Skip to content

Chemical Bonds, Stabilising Interactions and Biophysical Chemistry

Chemical bonds, weak interactions, the hydrophobic effect, pH and buffers, reaction kinetics, thermodynamics and colligative properties for CSIR NET.

  • 20 min read
  • Updated
On this page · 15 sections
  1. Prerequisites
  2. The Hook: The Buffer That Changed Overnight
  3. Atoms and Molecules: What Biology Uses
  4. Stabilising (Non-covalent) Interactions
  5. Water, pH and Buffers
  6. Reaction Kinetics
  7. Thermodynamics of Biological Systems
  8. Colligative Properties
  9. Memory Tricks
  10. Don’t Confuse
  11. Common Mistakes
  12. Practice
  13. Quick Revision Table
  14. Key Takeaways
  15. What’s Next

Prerequisites

  • Structure and Function of Biomolecules — the chapter map; this page is its foundation.
  • Chemical Sciences — the physical chemistry units there (thermodynamics, kinetics, acid–base equilibria) treat the same laws with more derivation.
  • Comfort with logarithms and exponentials. Part C numericals here are mostly one-line log calculations; the General Aptitude section drills that kind of quick arithmetic.

The Hook: The Buffer That Changed Overnight

How CSIR NET asks it. Part B asks direct concepts: which interaction is entropy-driven, the pI of an amino acid, what ΔG°’ means, which property is colligative. Part C asks you to calculate: the pH of a buffer, the ratio of acid to base needed, ΔG from an equilibrium constant, a half-life, or the effect of salt on an interaction.


Atoms and Molecules: What Biology Uses

An atom has a small nucleus of protons and neutrons surrounded by electrons in orbitals (s, p, d). The atomic number (protons) fixes the element; the outer (valence) electrons fix its bonding. Isotopes have the same number of protons but different numbers of neutrons, so they behave the same chemically, which is why they work as tracers: radioactive ³H (half-life about 12.3 years), ¹⁴C (about 5,730 years), ³²P (about 14.3 days) and ³⁵S (about 87 days), and the stable heavy isotope ¹⁵N (used by Meselson and Stahl).

Six elements (C, H, O, N, P, S) make up most of the mass of biomolecules. Their chemistry is set by valence and electronegativity.

ElementUsual covalent bondsPauling electronegativityBiological role
H12.20H-bond donor when bonded to N or O
C42.55Skeleton; C–H bonds are almost non-polar
N3 (4 when protonated)3.04Amines, amides, bases; H-bond donor and acceptor
O23.44Hydroxyl, carbonyl, carboxyl, phosphate; strongest common acceptor
P5 (as phosphate)2.19Phosphoesters, phosphoanhydrides (ATP), nucleic acid backbone
S22.58Thiols (Cys), thioesters (acetyl-CoA), disulfides

Hybridisation and geometry.

  • sp³ carbon: tetrahedral, about 109.5°; free rotation about single bonds (this is why chains are flexible).
  • sp² carbon or nitrogen: trigonal planar, 120°; a π bond prevents rotation. The peptide bond and aromatic rings (Phe, Tyr, Trp, nucleobases) are planar for this reason.
  • Water is bent (H–O–H angle about 104.5°). The two lone pairs and two O–H bonds make each water molecule able to take part in up to four hydrogen bonds.

Bond polarity. The larger the electronegativity difference, the more polar the bond. O–H and N–H bonds are polar (H-bond donors). C–H bonds are nearly non-polar, which is why hydrocarbon chains are hydrophobic.

Types of chemical bond

BondWhat it isBiological example
Covalent (σ, π)Shared electron pair(s)Every backbone bond; peptide bond; phosphodiester
Coordinate (dative)Both electrons from one partnerFe²⁺ to histidine and porphyrin N in haem; Zn²⁺ to Cys/His in zinc fingers; Mg²⁺–ATP
IonicElectrostatic attraction between full chargesSalt bridges (Lys–Glu); Mg²⁺ bridging phosphates
DisulfideCovalent S–S between two CysExtracellular proteins (insulin, antibodies)
Non-covalentWeak, reversible attractionsFolding, base pairing, ligand binding, membranes

Covalent bonds are strong: typical single-bond energies are a few hundred kJ/mol (for example C–C roughly 350 kJ/mol). Non-covalent interactions are one to two orders of magnitude weaker. Their strength comes from number: a protein or a DNA duplex holds together through hundreds of them acting at once.


Stabilising (Non-covalent) Interactions

Compare every weak interaction with thermal energy, RT ≈ 2.5 kJ/mol at 25 °C. An interaction only a little stronger than RT is made and broken constantly. That reversibility is what lets enzymes release products and DNA strands separate.

1. Electrostatic (ionic) interactions

Coulomb’s law gives the force between two charges \(q_1\) and \(q_2\) at distance \(r\):

$$F = \frac{q_1 q_2}{4\pi\varepsilon_0\,\varepsilon\, r^2}$$

The dielectric constant \(\varepsilon\) of the medium is the key. Water has \(\varepsilon \approx 78.5\) at 25 °C; a hydrocarbon such as hexane about 2. So the same ion pair is roughly 40 times stronger in a non-polar environment than in water. This explains three things CSIR NET likes:

  • Salt bridges on a protein surface contribute little (water screens them); a buried salt bridge can matter more.
  • High salt shields charges (Debye screening). It weakens ionic interactions: proteins elute from an ion-exchange column with a salt gradient; DNA strands, whose phosphates repel, become more stable in high salt.
  • Electrostatic forces are long-range (fall as 1/r²), unlike van der Waals forces.

Charge–dipole and dipole–dipole interactions are weaker electrostatic cousins. Ion hydration (a charge surrounded by oriented water dipoles) is a charge–dipole interaction.

2. Hydrogen bonds

A hydrogen bond is an attraction between a hydrogen atom covalently bonded to an electronegative donor (N–H, O–H) and a lone pair on an electronegative acceptor (O, N).

  • Donor-to-acceptor distance is typically about 2.7–3.1 Å; the H···acceptor distance is shorter than the sum of the two atoms’ van der Waals radii.
  • Strongest when linear (donor–H···acceptor near 180°). This directionality makes H-bonds specific: base pairing and α-helix geometry depend on it.
  • Energy is in the range of several kJ/mol up to about 20–30 kJ/mol, depending on geometry and environment. In water, forming an intramolecular H-bond in a protein only exchanges H-bonds with water, so its net contribution to stability is small; its main job is specificity.

Examples: Watson–Crick pairs (G·C three, A·T two), α-helix (C=O of residue i to N–H of i+4), β-sheets, enzyme–substrate recognition, ice and liquid water.

3. van der Waals interactions

Transient dipoles in one atom induce dipoles in a neighbour (London dispersion forces). The Lennard-Jones potential describes them:

$$V(r) = \frac{A}{r^{12}} - \frac{B}{r^{6}}$$

Attraction falls as \(r^{-6}\), so it works only at contact; the \(r^{-12}\) term is steep repulsion when electron clouds overlap. The minimum is at the van der Waals contact distance. Each contact is weak (below about 4 kJ/mol), but a well-packed protein interior or an antibody–antigen interface has very many, so shape complementarity matters.

Base stacking in nucleic acids combines van der Waals and dipole interactions between flat, stacked bases. It contributes more to duplex stability than the base-pair hydrogen bonds do.

4. The hydrophobic effect

Non-polar molecules cluster in water not because they attract each other strongly, but because water around a non-polar surface is forced into a more ordered cage-like (clathrate) arrangement. When non-polar groups come together, ordered water is released, so entropy of the water increases.

  • At room temperature the hydrophobic effect is entropy-driven (ΔS > 0, ΔH small).
  • It is the main driving force for protein folding, membrane bilayer and micelle formation, and the burial of non-polar ligands.
  • It weakens at low temperature (one cause of cold denaturation) and is disrupted by organic solvents and detergents.

Summary of weak interactions

InteractionDepends onRange / directionalityEffect of high saltEffect of non-polar solvent
IonicCharges, \(\varepsilon\)Long range, non-directionalWeakened (screened)Strengthened
Hydrogen bondDonor, acceptor geometryShort, directionalLittleStrengthened (no competing water)
van der WaalsClose contact, polarisabilityVery short, non-directionalLittleLittle
HydrophobicWater structure (entropy)ShortStrengthened (salting out)Abolished

Water, pH and Buffers

Ionisation of water

$$\mathrm{H_2O \rightleftharpoons H^+ + OH^-}, \qquad K_w = [\mathrm{H^+}][\mathrm{OH^-}] = 1.0\times10^{-14}\ \mathrm{M^2}\ \text{at 25 °C}$$

So pH + pOH = 14 at 25 °C, and neutral pH is 7.0 only at that temperature (\(K_w\) increases with temperature, so neutral pH falls as water warms).

\(\mathrm{pH} = -\log[\mathrm{H^+}]\). A change of one pH unit is a tenfold change in [H⁺].

Weak acids and the Henderson–Hasselbalch equation

For \(\mathrm{HA \rightleftharpoons H^+ + A^-}\), \(K_a = [\mathrm{H^+}][\mathrm{A^-}]/[\mathrm{HA}]\) and \(\mathrm{p}K_a = -\log K_a\). Taking logs:

$$\boxed{\mathrm{pH} = \mathrm{p}K_a + \log\frac{[\mathrm{A^-}]}{[\mathrm{HA}]}}$$

Consequences you must be able to use in seconds:

  • When [A⁻] = [HA], pH = pKa (the midpoint of the titration curve).
  • Each tenfold change in the ratio moves pH by one unit: ratio 10 → pH = pKa + 1; ratio 0.1 → pH = pKa − 1.
  • Fraction deprotonated \(= \dfrac{1}{1 + 10^{\,\mathrm{p}K_a - \mathrm{pH}}}\).

Buffers

A buffer is a weak acid with its conjugate base (or a weak base with its conjugate acid). Added H⁺ is taken up by A⁻; added OH⁻ is neutralised by HA.

  • Buffering capacity is maximal at pH = pKa and useful over roughly pKa ± 1.
  • Capacity increases with total buffer concentration; the pH is set by the ratio, not the total.
  • Dilution of a buffer (within limits) does not change its pH, because the ratio is unchanged.
Buffer systempKa (25 °C)Where it matters
Acetic acid / acetate4.76Lab buffers
H₃PO₄ / H₂PO₄⁻2.14—
H₂PO₄⁻ / HPO₄²⁻6.86Main intracellular buffer
HPO₄²⁻ / PO₄³⁻about 12.4—
H₂CO₃ / HCO₃⁻ (with dissolved CO₂)6.1 (apparent)Blood plasma
Histidine imidazole (side chain)about 6.0Proteins near neutral pH, haemoglobin
Trisabout 8.1Lab buffer; pKa strongly temperature-dependent

The bicarbonate buffer of blood

The bicarbonate system works at pH 7.4 even though its pKa is 6.1, because it is an open system: CO₂ is removed by the lungs and HCO₃⁻ is regulated by the kidneys. Using dissolved CO₂ (0.03 mM per mmHg of pCO₂):

$$\mathrm{pH} = 6.1 + \log\frac{[\mathrm{HCO_3^-}]}{0.03 \times p\mathrm{CO_2}}$$

With [HCO₃⁻] = 24 mM and pCO₂ = 40 mmHg, the ratio is 24/1.2 = 20, and pH = 6.1 + 1.30 = 7.40. Hypoventilation raises pCO₂ (respiratory acidosis); hyperventilation lowers it (respiratory alkalosis).

Amino acids as acids and bases

Each amino acid has at least two ionisable groups: α-COOH (pKa about 2) and α-NH₃⁺ (pKa about 9–10). At the isoelectric point (pI) the net charge is zero.

  • No ionisable side chain: pI = (pK₁ + pK₂)/2. Glycine (pK 2.34 and 9.60): pI = 5.97.
  • Acidic side chain: average the two pKa values on either side of the neutral form (the two acidic ones). Aspartate (1.88 and 3.65): pI = 2.77.
  • Basic side chain: average the two basic ones. Lysine (8.95 and 10.53): pI = 9.74. Histidine (6.00 and 9.17): pI = 7.59.

(Values from Lehninger’s amino acid table.) Below its pI a protein is net positive and binds a cation exchanger; above its pI it is net negative and binds an anion exchanger. Proteins are least soluble at their pI, which is why isoelectric precipitation works.

graph LR
    A["pH below pI
net charge +"] --> B["pH = pI
net charge 0
least soluble"] B --> C["pH above pI
net charge -"] A -.-> D["binds cation exchanger
(CM-cellulose)"] C -.-> E["binds anion exchanger
(DEAE-cellulose)"]

Reaction Kinetics

Rate laws and order

For \(a\mathrm{A} + b\mathrm{B} \to \text{products}\), rate \(= k[\mathrm{A}]^m[\mathrm{B}]^n\). The order (m + n) is found by experiment; it equals the stoichiometry only for elementary steps. Molecularity is the number of molecules in one elementary step (uni-, bi-molecular) and is always a whole number.

OrderIntegrated rate lawHalf-lifeLinear plotUnits of k
Zero\([A] = [A]_0 - kt\)\([A]_0/2k\)[A] vs tM s⁻¹
First\(\ln[A] = \ln[A]_0 - kt\)\(0.693/k\) (independent of [A]₀)ln[A] vs ts⁻¹
Second (one reactant)\(1/[A] = 1/[A]_0 + kt\)\(1/(k[A]_0)\)1/[A] vs tM⁻¹ s⁻¹

Radioactive decay and many unimolecular conversions are first order. A reaction with one reactant in large excess behaves as pseudo-first order (this is exactly how an enzyme at very low [S] behaves, see enzyme kinetics). An enzyme saturated with substrate shows zero-order dependence on [S].

Temperature: Arrhenius and transition-state theory

$$k = A\,e^{-E_a/RT} \qquad\Longrightarrow\qquad \ln\frac{k_2}{k_1} = \frac{E_a}{R}\left(\frac{1}{T_1} - \frac{1}{T_2}\right)$$

A plot of ln k against 1/T has slope \(-E_a/R\). Biologists often quote Q₁₀, the factor by which rate rises for a 10 °C rise (about 2–3 for many enzyme-catalysed reactions within their working range).

Transition-state (Eyring) theory writes

$$k = \frac{k_B T}{h}\, e^{-\Delta G^{\ddagger}/RT}$$

where \(k_BT/h \approx 6.2\times10^{12}\ \mathrm{s^{-1}}\) at 25 °C. The activation free energy \(\Delta G^\ddagger\) sets the rate; the overall \(\Delta G\) sets the direction and extent. Catalysts (enzymes) lower \(\Delta G^\ddagger\) equally for the forward and reverse reactions, so they change neither \(\Delta G\) nor \(K_{eq}\). At 25 °C, every 5.7 kJ/mol lowering of \(\Delta G^\ddagger\) speeds the reaction tenfold.


Thermodynamics of Biological Systems

The three functions

  • First law: energy is conserved; ΔU = q − w. For processes at constant pressure the heat exchanged is the enthalpy change, ΔH (negative = exothermic).
  • Second law: the entropy of the universe increases in any spontaneous process. Living cells keep low internal entropy by increasing the entropy of their surroundings (heat, small molecules such as CO₂ and H₂O).
  • Gibbs free energy combines both at constant T and P:
$$\Delta G = \Delta H - T\Delta S$$

ΔG < 0: spontaneous (exergonic). ΔG > 0: non-spontaneous (endergonic). ΔG = 0: at equilibrium. “Spontaneous” says nothing about speed: glucose plus O₂ has a large negative ΔG but is stable for years without a catalyst.

ΔHΔSSpontaneous?
−+Always
+−Never
−−At low T (enthalpy wins)
++At high T (entropy wins), e.g. protein unfolding above Tm

Standard free energy and the equilibrium constant

The biochemical standard state (written ΔG°’ or ΔG’°) is: 25 °C (298 K), 1 atm, all solutes 1 M except H⁺ at 10⁻⁷ M (pH 7), water at 55.5 M, and Mg²⁺ at 1 mM where relevant. The actual free-energy change depends on concentrations:

$$\Delta G = \Delta G^{\circ\prime} + RT \ln Q, \qquad \Delta G^{\circ\prime} = -RT\ln K'_{eq}$$

At 25 °C, \(RT\ln 10 = 5.71\) kJ/mol, so each tenfold change in K’eq shifts ΔG°’ by 5.71 kJ/mol:

K’eqΔG°’ (kJ/mol) at 25 °C
10³−17.1
10²−11.4
10−5.7
10
10⁻¹+5.7
10⁻²+11.4
10⁻³+17.1

Additivity and redox

Free-energy changes are additive: an endergonic reaction proceeds when coupled through a shared intermediate to an exergonic one (the basis of ATP coupling, covered in bioenergetics).

For oxidation–reduction, the standard reduction potential difference gives

$$\Delta G^{\circ\prime} = -nF\Delta E^{\circ\prime}, \qquad F = 96.485\ \mathrm{kJ\,V^{-1}\,mol^{-1}}$$

with \(\Delta E^{\circ\prime} = E^{\circ\prime}_{\text{acceptor}} - E^{\circ\prime}_{\text{donor}}\). Electrons flow spontaneously toward the more positive E°'.


Colligative Properties

Colligative properties depend on the number of solute particles, not their identity. There are four:

PropertyEquation (dilute, ideal)Notes
Vapour-pressure lowering\(\Delta P = x_{\text{solute}}\,P^\circ\) (Raoult’s law)Basis of the other three
Boiling-point elevation\(\Delta T_b = iK_b m\)\(K_b\)(water) = 0.512 K kg mol⁻¹
Freezing-point depression\(\Delta T_f = iK_f m\)\(K_f\)(water) = 1.86 K kg mol⁻¹; used in osmometers
Osmotic pressure\(\pi = iMRT\) (van ’t Hoff)The one biology uses most
  • i is the van ’t Hoff factor: 1 for glucose or urea, close to 2 for NaCl, close to 3 for CaCl₂ (slightly less in reality because of ion pairing).
  • Osmolarity = \(i \times M\) (osmol/L); osmolality = osmol/kg solvent. Human plasma osmolality is about 290 mOsm/kg.
  • Because osmotic pressure is large even for dilute solutions, cells store glucose as glycogen (one particle instead of thousands) and plants and bacteria need cell walls to resist turgor.
  • Isotonic solution: no net water movement (0.9% NaCl, about 0.15 M, for mammalian cells). Hypotonic: water enters, animal cells swell and may lyse (used to lyse red cells). Hypertonic: water leaves, cells shrink (plasmolysis in plants).
  • Molecular-weight determination: osmometry gives the number-average molar mass of a macromolecule, because π counts particles.

Memory Tricks

Don’t Confuse

ThisvsThat
pKa: property of a group (pH where it is half-dissociated)vspI: property of a whole molecule (pH where net charge is zero)
Buffer pH set by the ratio [A⁻]/[HA]vsBuffer capacity set by total concentration and closeness of pH to pKa
ΔG°’: fixed constant at standard conditionsvsΔG: actual value at cellular concentrations
ΔG decides directionvsΔG‡ decides rate
Order: experimental exponent, can be fractionalvsMolecularity: number of molecules in an elementary step, a whole number
Hydrophobic effect: entropy of watervsvan der Waals: weak attraction between atoms in contact
Osmolarity: per litre of solutionvsOsmolality: per kg of solvent

Common Mistakes


Practice

All questions below are original practice questions written in CSIR NET style. They are not previous-year questions.

Level 1: Foundation

  1. Which non-covalent interaction is driven mainly by an increase in the entropy of water?
  2. At what pH does a buffer have its maximum buffering capacity?
  3. Name the four colligative properties.
Answers
  1. The hydrophobic effect.
  2. At pH = pKa of the weak acid.
  3. Relative lowering of vapour pressure, elevation of boiling point, depression of freezing point, osmotic pressure.

Level 2: Part B Style

Q1 (practice). A solution contains 0.10 M acetic acid and 0.05 M sodium acetate (pKa 4.76). Its pH is closest to:

  • (a) 4.46
  • (b) 4.76
  • (c) 5.06
  • (d) 3.76
Answer and explanation

(a) 4.46. \(\mathrm{pH} = 4.76 + \log(0.05/0.10) = 4.76 - 0.30 = 4.46\). Option (c) comes from inverting the ratio.

Q2 (practice). A protein of pI 5.2 is loaded onto a DEAE-cellulose column in a buffer of pH 7.5 and low ionic strength. Which statement is correct?

  • (a) It does not bind, because it is positively charged.
  • (b) It binds, because it is negatively charged, and can be eluted with a salt gradient.
  • (c) It binds only if the pH is lowered to 5.2.
  • (d) It binds through hydrophobic interaction with DEAE.
Answer and explanation

(b). At pH 7.5 (above its pI) the protein is net negative. DEAE (diethylaminoethyl) is positively charged, an anion exchanger, so the protein binds. Rising salt screens the charges and elutes it. At pH = pI it would have no net charge and bind poorly.

Q3 (practice). For a reaction at 25 °C, K’eq = 0.01. Its ΔG°’ is approximately:

  • (a) −11.4 kJ/mol
  • (b) +5.7 kJ/mol
  • (c) +11.4 kJ/mol
  • (d) +22.8 kJ/mol
Answer and explanation

(c) +11.4 kJ/mol. \(\Delta G^{\circ\prime} = -RT\ln K = -(2.479)(\ln 0.01) = +11.4\) kJ/mol. Shortcut: two powers of ten below 1, so +2 × 5.71.

Q4 (practice). Which of the following is not a colligative property of a dilute solution?

  • (a) Osmotic pressure
  • (b) Depression of freezing point
  • (c) Optical rotation
  • (d) Lowering of vapour pressure
Answer and explanation

(c) Optical rotation. It depends on the identity (chirality) of the solute, not just on the number of particles.

Level 3: Part C Style

Q1 (practice). You must prepare 1 L of 0.10 M sodium phosphate buffer, pH 7.20, from NaH₂PO₄ and Na₂HPO₄ (pKa₂ = 6.86). How much of each (in mM) is needed?

Answer and worked solution

About 68.6 mM Na₂HPO₄ and 31.4 mM NaH₂PO₄.

  1. Ratio: \([\mathrm{HPO_4^{2-}}]/[\mathrm{H_2PO_4^-}] = 10^{7.20-6.86} = 10^{0.34} = 2.19\).
  2. Let base = x, acid = 0.10 − x. Then \(x/(0.10-x) = 2.19\), so \(x = 0.219/3.19 = 0.0686\) M.
  3. Base 68.6 mM, acid 31.4 mM; total 100 mM.

Check: more base than acid, because the target pH is above the pKa.

Q2 (practice). A patient’s arterial blood has [HCO₃⁻] = 24 mM. Calculate the pH when pCO₂ = 40 mmHg and when it rises to 60 mmHg (apparent pKa 6.1; CO₂ solubility 0.03 mM per mmHg). Name the disturbance in the second case, and state the two statements below that are correct.

(A) The rise in pCO₂ lowers pH by about 0.18 unit. (B) The pH change would be the same in a closed system because the pKa does not change. (C) Renal retention of HCO₃⁻ would move the pH back toward 7.4. (D) The bicarbonate buffer is effective at pH 7.4 because 7.4 is within one unit of its pKa.

  • (a) A and C
  • (b) A and D
  • (c) B and C
  • (d) C and D
Answer and worked solution

(a) A and C.

  • At 40 mmHg: \(\mathrm{pH} = 6.1 + \log(24/1.2) = 6.1 + 1.30 = 7.40\).
  • At 60 mmHg: \(\mathrm{pH} = 6.1 + \log(24/1.8) = 6.1 + 1.12 = 7.22\). Fall of 0.18: respiratory acidosis. (A) is correct.
  • (C) is correct: raising [HCO₃⁻] raises the ratio; this is renal compensation.
  • (B) is wrong: the point of the system is that it is open (CO₂ exchange with lungs), which is what makes it effective.
  • (D) is wrong: 7.4 is 1.3 units above 6.1, outside the classic ±1 range. Its effectiveness comes from the open system, not from pH being close to pKa.

Q3 (practice). A reaction has Eₐ = 50 kJ/mol. By what factor does its rate constant increase between 300 K and 310 K? If an enzyme lowers ΔG‡ of another reaction by 34.2 kJ/mol at 298 K, what is the rate enhancement?

Answer and worked solution

About 1.9-fold; about 10⁶-fold.

  1. \(\ln(k_2/k_1) = \dfrac{50\,000}{8.314}\left(\dfrac{1}{300} - \dfrac{1}{310}\right) = 6014 \times 1.075\times10^{-4} = 0.647\), so \(k_2/k_1 = e^{0.647} = 1.91\).
  2. Rate enhancement \(= e^{\Delta\Delta G^\ddagger/RT} = e^{34\,200/(8.314\times298)} = e^{13.8} \approx 1.0\times10^6\). Shortcut: 34.2/5.71 = 6 powers of ten.

Quick Revision Table

ItemValue or rule
RT at 25 °C / 37 °C2.48 / 2.58 kJ/mol
RT ln 10 at 25 °C5.71 kJ/mol (one power of ten)
Kw at 25 °C1.0 × 10⁻¹⁴ M²
Henderson–HasselbalchpH = pKa + log([A⁻]/[HA])
Buffer rangepKa ± 1; capacity maximal at pH = pKa
Phosphate pKa₂ / bicarbonate apparent pKa6.86 / 6.1
Blood[HCO₃⁻] 24 mM, pCO₂ 40 mmHg, ratio 20:1, pH 7.40
pI (Gly, Asp, Lys, His)5.97, 2.77, 9.74, 7.59
Dielectric constant waterabout 78.5 at 25 °C
Hydrophobic effectEntropy-driven, water release
van der WaalsAttraction ∝ r⁻⁶, repulsion ∝ r⁻¹²
First-order half-life0.693/k
ΔGΔH − TΔS; ΔG°’ + RT ln Q
ΔG°’ from K’eq / from ΔE°'−RT ln K’eq / −nFΔE°'
Kf / Kb of water1.86 / 0.512 K kg mol⁻¹
Osmotic pressureπ = iMRT

Key Takeaways

What’s Next