Biochemical Engineering and Industrial Biotechnology Short Notes
One-page CSIR NET revision: balances, Monod and chemostat equations, sterilization, oxygen transfer, Thiele modulus, downstream processing, scale-up.
- 9 min
On this page · 10 sections
The whole unit on one page. For explanations and worked problems go back to the chapter: Engineering Principles and Bioprocess Thermodynamics, Growth Kinetics and Bioreactors, Enzyme and Microbial Technology, Downstream Processing and Scale-Up, Plant Design and Metabolic Engineering.
Mathematics and Balances
| Fact | Detail |
|---|---|
| General balance | Accumulation = In − Out + Generation − Consumption |
| Exponential growth | \( X = X_0e^{\mu t} \); \( t_d = 0.693/\mu \) |
| Specific vs volumetric | \( \mu \) (h⁻¹) against \( r_X = \mu X \) (g L⁻¹ h⁻¹) |
| Well-mixed tank response | \( \mathrm{d}C/\mathrm{d}t = D(C_{in}-C) \); 95% of a step in \( 3/D \) |
| Euler method | \( y_{n+1} = y_n + hf(y_n) \), error \( O(h) \) |
| Stoichiometric matrix | Steady state: \( \mathbf{S}\mathbf{v} = \mathbf{0} \); flux lies in the null space |
| Yields | \( Y_{X/S} \) 0.4–0.5 g/g aerobic on glucose; \( Y_{X/O} \approx 1 \) g/g; \( RQ \) = CO₂/O₂ |
| Ethanol from glucose | 0.511 g/g (and 0.489 g/g CO₂) |
| Biomass formula | \( \mathrm{CH_{1.8}O_{0.5}N_{0.2}} \), 24.6 g per C-mol, \( \gamma = 4.2 \) |
| Degree of reduction | C +4, H +1, O −2, N −3; \( \gamma_Sn_S = \gamma_Xn_X + \gamma_Pn_P + 4n_{O_2} \) |
| Metabolic heat | about 460 kJ per mol O₂; anaerobic fermentation releases far less |
| Heat removal | \( Q = UA\Delta T_{lm} \); \( Q = \dot mc_p\Delta T \), \( c_p \) = 4.18 kJ kg⁻¹ K⁻¹ |
| Scale geometry | Heat and O₂ demand \( \propto L^3 \); jacket area \( \propto L^2 \) |
Transport and Thermodynamics
| Fact | Detail |
|---|---|
| Three laws | Newton \( \tau=-\mu\,\mathrm{d}u/\mathrm{d}y \); Fourier \( q=-k\,\mathrm{d}T/\mathrm{d}y \); Fick \( J=-D\,\mathrm{d}C/\mathrm{d}y \) |
| Groups | \( Re=\rho uL/\mu \); impeller \( Re_i=\rho ND_i^2/\mu \); \( Pr=\nu/\alpha \); \( Sc=\nu/D \); \( Sh=k_cL/D \); \( Nu=hL/k \) |
| Rheology | Mycelial and polysaccharide broths pseudoplastic, \( \tau=K\dot\gamma^n \), \( n<1 \) |
| Oxygen transfer | \( \mathrm{OTR}=k_La(C^*-C_L) \); liquid film controls; \( C^* \) about 7–8 mg L⁻¹ in air-saturated water |
| Demand | \( \mathrm{OUR} = q_{O_2}X \); at steady state OTR = OUR |
| \( C^* \) levers | Henry’s law: oxygen enrichment and back-pressure raise it; temperature and solutes lower it |
| Entropy production | \( \sigma = \sum J_iX_i \ge 0 \); individual terms may be negative (coupling) |
| Onsager | \( L_{ik}=L_{ki} \), near equilibrium only; minimum entropy production is a linear-regime result |
| Open system | Cells hold a steady state far from equilibrium and export entropy |
| Glycolytic oscillations | PFK-1 feedback (ADP/AMP/F2,6BP activate, ATP inhibits); NADH, ATP/ADP oscillate; period of the order of minutes; suspensions synchronise |
Growth Kinetics
| Fact | Detail |
|---|---|
| Phases | Lag, exponential (\( \mu_{max} \), balanced growth), stationary (idiophase), death |
| Monod | \( \mu = \mu_{max}S/(K_s+S) \); \( K_s \) is a whole-organism constant, usually very small |
| Substrate inhibition | Haldane: \( \mu=\mu_{max}S/(K_s+S+S^2/K_I) \), maximum at intermediate \( S \) |
| Maintenance | \( q_S = \mu/Y^{true} + m_S \); \( 1/Y^{obs} = 1/Y^{true} + m_S/\mu \) (Pirt plot) |
| Product kinetics | \( q_P = \alpha\mu + \beta \): \( \alpha \) growth-associated, \( \beta \) not |
| Primary vs secondary | Ethanol, lactic and citric acid, amino acids vs penicillin and most antibiotics |
Continuous and Fed-Batch Culture
| Fact | Detail |
|---|---|
| Chemostat | \( D=F/V \); \( \mu = D \) at steady state |
| Residual substrate | \( S = K_sD/(\mu_{max}-D) \) — independent of \( S_0 \) |
| Biomass | \( X = Y_{X/S}(S_0-S) \); productivity \( DX \) |
| Washout | \( D_{crit} = \mu_{max}S_0/(K_s+S_0) \) |
| Maximum productivity | \( D_{opt} = \mu_{max}\left(1-\sqrt{K_s/(K_s+S_0)}\right) \), always below \( D_{crit} \) |
| Turbidostat | \( X \) fixed by a sensor, \( D \) adjusts; runs near \( \mu_{max} \) |
| Cell recycle / perfusion | Retained cells allow \( D > \mu_{max} \); perfusion is standard for animal cells |
| Why continuous is rare | Contamination, strain instability, loss of the producing phenotype, validation; antibiotics need stationary phase |
| Fed-batch | Volume rises, nothing withdrawn; \( F = \mu XV/(Y_{X/S}S_{feed}) \); exponential feed holds \( \mu \) |
| Why fed-batch wins | Avoids overflow metabolism (acetate in E. coli, Crabtree ethanol in yeast), relieves catabolite repression, caps oxygen demand, gives high density |
Reactors, Media and Sterilization
| Fact | Detail |
|---|---|
| Reactor types | Stirred tank (default), bubble column and airlift (low shear), packed and fluidised bed (immobilised), membrane/hollow fibre, photobioreactor, solid-state, wave bag |
| Ideal flow | CSTR back-mixed (runs at exit concentration) vs PFR (gradient along length) |
| Media | Defined (reproducible) vs complex (molasses, corn steep liquor, whey — cheap, variable) |
| Thermal death | First order: \( \nabla = \ln(N_0/N) = k_dt \) (Del factor) |
| Design target | Commonly \( N = 10^{-3} \), i.e. one failure in a thousand batches |
| HTST | Spore death has a far larger activation energy than nutrient destruction → hotter and shorter is gentler on the medium |
| Air and labile media | 0.2 µm membrane filtration; depth and HEPA filters for process air |
| Plant hygiene | CIP and SIP; no dead legs; 316L sanitary fittings |
Enzyme and Microbial Technology
| Fact | Detail |
|---|---|
| Why enzymes | Chemo-, regio- and stereoselectivity under mild conditions |
| Whole cell vs isolated | Cofactor recycling and multi-step pathways vs cleaner product and no cell-envelope resistance |
| Industrial enzymes | Glucose isomerase (HFCS), penicillin acylase (6-APA), amylases, proteases, lipases, cellulases, glucose oxidase |
| Deactivation | \( E=E_0e^{-k_dt} \); \( t_{1/2}=0.693/k_d \); economics = half-life × turnover |
| Protein engineering | Rational (structure-led) vs directed evolution (diversity + genotype–phenotype link + screen) vs semi-rational |
| Diversity methods | Error-prone PCR (points), DNA shuffling (recombination), saturation mutagenesis, StEP |
| Display | Phage, ribosome, mRNA, in vitro compartmentalisation |
| Immobilisation | Adsorption (leaches), ionic, covalent (no leakage, activity lost), affinity; entrapment (alginate, carrageenan); crosslinking (CLEA/CLEC) |
| Kinetic consequences | \( K_m^{app} \) up from diffusion, down from favourable electrostatic partitioning; pH optimum shifts; apparent \( E_a \) falls; order moves towards first |
| External film | \( Da = V_{max}/(k_saS_b) \); \( Da\gg1 \) = transport control |
| Thiele modulus | \( \phi = R\sqrt{k/D_e} \); \( D_e = D\varepsilon/\tau \) |
| Effectiveness factor | \( \eta = (3/\phi^2)(\phi\coth\phi-1) \); \( \eta\approx3/\phi \) for large \( \phi \) |
| \( \eta \) table | \( \phi \) = 1 → 0.94; 1.5 → 0.88; 3 → 0.67; 6 → 0.42; 10 → 0.27 |
| Diagnostic | Rate changes with particle size or stirring ⇒ mass-transfer limited |
| PFR design | \( V_{max}\tau = K_m\ln(S_0/S)+(S_0-S) \) |
| CSTR design | \( V_{max}\tau = (S_0-S)(K_m+S)/S \); larger \( \tau \), but better under substrate inhibition |
| Biosensor | Glucose oxidase electrode; outer membrane made deliberately diffusion-limiting for linearity |
Downstream Processing
| Fact | Detail |
|---|---|
| Sequence | RIPP: Recovery, Isolation, Purification, Polishing |
| Economics | Often 50–80% of total cost; overall yield = product of step yields (0.85⁵ = 0.44) |
| Disruption | Homogeniser, bead mill (scale); lysozyme, osmotic shock, freeze–thaw (gentle); over-disruption micronises debris and releases DNA |
| Homogeniser | \( \ln[R_m/(R_m-R)] = kNP^a \) |
| Stokes | \( v_g = d^2(\rho_p-\rho_L)g/18\mu \); centrifuge capacity \( Q = v_g\Sigma \) |
| Centrifuges | Tubular bowl, disc-stack, decanter, basket; flocculation helps fines |
| Filtration | Dead-end (cake grows) vs crossflow (swept, standard for harvest); filter aids for mycelia |
| Precipitation | Ammonium sulfate (Cohn \( \log S = \beta - K_sI \)), solvents, PEG, isoelectric; concentration step, modest purification |
| Membranes | MF (µm, cells) · UF (kDa, proteins) · NF (small solutes) · RO (ions); \( J = \mathrm{TMP}/(\mu R) \) |
| Polarisation vs fouling | Reversible solute layer vs adsorbed/deposited material; above a critical TMP flux stops rising |
| Diafiltration | \( C/C_0 = e^{-N} \); 5 diavolumes = 99.3%, 7 = 99.9%; concentrate first, then diafilter |
| Chromatography | Affinity (capture, huge fold) · IEX (capacity) · HIC (binds at high salt) · RP · SEC last |
| IEX rule | Below pI → positive → cation exchanger (CM, S); above pI → anion exchanger (DEAE, Q) |
| Performance | \( N = 16(t_R/w)^2 \); \( \mathrm{HETP}=L/N \); \( R_s = 2\Delta t_R/(w_1+w_2) \); baseline at \( R_s \ge 1.5 \) |
| van Deemter | \( H = A + B/u + Cu \): an optimum velocity exists; faster is not sharper |
| Extraction | \( Y = KV_r/(1+KV_r) \); penicillin by pH swing; ATPS (PEG/dextran, PEG/salt) is gentle and scalable |
| Crystallisation | Purest, cheapest polish where it works (insulin, antibiotics, citric acid) |
| Drying | Lyophilisation (freeze, sublime, secondary drying; cryoprotectants; stay below collapse temperature) vs spray drying (seconds, cheap) |
| Purification table | Specific activity = activity/protein; fold = ratio to crude; yield = activity ratio |
Scale-Up and Plant Design
| Fact | Detail |
|---|---|
| Power | \( P = N_p\rho N^3D_i^5 \); \( N_p \approx 5 \) for a baffled Rushton turbine (turbulent); gassed power is lower |
| Per volume | \( P/V \propto N^3D_i^2 \); typical aerobic 1–5 kW m⁻³ |
| Geometry | \( D_i/D_T \approx 1/3 \), four baffles at \( D_T/10 \); tenfold volume ⇒ ×\( 10^{1/3} \) = 2.154 on every length |
| Constant \( P/V \) | \( N_2 = N_1(D_{i1}/D_{i2})^{2/3} \); tip speed rises as \( D_i^{1/3} \) |
| Constant tip speed | \( N \propto 1/D_i \); \( P/V \) falls steeply; used for shear-sensitive cultures |
| Impossible | Holding mixing time constant; large vessels always have gradients |
| Scale-down | Two-compartment reactors and CFD to reproduce heterogeneity on the bench |
| Seed train | 5–10% inoculum per stage |
| Plant | 316L electropolished steel, SIP/CIP, 0.2 µm air filters, WFI, clean steam, DCS/SCADA, PAT |
| Quality | GMP, IQ/OQ/PQ validation, batch records, change control; single-use trades capital and changeover against scale and extractables |
| India, GMO oversight | Rules under the Environment (Protection) Act, 1986; institutional biosafety committees; DBT and CDSCO as central bodies |
Metabolic Engineering and Synthetic Biology
| Fact | Detail |
|---|---|
| Definition | Directed improvement of cell properties by modifying specific reactions, with flux analysis to check the result |
| MFA | Stoichiometry plus measured uptake and secretion rates |
| ¹³C-MFA | Labelling patterns resolve parallel and cyclic pathways (glycolysis vs PPP split) |
| FBA | \( \mathbf{Sv}=0 \) + flux bounds + objective (usually growth), solved by linear programming; no kinetic parameters, no concentrations |
| MCA | \( C^J_i = \partial\ln J/\partial\ln E_i \); summation theorem \( \sum_iC^J_i = 1 \); elasticities are local sensitivities |
| Practical corollary | Single-gene overexpression gives small gains; control is shared |
| Strategies | Feedback-insensitive committed step; delete by-product routes; balance cofactors; tune expression libraries; transport engineering; compartmentalisation; dynamic growth/production switching |
| Examples | Artemisinic acid in engineered yeast; 1,3-propanediol; amino acids at commodity scale |
| Synthetic biology | Parts → devices → systems → chassis; standardised assembly (Gibson, Golden Gate) |
| Founding circuits | Toggle switch (two mutual repressors, bistable, 2000); repressilator (three repressors in a ring, oscillates, 2000) |
| Tools | DNA synthesis, CRISPR–Cas editing, CRISPRi/a with dCas9 (reversible, tunable), riboswitches and biosensors, orthogonal systems, minimal genomes, cell-free systems |
| Limits | Context dependence, metabolic burden and escape mutants, genetic instability, biocontainment requirements |
The Fifteen Equations
Back to: Chapter overview · Life Sciences and Biotechnology · Structure and Function of Biomolecules · General Aptitude