  • (b) avoid acetate accumulation from overflow metabolism and keep the oxygen demand within the vessel’s \( k_La \)
  • (c) raise \( K_s \)
  • (d) force the culture into stationary phase
Answer and explanation

(b). Excess glucose drives overflow metabolism (acetate in E. coli, ethanol in Saccharomyces — the Crabtree effect), which inhibits growth and wastes carbon, and it drives an oxygen demand the vessel cannot meet. \( K_s \) is a constant of the organism, not something feeding changes.

Q4 (practice). A culture has a true yield of 0.50 g g⁻¹ and a maintenance coefficient of 0.04 g substrate per g biomass per hour. At \( \mu = 0.20\ \mathrm{h^{-1}} \), the observed yield is closest to:

  • (a) 0.50 g g⁻¹
  • (b) 0.48 g g⁻¹
  • (c) 0.45 g g⁻¹
  • (d) 0.40 g g⁻¹
Answer and explanation

(c). \( 1/Y^{obs} = 1/0.50 + 0.04/0.20 = 2.0 + 0.2 = 2.2 \), so \( Y^{obs} = 1/2.2 = \mathbf{0.455} \) g g⁻¹. The slower the growth, the larger the maintenance penalty.

Level 3: Part C Style

Q1 (practice). A chemostat is operated with \( \mu_{max} = 0.5\ \mathrm{h^{-1}} \), \( K_s = 1.0 \) g L⁻¹, \( S_0 = 20 \) g L⁻¹ and \( Y_{X/S} = 0.4 \) g g⁻¹.

(i) Calculate the washout dilution rate. (ii) Calculate the dilution rate for maximum biomass productivity and the productivity there. (iii) Compare that with the productivity at \( D = 0.25\ \mathrm{h^{-1}} \) and comment on which the plant should choose.

Answer and worked solution

(i) \( D_{crit} = \mu_{max}S_0/(K_s+S_0) = 0.5(20)/21 = \mathbf{0.476\ h^{-1}} \).

(ii) \( D_{opt} = \mu_{max}\left(1-\sqrt{K_s/(K_s+S_0)}\right) = 0.5\left(1-\sqrt{1/21}\right) = 0.5(1-0.2182) = \mathbf{0.391\ h^{-1}} \). At this \( D \): \( S = (1.0)(0.391)/(0.5-0.391) = 3.58 \) g L⁻¹; \( X = 0.4(20-3.58) = 6.57 \) g L⁻¹; productivity \( DX = 0.391 \times 6.57 = \mathbf{2.57\ g\ L^{-1}h^{-1}} \).

(iii) At \( D = 0.25 \): \( S = 1.0 \), \( X = 7.6 \), \( DX = \mathbf{1.90\ g\ L^{-1}h^{-1}} \) — 26% lower productivity but with about 2.6 g L⁻¹ less unconverted substrate (1.0 against 3.58 g L⁻¹) leaving the vessel and a comfortable margin from washout (0.25 against 0.476). A plant usually runs between the two: close enough to \( D_{opt} \) for throughput, far enough below \( D_{crit} \) that a pump upset or a drop in \( \mu_{max} \) (temperature, inhibitor) does not wash out the culture. Note also that substrate leaving unconverted is lost revenue and a load on effluent treatment.

Q2 (practice). A 10,000 L medium batch contains 10⁷ spores per litre. The design target is a probability of 10⁻³ that one spore survives. At 121 °C the specific death rate of the spores is 1.0 min⁻¹; at 131 °C the same spores are reported to die with \( k_d \) = 8.5 min⁻¹.

(i) Compute the Del factor. (ii) Compute the isothermal hold time at 121 °C and at 131 °C. (iii) Why does the shorter, hotter cycle damage the medium less, and what equipment makes it possible?

Answer and worked solution

(i) \( N_0 = 10^7 \times 10^4 = 10^{11} \) spores; target \( N = 10^{-3} \).

$$\nabla = \ln(10^{11}/10^{-3}) = \ln(10^{14}) = 14 \times 2.3026 = \mathbf{32.2}$$

(ii) At 121 °C: \( t = \nabla/k_d = 32.2/1.0 = \mathbf{32.2\ min} \). At 131 °C: \( t = 32.2/8.5 = \mathbf{3.8\ min} \).

(iii) Spore death has a much larger activation energy than the destruction of vitamins, amino acids and sugars, so a 10 K rise speeds killing (here about 8.5-fold) far more than it speeds nutrient loss. Cutting the exposure from 32 min to under 4 min therefore destroys the same number of spores with much less caramelisation and Maillard loss. Equipment: a continuous HTST steriliser — direct steam injection, a holding coil whose length and flow velocity set the residence time, then flash cooling. In batch sterilisation the heating and cooling ramps also contribute kill, so the isothermal hold can be shortened accordingly; ignoring that over-sterilises the medium.

Q3 (practice). A fed-batch E. coli culture is at 20 g L⁻¹ dry weight in 1,000 L and is to be held at \( \mu = 0.10\ \mathrm{h^{-1}} \) with a 500 g L⁻¹ glucose feed and \( Y_{X/S} = 0.50 \) g g⁻¹. The specific oxygen uptake is 0.15 g O₂ per g biomass per hour. Saturation DO is 7.0 mg L⁻¹ and the set point is 2.5 mg L⁻¹. Which of the following are correct?

(A) The required feed rate is about 8 L h⁻¹. (B) The oxygen uptake rate is 3.0 g L⁻¹ h⁻¹. (C) The required \( k_La \) is about 667 h⁻¹. (D) Switching the sparge gas to 40% oxygen would roughly halve the required \( k_La \).

  • (a) A and B only
  • (b) A, B and C
  • (c) A, B, C and D
  • (d) B and C only
Answer and worked solution

(c) all four.

  • (A): \( F = \mu XV/(Y S_{feed}) = (0.10)(20)(1{,}000)/((0.50)(500)) = 2{,}000/250 = \mathbf{8.0\ L\ h^{-1}} \). Correct.
  • (B): \( \mathrm{OUR} = q_{O_2}X = 0.15 \times 20 = \mathbf{3.0\ g\ L^{-1}h^{-1}} \). Correct.
  • (C): \( k_La = \mathrm{OUR}/(C^*-C_L) = 3{,}000\ \mathrm{mg\,L^{-1}h^{-1}}/(7.0-2.5) = 3{,}000/4.5 = \mathbf{667\ h^{-1}} \). Correct — and a warning sign: that is at the top of what a large stirred tank delivers, so this culture is close to its oxygen ceiling.
  • (D): \( C^* \propto p_{O_2} \); 40% against 21% is a factor of 1.9, so \( C^* \approx 13.3 \) mg L⁻¹ and \( k_La = 3{,}000/(13.3-2.5) = 278\ \mathrm{h^{-1}} \) — a fall of about 58%, i.e. roughly halved. Correct.

Together these are the standard fed-batch design loop: the feed sets \( \mu \), \( \mu \) and \( X \) set the oxygen demand, and the oxygen demand decides whether the vessel can take the batch any further.


Quick Revision Table

ItemFact
Monod\( \mu = \mu_{max}S/(K_s+S) \); \( K_s \) usually very small
Growth phasesLag, exponential (\( \mu_{max} \), balanced), stationary (idiophase), death
Maintenance\( 1/Y^{obs} = 1/Y^{true} + m_S/\mu \); Pirt plot
Luedeking–Piret\( q_P = \alpha\mu + \beta \) (growth- / non-growth-associated)
Chemostat\( \mu = D \); \( S = K_sD/(\mu_{max}-D) \); \( X = Y(S_0-S) \)
Washout\( D_{crit} = \mu_{max}S_0/(K_s+S_0) \)
Optimum\( D_{opt} = \mu_{max}(1-\sqrt{K_s/(K_s+S_0)}) \)
Turbidostat\( X \) fixed, \( D \) adjusts; runs near \( \mu_{max} \)
Cell recycleAllows \( D > \mu_{max} \)
Fed-batch\( F = \mu XV/(Y S_{feed}) \); exponential feed holds \( \mu \)
Overflow metabolismAcetate (E. coli), ethanol / Crabtree (yeast)
ReactorsSTR, bubble column, airlift (low shear), packed/fluidised bed, membrane, photobioreactor, solid-state
Sterilisation\( \nabla = \ln(N_0/N) = k_dt \); target \( N = 10^{-3} \); HTST gentler on medium
Air sterilisation0.2 µm membrane / depth filters
Oxygen\( \mathrm{OTR}=k_La(C^*-C_L) \) must equal \( q_{O_2}X \); antifoam lowers \( k_La \)
ProductsPrimary (ethanol, citric acid, amino acids) vs secondary (penicillin, erythromycin)
EconomicsTitre–rate–yield; downstream often 50–80% of cost

Key Takeaways

What’s Next

Advertisement
Advertisement