Isolation and Separation of Macromolecules: Chromatography, Electrophoresis, Centrifugation
Cell disruption, DNA/RNA/protein isolation, chromatography, SDS-PAGE, IEF, 2-D gels and centrifugation with worked numericals for CSIR NET Life Sciences.
- 19 min
On this page · 14 sections
Prerequisites
- Chemical Bonds, Stabilising Interactions and Biophysical Chemistry — pKa, pI and the “below pI is positive” rule decide which column a protein binds.
- Protein Structure, Conformation and Stability — quaternary structure and disulfides explain why native size and SDS size differ.
- Enzymes: Catalysis, Kinetics, Regulation and Isozymes — the purification table (specific activity, fold, yield) lives there.
The Hook: One Band, Three Answers
How CSIR NET asks it. Part B: which column for which protein, which molecule elutes first, what SDS or β-mercaptoethanol does, how IEF differs from SDS-PAGE, rate-zonal vs isopycnic gradients. Part C: native vs subunit mass from gel filtration plus SDS-PAGE, RCF and rpm conversions, Kav calculations, buoyant density and GC content, choosing a purification scheme from given pI and size data.
Step 1: Breaking Cells and Fractionating Them
| Method | Principle | Typical use |
|---|---|---|
| Osmotic lysis | Hypotonic swelling bursts cells without walls | Erythrocytes (“ghosts”), animal cells |
| Detergents (SDS, Triton X-100, NP-40) | Solubilise membranes; SDS also denatures | Total protein, nucleic acid extraction |
| Enzymatic | Lysozyme (bacterial peptidoglycan), cellulase/pectinase (plant walls), lyticase/zymolyase (yeast) | Spheroplasts, protoplasts |
| Homogenisers (Dounce, Potter–Elvehjem) | Shear in a close-fitting pestle | Soft tissues; organelles stay intact |
| French press, bead beating | High pressure through an orifice; grinding with glass beads | Bacteria, yeast |
| Sonication | Ultrasonic cavitation | Bacteria; also shears DNA to small fragments |
| Freeze–thaw, grinding in liquid N₂ | Ice crystals rupture membranes; brittle tissue powders | Plant and tough tissue |
Keep it cold and protected. Work at 0–4 °C; add protease inhibitors (PMSF for serine proteases, EDTA for metalloproteases), reducing agents (DTT, β-mercaptoethanol) for cytosolic proteins, and use an isotonic medium (commonly 0.25 M sucrose) when organelles must stay intact.
Marker enzymes identify fractions after centrifugation (the approach de Duve used to discover lysosomes):
| Fraction | Marker |
|---|---|
| Nuclei | DNA |
| Mitochondria | Succinate dehydrogenase, cytochrome c oxidase |
| Lysosomes | Acid phosphatase |
| Peroxisomes | Catalase |
| Microsomes (ER) | Glucose-6-phosphatase |
| Plasma membrane | 5’-nucleotidase, Na⁺/K⁺-ATPase |
| Cytosol | Lactate dehydrogenase |
Step 2: Isolating Nucleic Acids and Proteins
Genomic DNA
- Lyse cells (SDS or CTAB) and digest protein with proteinase K; remove RNA with RNase A.
- Phenol : chloroform : isoamyl alcohol (25 : 24 : 1) extraction. Proteins denature into the organic phase and interface; DNA stays in the upper aqueous phase.
- Ethanol precipitation: monovalent salt (for example sodium acetate) neutralises the phosphate backbone, then 2–2.5 volumes of cold ethanol (or about 0.7 volume isopropanol) precipitate DNA. Spin, wash with 70% ethanol, dissolve in TE buffer.
- CTAB (cetyltrimethylammonium bromide) is preferred for plant tissue rich in polysaccharides and polyphenols.
- Silica columns bind DNA in high concentrations of chaotropic salt (guanidinium) and release it in low-salt buffer or water.
Plasmid DNA: alkaline lysis
NaOH + SDS lyse cells and denature all DNA. Neutralisation with potassium acetate lets small, covalently closed plasmid strands snap back together (they never separated topologically), while long chromosomal DNA, protein and SDS form a precipitate removed by centrifugation. Ultrapure plasmid was classically banded in a CsCl–ethidium bromide gradient: supercoiled DNA binds less intercalator than linear or nicked DNA, so it is denser and bands lower.
RNA
- Guanidinium thiocyanate–phenol–chloroform (acid phenol) extraction: the chaotrope denatures RNases; at acidic pH DNA partitions to the interphase/organic phase, RNA stays aqueous.
- RNases are stable and everywhere: use DEPC-treated water, baked glassware, gloves.
- mRNA is pulled from total RNA on oligo(dT) beads or cellulose (binds the poly(A) tail).
Quality checks
| Check | Pure DNA | Pure RNA | Contaminant flagged |
|---|---|---|---|
| A₂₆₀/A₂₈₀ | about 1.8 | about 2.0 | Lower ratio → protein or phenol |
| A₂₆₀/A₂₃₀ | about 2.0–2.2 | about 2.0–2.2 | Lower ratio → guanidinium, carbohydrate, phenol |
| A₂₆₀ = 1.0 (1 cm) | 50 µg/mL dsDNA | 40 µg/mL | ssDNA about 33 µg/mL |
Proteins
- Salting out: at high ionic strength, salt ions compete for water and proteins aggregate. Ammonium sulfate fractionation is the classic first step (cheap, stabilising, very soluble).
- Dialysis (semipermeable membrane with a molecular-weight cut-off) or desalting columns remove salt; ultrafiltration concentrates.
- Precipitation with TCA or acetone concentrates protein for gels but denatures it.
- Purification is tracked with a purification table: specific activity rises, yield falls (worked example on the enzymes page).
Chromatography
All chromatography distributes solute between a stationary phase and a mobile phase. The partition coefficient \(K = C_{stationary}/C_{mobile}\); the larger K, the slower the solute moves.
Planar methods
- Paper chromatography (partition; water held in cellulose is the stationary phase) and thin-layer chromatography (adsorption on silica or alumina).
- Retention factor: \(R_f = \dfrac{\text{distance moved by solute}}{\text{distance moved by solvent front}}\), always between 0 and 1.
- Amino acids are detected with ninhydrin (purple; proline gives yellow). Calvin used 2-D paper chromatography with autoradiography to trace ¹⁴C in photosynthesis.
Column methods for proteins
| Method | Separates by | Binds / elutes | Key fact |
|---|---|---|---|
| Gel filtration (size exclusion) | Size and shape (Stokes radius) | No binding; isocratic | Largest elute first; beads of dextran (Sephadex), agarose (Sepharose), polyacrylamide |
| Ion exchange | Net charge | Bind at low salt; elute with a salt (or pH) gradient | DEAE, Q = positively charged = anion exchangers; CM, S = negatively charged = cation exchangers |
| Affinity | Specific biological binding | Elute with competing ligand, pH or chaotrope | Highest single-step purification |
| Hydrophobic interaction (HIC) | Surface hydrophobicity | Bind at high salt (ammonium sulfate); elute with decreasing salt | Proteins stay native; follows salting-out step naturally |
| Reversed phase (RP-HPLC) | Hydrophobicity | Bind in water; elute with increasing organic solvent (acetonitrile) | C₁₈ or C₈ chains; ideal for peptides, often denatures proteins |
| Hydroxyapatite | Calcium phosphate binding | Elute with phosphate gradient | Also separates ssDNA from dsDNA |
Gel filtration in numbers
- V₀ (void volume): volume outside the beads; molecules too large to enter elute here (measured with blue dextran).
- Vₜ (total bed volume); Vₑ = elution volume of the solute.
- Partition coefficient:
\(K_{av}\) = 0 for fully excluded, about 1 for fully included small molecules.
- Over the working range, \(K_{av}\) (or Vₑ) is linear in log M for globular proteins. Calibrate with standards, read the unknown.
- Gel filtration gives the native (oligomeric) size, but elongated proteins look larger than they are, because the column senses hydrodynamic radius, not mass.
Ion exchange: the pI rule
- At pH below pI, a protein is net positive → binds a cation exchanger (CM, S).
- At pH above pI, net negative → binds an anion exchanger (DEAE, Q).
- Elution: raise salt (Cl⁻ or Na⁺ outcompete the protein), or shift pH towards the pI. The protein with the weaker net charge elutes first.
Affinity tags and ligands
| Ligand on the column | Captures | Eluted by |
|---|---|---|
| Ni²⁺–NTA (or Co²⁺) | His₆-tagged protein | Imidazole (competes with His), low pH or EDTA |
| Glutathione | GST fusion | Reduced glutathione |
| Amylose | MBP fusion | Maltose |
| Protein A / Protein G | IgG (Fc region) | Low pH |
| Concanavalin A (lectin) | Glycoproteins with mannose/glucose | Methyl α-mannoside or α-glucoside |
| Oligo(dT) | Poly(A)⁺ mRNA | Low-salt buffer |
| Streptavidin | Biotinylated molecules | Very hard to elute (near-covalent affinity) |
| Substrate analogue, cofactor (e.g. Cibacron blue for NAD⁺-binding sites) | Enzymes | Free substrate or cofactor |
HPLC, GC and column performance
- HPLC: small, uniform particles packed at high pressure give sharp peaks and fast runs. Normal phase (polar stationary), reversed phase (non-polar stationary).
- Gas chromatography: volatile or derivatised compounds; carrier gas mobile phase; coupled to MS (GC-MS) in metabolomics.
- Resolution of two peaks: \(R_s = \dfrac{2(t_2 - t_1)}{w_1 + w_2}\); \(R_s \geq 1.5\) is baseline separation. Plate number \(N = 16\,(t_R/w)^2\): more plates, narrower peaks.
Electrophoresis
A molecule of charge q in field E moves at velocity v where the electric force balances friction: \(qE = fv\). Electrophoretic mobility \(\mu = v/E = q/f\). In a gel, sieving adds size dependence.
Agarose gels (nucleic acids)
- DNA’s charge-to-mass ratio is nearly constant (one phosphate per nucleotide), so separation is by size: mobility falls roughly linearly with log(length). DNA runs to the anode (+).
- Lower agarose percentage resolves larger fragments; polyacrylamide resolves small fragments, down to single-nucleotide differences (sequencing gels).
- Conformation matters: for the same plasmid, supercoiled DNA usually runs fastest, linear intermediate, nicked (open circular) slowest. Intercalators such as ethidium bromide change this by unwinding supercoils.
- Stains: ethidium bromide (intercalator, UV fluorescence, mutagen), safer SYBR-type dyes.
- Pulsed-field gel electrophoresis (PFGE): the field direction alternates; large molecules take longer to reorient, so fragments of hundreds of kb to Mb (yeast chromosomes, bacterial genomes after rare-cutter digestion) separate.
- Denaturing gels: formaldehyde or glyoxal for RNA (northern blots), urea for sequencing gels.
SDS-PAGE (proteins)
- SDS binds proteins at roughly a constant ratio (about 1.4 g SDS per g protein), coats them with negative charge and unfolds them; intrinsic charge becomes negligible. β-mercaptoethanol or DTT reduce disulfides. Separation becomes a function of polypeptide length.
- Polyacrylamide gel: acrylamide cross-linked by bis-acrylamide; polymerisation initiated by ammonium persulfate and catalysed by TEMED. Higher % = smaller pores = better for small proteins.
- Discontinuous (Laemmli) system: stacking gel (large pores, pH 6.8) over resolving gel (pH 8.8), Tris–glycine running buffer. At pH 6.8 glycine is mostly zwitterionic and slow (trailing ion), Cl⁻ is fast (leading ion); proteins are squeezed into a thin zone between them, then separate by size in the resolving gel where glycine becomes charged.
- Calibration: \(\log M\) is linear with relative mobility (\(R_f\)) over a range. Two markers bracketing the unknown are enough for interpolation on the log scale.
- Stains: Coomassie Brilliant Blue (simple, roughly quantitative), silver stain (much more sensitive), fluorescent stains. Glycoproteins and very basic or membrane proteins can run anomalously.
Reading SDS-PAGE with and without reducing agent
| Pattern | Interpretation |
|---|---|
| Same band ± reducing agent | No inter-chain disulfides |
| Non-reduced band = sum of reduced bands | Subunits joined by disulfides (IgG: 150 kDa non-reduced → 50 + 25 kDa reduced) |
| Gel filtration size > SDS size, unchanged by reduction | Non-covalent oligomer |
| Diagonal gel (non-reducing first dimension, reducing second) | Spots off the diagonal = disulfide-linked partners |
Native PAGE, IEF and 2-D gels
- Native PAGE: no SDS; separation by charge, size and shape; activity can be stained in the gel (zymograms, isozyme patterns such as LDH).
- Isoelectric focusing (IEF): a pH gradient formed by carrier ampholytes or an immobilised pH gradient (IPG) strip. A protein migrates until it reaches the pH equal to its pI, where net charge is zero, and stops (“focuses”). Resolution can be around 0.01 pH unit.
- 2-D gel electrophoresis (O’Farrell): IEF first (by pI) then SDS-PAGE (by mass) at right angles. Thousands of spots; the classic proteomics separation (see omics). Post-translational modifications such as phosphorylation appear as horizontal trains of spots (same mass, more acidic pI).
- Capillary electrophoresis: narrow fused-silica capillaries, high voltage, fast; the format for automated Sanger sequencing and STR typing.
- After electrophoresis, molecules are transferred to membranes for Southern (DNA), northern (RNA) and western (protein) blots; see immunotechniques.
Centrifugation
The basic quantities
Relative centrifugal force (RCF, “× g”):
$$\mathrm{RCF} = \frac{\omega^2 r}{g} = 1.118\times10^{-5}\, r\,(\mathrm{rpm})^2 \qquad (r \text{ in cm})$$Always report × g and time, never rpm alone, because RCF depends on rotor radius.
Sedimentation coefficient: \(s = \dfrac{v}{\omega^2 r}\), in Svedberg units (1 S = 10⁻¹³ s). The Svedberg equation:
$$s = \frac{M(1 - \bar{v}\rho)}{N_A f} \qquad\Rightarrow\qquad M = \frac{sRT}{D(1-\bar{v}\rho)}$$where \(\bar{v}\) = partial specific volume (about 0.73 mL/g for proteins), ρ = solvent density, f = frictional coefficient, D = diffusion coefficient.
- s increases with mass but is not additive: 50S + 30S = 70S ribosome; 60S + 40S = 80S. Shape enters through f.
- If \(\bar{v}\rho = 1\) (particle density equals medium density), s = 0: the particle neither sinks nor floats. That is the basis of isopycnic banding.
Types of centrifugation
graph TD
C["Centrifugation"] --> P["Preparative"]
C --> A["Analytical ultracentrifugation
optics follow boundaries:
sedimentation velocity (s, shape)
sedimentation equilibrium (M)"]
P --> D["Differential
pellets by size, stepwise g"]
P --> G["Density gradient"]
G --> RZ["Rate-zonal
pre-formed sucrose gradient
separates by s; stopped in time"]
G --> IP["Isopycnic (equilibrium)
CsCl self-forming gradient
separates by buoyant density"]Differential centrifugation of a homogenate (approximate values; protocols vary):
| Spin | Pellet |
|---|---|
| About 600–1,000 × g, 10 min | Nuclei, unbroken cells |
| About 10,000–20,000 × g, 20 min | Mitochondria, lysosomes, peroxisomes (chloroplasts in plants) |
| About 100,000 × g, 60 min | Microsomes (ER and plasma-membrane vesicles) |
| Higher g, longer | Ribosomes, large complexes; supernatant = cytosol |
| Feature | Rate-zonal | Isopycnic |
|---|---|---|
| Separates by | Sedimentation coefficient (size, shape) | Buoyant density only |
| Gradient | Shallow, pre-formed (sucrose, glycerol) | Steep, often self-forming (CsCl, Cs₂SO₄) or Percoll |
| Max gradient density vs particle | Lower than particle density | Spans the particle density |
| Time | Must stop before particles pellet | Run to equilibrium; time does not matter after that |
| Classic use | Polysome profiles, ribosomal subunits, 5S–20S protein complexes | Meselson–Stahl (¹⁵N/¹⁴N DNA), plasmid purification, GC content |
Buoyant density and GC content
In CsCl, dsDNA density rises with G + C content. The widely used empirical relation (Schildkraut and co-workers) is
$$\rho = 1.660 + 0.098\,(\text{mole fraction G+C})\ \ \mathrm{g\,cm^{-3}}$$So DNA with 50% GC bands near 1.709 g/cm³. RNA is denser than DNA and pellets in CsCl; proteins float at about 1.3 g/cm³. In Meselson–Stahl, ¹⁵N DNA is heavier than ¹⁴N DNA, and the hybrid band after one generation is the evidence for semiconservative replication (DNA replication).
Memory Tricks
- RCF scales with rpm squared: double the speed, four times the force.
- Rate-zonal = race; isopycnic = float level. Rate-zonal is a race stopped by the clock; isopycnic is where each particle finds the density it matches.
Don’t Confuse
| This | vs | That |
|---|---|---|
| Gel filtration: native size, oligomers intact | vs | SDS-PAGE: subunit (polypeptide) size |
| Rate-zonal: by s, stopped in time | vs | Isopycnic: by density, equilibrium |
| IEF: stops at pI | vs | Native PAGE: moves by charge/size, does not stop |
| Anion exchanger (DEAE, Q): positive resin | vs | Cation exchanger (CM, S): negative resin |
| HIC: bind at high salt, native | vs | Reversed phase: bind in water, elute with organic solvent, often denaturing |
| Salting out (high salt precipitates) | vs | Salting in (low salt increases solubility) |
| Southern (DNA) / northern (RNA) | vs | Western (protein, antibody probe) |
| Stacking gel pH 6.8, large pores | vs | Resolving gel pH 8.8, small pores |
| RCF (× g): transferable between rotors | vs | rpm: depends on rotor radius |
Common Mistakes
Practice
All questions below are original practice questions written in CSIR NET style. They are not previous-year questions.
Level 1: Foundation
- What is eluted with imidazole from a Ni²⁺–NTA column?
- In a 2-D gel, which separation is done first?
- A 60 kDa protein, a 20 kDa protein and a 150 kDa protein are run on a gel-filtration column. Which elutes first?
Answers
- A His-tagged protein (imidazole competes with histidine for the metal).
- Isoelectric focusing (by pI), then SDS-PAGE (by mass).
- The 150 kDa protein (assuming similar globular shapes).
Level 2: Part B Style
Q1 (practice). A rotor has a radius of 10 cm and is run at 12,000 rpm. The relative centrifugal force is closest to:
- (a) 1,300 × g
- (b) 16,000 × g
- (c) 160,000 × g
- (d) 12,000 × g
Answer and explanation
(b). \(\mathrm{RCF} = 1.118\times10^{-5}\times 10 \times (12{,}000)^2 = 1.118\times10^{-5}\times 1.44\times10^{9} \approx 16{,}100 \times g\). Enough to pellet mitochondria in a differential spin.
Q2 (practice). A protein with pI 5.0 must be captured by ion exchange at pH 8.0. Which resin and elution should be used?
- (a) CM-cellulose; elute with increasing NaCl
- (b) DEAE-cellulose; elute with increasing NaCl
- (c) DEAE-cellulose; elute by raising the pH
- (d) CM-cellulose; elute by lowering the salt
Answer and explanation
(b). At pH 8.0 (above pI) the protein is net negative, so it binds the positively charged anion exchanger DEAE. Increasing salt displaces it. Raising pH would make it more negative and bind it more tightly.
Q3 (practice). On a gel-filtration column, V₀ = 40 mL and Vₜ = 120 mL. A protein elutes at 80 mL. Its Kav is:
- (a) 0.33
- (b) 0.50
- (c) 0.67
- (d) 2.0
Answer and explanation
(b). \(K_{av} = (80 - 40)/(120 - 40) = 40/80 = 0.50\).
Q4 (practice). A purified antibody runs as a single 150 kDa band on non-reducing SDS-PAGE and as two bands of 50 kDa and 25 kDa with β-mercaptoethanol. The best interpretation is:
- (a) a non-covalent trimer of 50 kDa subunits
- (b) two heavy and two light chains held by disulfide bonds
- (c) proteolytic degradation during reduction
- (d) a 50 kDa protein that binds two molecules of SDS
Answer and explanation
(b). 2 × 50 + 2 × 25 = 150 kDa. The chains stay together in SDS without reducing agent, so the contacts include disulfides (the IgG H₂L₂ structure).
Level 3: Part C Style
Q1 (practice). A newly purified enzyme gives these results.
- Gel filtration (calibrated, Kav linear in log M): standards of 320 kDa at Kav 0.15 and 80 kDa at Kav 0.45. The enzyme elutes at Kav 0.30.
- SDS-PAGE with DTT (log M linear in Rf): markers of 80 kDa at Rf 0.30 and 20 kDa at Rf 0.70. The enzyme gives one band at Rf 0.50.
- SDS-PAGE without DTT: one band at the position of the 80 kDa marker.
Deduce the quaternary structure.
Answer and worked solution
- Native mass. Kav 0.30 is exactly midway between 0.15 and 0.45. Since log M is linear in Kav, the midpoint corresponds to the geometric mean: \(\sqrt{320 \times 80} = 160\) kDa.
- Subunit mass. Rf 0.50 is midway between 0.30 and 0.70: \(\sqrt{80\times20} = 40\) kDa.
- Non-reduced SDS-PAGE: 80 kDa = two 40 kDa chains joined by a disulfide bond.
- Conclusion: 160/40 = 4 subunits. The enzyme is a tetramer, made of two disulfide-linked dimers held together non-covalently (SDS separates the dimers, DTT separates the chains).
Caveat for real data: an elongated protein would look larger on gel filtration; analytical ultracentrifugation or light scattering (see biophysical methods) would confirm the mass.
Q2 (practice). DNA from four bacteria is banded in CsCl. Using \(\rho = 1.660 + 0.098\,f_{GC}\):
| Strain | Buoyant density (g/cm³) |
|---|---|
| P | 1.699 |
| Q | 1.709 |
| R | 1.717 |
| S | 1.729 |
(i) Calculate the GC content of R. (ii) Which strain’s DNA has the highest Tm in the same buffer? (iii) A culture of Q grown for many generations in ¹⁵N medium is shifted to ¹⁴N for exactly two generations. How many bands are seen and in what proportion?
Answer and worked solution
- \(f_{GC} = (1.717 - 1.660)/0.098 = 0.057/0.098 = 0.58\) → about 58% GC.
- S: highest buoyant density means highest GC, and Tm rises with GC content (Tm ≈ 69.3 + 0.41 × %GC in standard saline citrate; S has about 70% GC).
- After two generations: two bands, hybrid (¹⁵N/¹⁴N) and light (¹⁴N/¹⁴N), in a 1 : 1 ratio. No heavy band remains. This is the Meselson–Stahl prediction for semiconservative replication; conservative replication would give heavy and light bands in a 1 : 3 ratio.
Q3 (practice). A His₆-tagged cytosolic enzyme (pI 6.5, 55 kDa monomer) is expressed in E. coli. Consider these statements about a purification plan.
(A) After lysis and centrifugation, the supernatant can be loaded directly onto Ni²⁺–NTA and the enzyme eluted with an imidazole gradient. (B) Including 10 mM EDTA in the lysis buffer improves binding to Ni²⁺–NTA. (C) A final gel-filtration step would separate the monomer from aggregates and exchange the buffer. (D) At pH 8.0 the enzyme would bind a Q (quaternary ammonium) column.
Which combination is correct?
- (a) A, C and D only
- (b) A and B only
- (c) B, C and D only
- (d) A, B, C and D
Answer and worked solution
(a) A, C and D only.
- (A) Correct: the standard IMAC capture.
- (B) Wrong: EDTA chelates and strips Ni²⁺ from the resin, so the protein would not bind. (Many protocols avoid strong chelators or use low concentrations.)
- (C) Correct: gel filtration is the usual “polishing” step; aggregates elute in or near the void volume.
- (D) Correct: pH 8.0 is above pI 6.5, so the protein is negative and binds the strong anion exchanger Q.
Quick Revision Table
| Item | Fact |
|---|---|
| Marker enzymes | Mito: succinate DH; lysosome: acid phosphatase; peroxisome: catalase; ER: G6Pase; PM: 5’-nucleotidase; cytosol: LDH |
| DNA extraction | Proteinase K, phenol:chloroform:isoamyl alcohol 25:24:1, ethanol + salt; CTAB for plants |
| Plasmid | Alkaline lysis (NaOH/SDS, then KOAc); CsCl–EtBr: supercoiled bands lower |
| RNA | Guanidinium thiocyanate–acid phenol; DEPC; oligo(dT) for mRNA |
| Purity | A₂₆₀/A₂₈₀ 1.8 DNA, 2.0 RNA; A₂₆₀ 1 = 50 µg/mL dsDNA |
| Rf | Distance of solute / distance of solvent front |
| Gel filtration | Large first; Kav = (Vₑ − V₀)/(Vₜ − V₀); native size |
| Ion exchange | DEAE/Q anion; CM/S cation; pH < pI → cation exchanger |
| Affinity | His₆–Ni-NTA (imidazole); GST–glutathione; MBP–amylose; Protein A/G–IgG; ConA–glycoprotein |
| HIC / RP | High salt binding / organic solvent elution |
| SDS-PAGE | log M vs Rf linear; stacking pH 6.8, resolving 8.8; APS + TEMED |
| IEF / 2-D | Stops at pI; IEF then SDS |
| Agarose | Supercoiled usually fastest; PFGE for Mb DNA |
| RCF | 1.118 × 10⁻⁵ × r(cm) × rpm² |
| Svedberg | s = v/ω²r; 1 S = 10⁻¹³ s; 70S = 50S + 30S |
| Rate-zonal vs isopycnic | Sucrose, by s, timed vs CsCl, by density, equilibrium |
| CsCl density | ρ = 1.660 + 0.098 f(GC) |
Key Takeaways
What’s Next
- Biophysical Methods: Spectroscopy, Structure and Mass Spectrometry — once a molecule is pure, how its concentration, structure, size and interactions are measured.
- Omics, DNA Fingerprinting, Barcoding and Radiolabelling — 2-D gels and MS scaled up to whole proteomes; blots and radioactive probes.
- Carbohydrates, Lipids, Nucleic Acids and Vitamins — DNA structure and Tm behind buoyant density and gel behaviour.
- Quick Revision — the whole unit on one page.