Rigid-Body Motion and Euler's Equations
CSIR NET classical mechanics: moments of inertia, plane rigid-body motion, rolling, compound pendulum, inertia tensor, Euler's dynamical equations, stability.
- 19 min
On this page · 13 sections
Prerequisites
- Generalized Coordinates and Lagrange’s Equations: degrees of freedom of a rigid body, rolling constraints, Lagrangians.
- Eigenvalues and the Cayley–Hamilton Theorem: principal axes are the eigenvectors of the (real symmetric) inertia tensor.
- Quadratic Forms: \( T = \frac{1}{2}\boldsymbol\omega^{\mathsf T}I\boldsymbol\omega \) is a positive-definite quadratic form.
The Hook: The Tennis Racket That Will Not Behave
Moments of Inertia
For a body rotating about a fixed axis, \( I = \sum m_i d_i^2 = \int d^2\,dm \), with \( d \) the distance from the axis. The radius of gyration \( k \) is defined by \( I = Mk^2 \).
| Body (mass \( M \)) | Axis | \( I \) |
|---|---|---|
| thin rod, length \( \ell \) | perpendicular, through centre | \( \frac{1}{12}M\ell^2 \) |
| thin rod, length \( \ell \) | perpendicular, through one end | \( \frac{1}{3}M\ell^2 \) |
| thin ring, radius \( R \) | symmetry axis | \( MR^2 \) |
| thin ring | a diameter | \( \frac{1}{2}MR^2 \) |
| uniform disc / solid cylinder | symmetry axis | \( \frac{1}{2}MR^2 \) |
| uniform disc | a diameter | \( \frac{1}{4}MR^2 \) |
| solid cylinder, length \( \ell \) | perpendicular, through centre | \( M\left(\frac{R^2}{4} + \frac{\ell^2}{12}\right) \) |
| solid sphere | a diameter | \( \frac{2}{5}MR^2 \) |
| thin spherical shell | a diameter | \( \frac{2}{3}MR^2 \) |
| rectangular plate \( a \times b \) | perpendicular, through centre | \( \frac{1}{12}M(a^2 + b^2) \) |
| square plate, side \( a \) | any line in its plane through the centre | \( \frac{1}{12}Ma^2 \) |
The last row of the table follows from the perpendicular axis theorem: by symmetry \( I_x = I_y \) for every pair of perpendicular in-plane axes through the centre of a square, and \( I_x + I_y = I_z = \frac{1}{6}Ma^2 \). So a square plate has the same moment, \( \frac{1}{12}Ma^2 \), about its diagonal as about a median.
Plane Motion of a Rigid Body
A lamina (or any body moving parallel to a fixed plane) has 3 degrees of freedom: the position \( (x_G, y_G) \) of the centre of mass and an angle \( \theta \).
Chasles’s theorem (plane version). Every displacement is a translation of \( G \) followed by a rotation about \( G \). At each instant, unless the motion is a pure translation, there is a point of the plane (possibly outside the body) with zero velocity: the instantaneous centre of rotation. For a wheel rolling without slipping, it is the point of contact.
In Lagrangian form, \( L = \frac{1}{2}M(\dot x_G^2 + \dot y_G^2) + \frac{1}{2}I_G\dot\theta^2 - V \), with the constraints substituted.
Rolling down an incline
A round body (radius \( R \), \( I_G = Mk^2 \)) rolls without slipping down a plane inclined at \( \alpha \). With \( x \) the distance travelled, \( \dot\theta = \dot x/R \):
$$L = \tfrac{1}{2}M\left(1 + \frac{k^2}{R^2}\right)\dot x^2 + Mgx\sin\alpha \quad\Longrightarrow\quad \boxed{\ddot x = \frac{g\sin\alpha}{1 + k^2/R^2}.}$$The friction force is \( f = Mg\sin\alpha\,\dfrac{k^2}{R^2 + k^2} \), and rolling without slipping needs \( \mu \ge \tan\alpha\,\dfrac{k^2}{R^2 + k^2} \). Rolling friction does no work (the contact point is at rest), so energy is conserved: \( v^2 = \dfrac{2gh}{1 + k^2/R^2} \) after a drop \( h \).
| Body | \( k^2/R^2 \) | acceleration | rotational share of KE | minimum \( \mu \) |
|---|---|---|---|---|
| ring / thin hollow cylinder | 1 | \( \frac{1}{2}g\sin\alpha \) | \( \frac{1}{2} \) | \( \frac{1}{2}\tan\alpha \) |
| disc / solid cylinder | \( \frac{1}{2} \) | \( \frac{2}{3}g\sin\alpha \) | \( \frac{1}{3} \) | \( \frac{1}{3}\tan\alpha \) |
| solid sphere | \( \frac{2}{5} \) | \( \frac{5}{7}g\sin\alpha \) | \( \frac{2}{7} \) | \( \frac{2}{7}\tan\alpha \) |
| thin spherical shell | \( \frac{2}{3} \) | \( \frac{3}{5}g\sin\alpha \) | \( \frac{2}{5} \) | \( \frac{2}{5}\tan\alpha \) |
None of these depends on \( M \) or \( R \): only the shape (through \( k/R \)) matters. The smaller \( k/R \), the faster the body.
The compound pendulum
A rigid body swings about a fixed horizontal axis through \( O \), at distance \( h \) from \( G \). With \( I_O = M(k^2 + h^2) \) (\( k \) the radius of gyration about the parallel axis through \( G \)):
$$I_O\ddot\theta = -Mgh\sin\theta \quad\Longrightarrow\quad \boxed{T_0 = 2\pi\sqrt{\frac{k^2 + h^2}{gh}}} \ \text{(small oscillations)}.$$- Equivalent simple pendulum length: \( \ell_{\text{eq}} = h + \frac{k^2}{h} \).
- Minimum period when \( h = k \), with \( \ell_{\text{eq}} = 2k \).
- Reciprocity: the point at distance \( \frac{k^2}{h} \) beyond \( G \) (the centre of oscillation) gives the same period when used as the pivot. This is the principle of the reversible (Kater’s) pendulum.
- Rod of length \( \ell \) pivoted at one end: \( h = \frac{\ell}{2} \), \( k^2 = \frac{\ell^2}{12} \), \( \ell_{\text{eq}} = \frac{2\ell}{3} \), \( T_0 = 2\pi\sqrt{\frac{2\ell}{3g}} \). Minimum period for a rod: pivot at \( h = \frac{\ell}{2\sqrt 3} \) from the centre.
Rotation in Space: the Inertia Tensor
For a rigid body rotating with angular velocity \( \boldsymbol\omega \) about a fixed point \( O \) (or about \( G \)), \( \mathbf{v}_i = \boldsymbol\omega\times\mathbf{r}_i \) and
$$\mathbf{L} = \sum m_i\,\mathbf{r}_i\times(\boldsymbol\omega\times\mathbf{r}_i) = I\boldsymbol\omega, \qquad T = \tfrac{1}{2}\boldsymbol\omega^{\mathsf T}I\boldsymbol\omega = \tfrac{1}{2}\boldsymbol\omega\cdot\mathbf{L},$$with the inertia tensor
$$I = \begin{pmatrix}I_{xx} & I_{xy} & I_{xz}\\ I_{yx} & I_{yy} & I_{yz}\\ I_{zx} & I_{zy} & I_{zz}\end{pmatrix}, \qquad I_{xx} = \sum m(y^2 + z^2), \quad I_{xy} = -\sum m\,xy, \ \dots$$(Some books call \( \sum m\,xy \) the product of inertia and put the minus sign in the matrix; the matrix itself is the same.)
- \( I \) is real symmetric and positive semi-definite (positive definite unless all mass lies on a line through \( O \)), so it has three real non-negative eigenvalues \( I_1, I_2, I_3 \), the principal moments, with orthonormal eigenvectors, the principal axes.
- In principal axes, \( \mathbf{L} = (I_1\omega_1, I_2\omega_2, I_3\omega_3) \) and \( T = \frac{1}{2}(I_1\omega_1^2 + I_2\omega_2^2 + I_3\omega_3^2) \).
- \( \mathbf{L} \) is parallel to \( \boldsymbol\omega \) only if \( \boldsymbol\omega \) is along a principal axis (or two or three principal moments are equal and \( \boldsymbol\omega \) lies in the degenerate eigenspace).
- Triangle inequality: \( I_1 + I_2 \ge I_3 \) and cyclic; equality for a lamina (perpendicular axis theorem).
- A symmetry axis of the body is a principal axis; a plane of symmetry is perpendicular to a principal axis.
- Symmetric top: two equal principal moments, \( I_1 = I_2 \ne I_3 \). Spherical top: all three equal (sphere, cube about its centre).
Euler’s Dynamical Equations
The rate of change of \( \mathbf{L} \) in the inertial frame equals the external torque \( \mathbf{N} \) (about a fixed point or about \( G \)). For any vector, \( \left(\frac{d\mathbf{L}}{dt}\right)_{\text{space}} = \left(\frac{d\mathbf{L}}{dt}\right)_{\text{body}} + \boldsymbol\omega\times\mathbf{L} \). In the body frame along principal axes, the \( I_k \) are constants, which gives:
Rotation about a fixed axis
If the body is made to turn about a fixed axis \( z \) (not necessarily principal) with angular velocity \( \omega(t) \), then \( \mathbf{L} = (I_{xz}, I_{yz}, I_{zz})\,\omega \) in body axes and
$$N_x = I_{xz}\dot\omega - I_{yz}\omega^2, \qquad N_y = I_{yz}\dot\omega + I_{xz}\omega^2, \qquad N_z = I_{zz}\dot\omega.$$Only \( N_z \) drives the rotation. If the axis is not principal (\( I_{xz} \) or \( I_{yz} \ne 0 \)), the bearings must supply a rotating torque even at constant \( \omega \): the body is dynamically unbalanced. A fixed axis needs no bearing torque at constant \( \omega \) exactly when it is a principal axis.
Torque-free motion
With \( \mathbf{N} = 0 \), two quantities are conserved: \( \lvert\mathbf{L}\rvert^2 = I_1^2\omega_1^2 + I_2^2\omega_2^2 + I_3^2\omega_3^2 \) and \( 2T = I_1\omega_1^2 + I_2\omega_2^2 + I_3\omega_3^2 \). (\( \mathbf{L} \) is constant as a vector in space; in the body frame only its length is.)
Symmetric top, \( I_1 = I_2 \). The third equation gives \( \omega_3 = \) constant. The first two become
$$\dot\omega_1 = -\Omega\,\omega_2, \qquad \dot\omega_2 = \Omega\,\omega_1, \qquad \boxed{\Omega = \frac{I_3 - I_1}{I_1}\,\omega_3.}$$So \( (\omega_1, \omega_2) \) turns at constant rate \( \Omega \): in the body frame, \( \boldsymbol\omega \) precesses on a cone about the symmetry axis with constant magnitude. For an oblate body (\( I_3 > I_1 \)) the precession is in the same sense as the spin; for a prolate one (\( I_3 < I_1 \)), the opposite sense.
Stability of steady rotation. Let the body spin about principal axis 1, \( \omega_1 \approx \omega_0 \), with \( \omega_2, \omega_3 \) small. To first order \( \omega_1 \) stays constant and
$$\ddot\omega_2 = \frac{(I_3 - I_1)(I_1 - I_2)}{I_2I_3}\,\omega_0^2\,\omega_2.$$The coefficient is negative (bounded oscillation) iff \( I_1 \) is the largest or the smallest of the three moments.
Euler angles and the heavy symmetric top
The orientation is fixed by the three Euler angles \( (\varphi, \theta, \psi) \): precession, nutation (tilt of the symmetry axis), spin. For a symmetric top (\( I_1 = I_2 \)) with its tip fixed and centre of mass at distance \( \ell \) up the axis,
$$L = \tfrac{1}{2}I_1\left(\dot\theta^2 + \dot\varphi^2\sin^2\theta\right) + \tfrac{1}{2}I_3\left(\dot\psi + \dot\varphi\cos\theta\right)^2 - Mg\ell\cos\theta.$$\( \varphi \) and \( \psi \) are cyclic, so \( p_\psi = I_3\omega_3 \) and \( p_\varphi \) are conserved, and energy is conserved: three integrals for three degrees of freedom. For a fast top, the slow steady precession rate is approximately \( \dot\varphi \approx \dfrac{Mg\ell}{I_3\omega_3} \).
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| parallel axis: any body, one axis through \( G \) | perpendicular axis: laminae only, three axes through one point | |
| \( I_G \): smallest of all parallel-axis moments | \( I_O = I_G + Mh^2 \) | |
| \( \mathbf{L} = I\boldsymbol\omega \) (tensor) | \( \mathbf{L} \parallel \boldsymbol\omega \) only along principal axes | |
| torque-free: \( \mathbf{L} \) constant in space | \( \boldsymbol\omega \) generally not constant, in space or in the body | |
| torques about \( G \) or a fixed point | torques about an arbitrary accelerating point (extra terms) | |
| precession rate in the body frame \( \frac{I_3 - I_1}{I_1}\omega_3 \) | heavy fast top’s precession \( \frac{Mg\ell}{I_3\omega_3} \) | |
| largest / smallest axis: stable | intermediate axis: unstable | |
| rolling friction: does no work | sliding friction: dissipates energy |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper. In Level 3, as in Part C of the Mathematical Sciences paper, one or more options may be correct.
Level 1: Foundation
- Find the moment of inertia of a uniform rod of mass \( M \), length \( \ell \), about a perpendicular axis through one end.
- How many degrees of freedom does a lamina moving in its own plane have?
- What do Euler’s equations say about a torque-free spherical top (\( I_1 = I_2 = I_3 \))?
Answers
- \( \frac{1}{3}M\ell^2 \). \( \frac{1}{12}M\ell^2 + M\left(\frac{\ell}{2}\right)^2 \).
- 3: two for \( G \), one angle.
- \( \dot{\boldsymbol\omega} = 0 \). All coupling coefficients \( I_j - I_k \) vanish, so \( \boldsymbol\omega \) is constant.
Level 2: Part B Style
Practice Q1. A uniform solid sphere rolls without slipping down a plane inclined at \( 30^\circ \). Its acceleration is:
(a) \( \frac{g}{2} \) (b) \( \frac{5g}{14} \) (c) \( \frac{g}{3} \) (d) \( \frac{2g}{7} \)
Answer: (b)
\( \frac{g\sin\alpha}{1 + 2/5} = \frac{5}{7}\cdot\frac{g}{2} = \frac{5g}{14} \). Option (a) is sliding without friction; (c) is the disc.
Practice Q2. A uniform rod of length \( \ell \) swings as a compound pendulum about a horizontal axis perpendicular to it, at distance \( h \) from its centre. The period of small oscillations is least when \( h \) equals:
(a) \( \frac{\ell}{2} \) (b) \( \frac{\ell}{4} \) (c) \( \frac{\ell}{2\sqrt 3} \) (d) \( \frac{\ell}{\sqrt 3} \)
Answer: (c)
\( T_0 = 2\pi\sqrt{(k^2 + h^2)/(gh)} \) is least when \( h = k \), and for a rod \( k^2 = \frac{\ell^2}{12} \), so \( h = \frac{\ell}{2\sqrt 3} \approx 0.289\,\ell \).
Practice Q3. A uniform disc rolls without slipping on a horizontal floor. The fraction of its kinetic energy that is rotational is:
(a) \( \frac{1}{4} \) (b) \( \frac{1}{3} \) (c) \( \frac{1}{2} \) (d) \( \frac{2}{3} \)
Answer: (b)
\( \frac{\frac{1}{2}\cdot\frac{1}{2}MR^2\omega^2}{\frac{1}{2}Mv^2 + \frac{1}{4}MR^2\omega^2} \) with \( v = R\omega \): \( \frac{1/4}{1/2 + 1/4} = \frac{1}{3} \).
Practice Q4. A torque-free rigid body has principal moments \( I_1 = I_2 = 2 \), \( I_3 = 3 \) (in some units) and \( \omega_3 = 4 \). In the body frame, \( \boldsymbol\omega \) precesses about the symmetry axis with angular frequency:
(a) 1 (b) 2 (c) 6 (d) 8
Answer: (b)
\( \Omega = \frac{I_3 - I_1}{I_1}\omega_3 = \frac{3 - 2}{2}\cdot 4 = 2 \).
Level 3: Part C Style
Practice Q5. A rigid body with principal moments \( I_1 < I_2 < I_3 \) moves freely with no external torque about its centre of mass. Which statements are true?
(a) Steady rotation about principal axis 1 is stable to small perturbations (linear order). (b) Steady rotation about principal axis 2 is unstable. (c) The kinetic energy and the magnitude of the angular momentum are both conserved. (d) The angular velocity vector is constant in the body frame for every initial condition.
Answer: (a), (b) and (c)
- (a) True. For rotation about axis 1, the perturbation coefficient \( \frac{(I_3 - I_1)(I_1 - I_2)}{I_2I_3}\omega_0^2 \) is (positive)(negative) \( < 0 \): oscillation.
- (b) True. For axis 2, the analogous coefficient is \( \frac{(I_1 - I_2)(I_2 - I_3)}{I_1I_3}\omega_0^2 \), (negative)(negative) \( > 0 \): exponential growth.
- (c) True. \( \frac{d}{dt}\sum I_k\omega_k^2 = 2\sum\omega_k(I_k\dot\omega_k) = 0 \) and similarly for \( \sum I_k^2\omega_k^2 \), using Euler’s equations with \( \mathbf{N} = 0 \).
- (d) False. Only for rotation about a principal axis. Otherwise \( \boldsymbol\omega \) moves along the intersection of the energy and momentum ellipsoids.
Practice Q6. A uniform ladder of length \( \ell \) rests against a smooth wall on a smooth floor and is released from rest with angle \( \theta_0 = 60^\circ \) to the vertical. While it touches the wall, let \( \theta \) be its angle to the vertical. Which statements are true?
(a) \( \dot\theta^2 = \frac{3g}{\ell}(\cos\theta_0 - \cos\theta) \). (b) It leaves the wall when \( \cos\theta = \frac{1}{3} \). (c) Until it leaves the wall, its centre of mass moves on a circle of radius \( \frac{\ell}{2} \) about the corner. (d) The normal reaction of the floor equals the weight of the ladder throughout.
Answer: (a), (b) and (c)
- (a) True. Energy: \( \frac{M\ell^2}{6}\dot\theta^2 = \frac{Mg\ell}{2}(\cos\theta_0 - \cos\theta) \).
- (b) True. \( \cos\theta = \frac{2}{3}\cos 60^\circ = \frac{1}{3} \).
- (c) True. \( G = \frac{\ell}{2}(\sin\theta, \cos\theta) \) from the corner.
- (d) False. The floor reaction minus the weight equals \( M\ddot y_G \), and \( y_G = \frac{\ell}{2}\cos\theta \) accelerates downwards during the fall, so the reaction is less than \( Mg \).
Practice Q7. A thin ring, a uniform disc and a uniform solid sphere (masses and radii arbitrary) are released from rest at the same height on the same incline, and each rolls without slipping. Which statements are true?
(a) The sphere reaches the bottom first. (b) The speed of each at the bottom is independent of its mass and radius. (c) Of the three, the ring has the largest fraction of its kinetic energy in rotation, namely one half. (d) The minimum coefficient of friction needed for rolling without slipping is the same for all three.
Answer: (a), (b) and (c)
- (a) True. Acceleration \( \frac{g\sin\alpha}{1 + k^2/R^2} \) is largest for the smallest \( k^2/R^2 = \frac{2}{5} \).
- (b) True. \( v^2 = \frac{2gh}{1 + k^2/R^2} \).
- (c) True. Rotational share \( \frac{k^2/R^2}{1 + k^2/R^2} \): ring \( \frac{1}{2} \), disc \( \frac{1}{3} \), sphere \( \frac{2}{7} \).
- (d) False. \( \mu_{\min} = \tan\alpha\cdot\frac{k^2}{R^2 + k^2} \): \( \frac{1}{2}\tan\alpha \), \( \frac{1}{3}\tan\alpha \), \( \frac{2}{7}\tan\alpha \).
Quick Revision Table
| Idea | Fact |
|---|---|
| Axis theorems | \( I = I_G + Md^2 \); laminae: \( I_z = I_x + I_y \) |
| Key moments | rod \( \frac{1}{12}, \frac{1}{3} \); disc \( \frac{1}{2} \); ring 1; sphere \( \frac{2}{5} \); shell \( \frac{2}{3} \) (times \( M\ell^2 \) or \( MR^2 \)) |
| Plane motion | \( M\ddot{\mathbf{r}}_G = \mathbf{F} \), \( I_G\ddot\theta = \tau_G \), \( T = \frac{1}{2}Mv_G^2 + \frac{1}{2}I_G\dot\theta^2 \) |
| Rolling on incline | \( a = \frac{g\sin\alpha}{1 + k^2/R^2} \); \( \mu \ge \tan\alpha\frac{k^2}{R^2 + k^2} \) |
| Compound pendulum | \( T_0 = 2\pi\sqrt{\frac{k^2 + h^2}{gh}} \); min at \( h = k \) |
| Ladder | leaves wall at \( \cos\theta = \frac{2}{3}\cos\theta_0 \) |
| Inertia tensor | \( I_{xx} = \sum m(y^2 + z^2) \), \( I_{xy} = -\sum mxy \); \( \mathbf{L} = I\boldsymbol\omega \), \( T = \frac{1}{2}\boldsymbol\omega^{\mathsf T}I\boldsymbol\omega \) |
| Euler | \( I_1\dot\omega_1 - (I_2 - I_3)\omega_2\omega_3 = N_1 \) and cyclic |
| Fixed non-principal axis | bearing torque \( \propto \omega^2 \) even at constant \( \omega \) |
| Torque-free symmetric | \( \omega_3 \) const; \( \Omega = \frac{I_3 - I_1}{I_1}\omega_3 \) |
| Stability | largest/smallest axis stable, intermediate unstable |
| Heavy fast top | \( \dot\varphi \approx \frac{Mg\ell}{I_3\omega_3} \) |
Key Takeaways
What’s Next
- Small Oscillations: compound pendulums, coupled bodies and the stability analysis above, done systematically.
- Hamilton’s Canonical Equations: the Hamiltonian of the heavy top and its cyclic coordinates.
- Generalized Coordinates and Lagrange’s Equations for constraint counting.
- Classical Mechanics chapter overview.