Subspace and Product Topology
CSIR NET topology: subspace topology, relative closure, hereditary properties, product vs box topology, projections, and which properties survive products.
- 20 min
On this page · 12 sections
Prerequisites
- Topological Spaces, Bases and Dense Sets: bases, closures and the standard topologies on \( \mathbb{R} \), all used below.
- Metric Spaces and Several Variables: the subspace metric and the product metric on \( \mathbb{R}^n \) are the models for everything here.
- Sequences, Series, limsup and liminf: coordinatewise convergence in \( \mathbb{R}^n \).
The Hook: One Sequence, Two Answers
The Subspace Topology
Let \( (X, \tau) \) be a space and \( Y \subseteq X \). The subspace (relative) topology on \( Y \) is
$$\tau_Y = \{U \cap Y : U \in \tau\}.$$If \( \mathcal{B} \) is a basis of \( X \), then \( \{B \cap Y : B \in \mathcal{B}\} \) is a basis of \( Y \).
Open and closed in Y versus in X
| Statement | True? |
|---|---|
| \( A \) is closed in \( Y \) \( \iff A = C \cap Y \) for some closed \( C \subseteq X \) | always |
| \( \operatorname{cl}_Y(A) = \operatorname{cl}_X(A) \cap Y \) | always |
| If \( Y \) is open in \( X \): open in \( Y \Rightarrow \) open in \( X \) | yes |
| If \( Y \) is closed in \( X \): closed in \( Y \Rightarrow \) closed in \( X \) | yes |
| Open in \( Y \Rightarrow \) open in \( X \) (general \( Y \)) | no: \( [0, \frac{1}{2}) \) in \( Y = [0, 1] \) |
| \( \operatorname{int}_Y(A) = \operatorname{int}_X(A) \cap Y \) | no, only \( \supseteq \): \( A = Y = [0, 1] \) has \( \operatorname{int}_Y A = [0, 1] \), \( \operatorname{int}_X A \cap Y = (0, 1) \) |
Standard subspaces of R
| Subspace of usual \( \mathbb{R} \) | Topology it inherits |
|---|---|
| \( \mathbb{Z} \), \( \mathbb{N} \) | discrete (\( \{n\} = (n - \frac{1}{2}, n + \frac{1}{2}) \cap \mathbb{Z} \)) |
| \( \{\frac{1}{n} : n \in \mathbb{N}\} \) | discrete |
| \( \{0\} \cup \{\frac{1}{n}\} \) | not discrete: every neighbourhood of 0 contains \( \frac{1}{n} \) for large \( n \); it is homeomorphic to the one-point compactification of \( \mathbb{N} \) |
| \( \mathbb{Q} \) | not discrete; no isolated points; totally disconnected |
| \( (0, 1) \) | homeomorphic to \( \mathbb{R} \) |
| \( S^1 \subseteq \mathbb{R}^2 \) | not homeomorphic to any subspace of \( \mathbb{R} \) (removing a point leaves it connected; see Connectedness) |
A subspace inherits a different topology if the ambient one changes. As a subspace of \( \mathbb{R}_\ell \), \( \mathbb{Z} \) is still discrete, but \( [0, 1] \) is no longer connected (\( [0, \frac{1}{2}) \) is clopen in it).
Maps and subspaces
- The inclusion \( i : Y \hookrightarrow X \) is continuous, and the subspace topology is the coarsest topology on \( Y \) making it so.
- Restriction: if \( f : X \to Z \) is continuous, so is \( f|_Y \).
- Range: \( f : Z \to Y \) is continuous iff \( i \circ f : Z \to X \) is. You may shrink or enlarge the codomain freely.
- An embedding is a map \( f : Z \to X \) that is a homeomorphism onto the subspace \( f(Z) \). A continuous injection need not be one: \( t \mapsto (\cos t, \sin t) \) from \( [0, 2\pi) \) onto \( S^1 \) is a continuous bijection, but its inverse is discontinuous at \( (1, 0) \).
Hereditary properties
A property is hereditary if every subspace inherits it.
| Property | Every subspace? | Closed subspaces? |
|---|---|---|
| \( T_0 \), \( T_1 \), Hausdorff, regular, completely regular | yes | yes |
| Normal | no | yes |
| Metrizable | yes | yes |
| First countable, second countable | yes | yes |
| Separable | no (open subspaces: yes) | no in general |
| Lindelöf | no | yes |
| Compact | no | yes |
| Connected, path-connected | no | no |
| Discrete | yes | yes |
The Product Topology on X × Y
For spaces \( X \), \( Y \), the product topology on \( X \times Y \) has basis
$$\mathcal{B} = \{U \times V : U \text{ open in } X,\ V \text{ open in } Y\}.$$It is a basis because \( (U_1 \times V_1) \cap (U_2 \times V_2) = (U_1 \cap U_2) \times (V_1 \cap V_2) \). If \( \mathcal{B}_X \), \( \mathcal{B}_Y \) are bases, products of basic sets already form a basis. Not every open set is a product: the open disc in \( \mathbb{R}^2 \) is a union of rectangles but not a rectangle.
| Product | What you get |
|---|---|
| \( \mathbb{R} \times \mathbb{R} \) | usual \( \mathbb{R}^2 \) (rectangles and discs generate the same topology) |
| \( \mathbb{R}_\ell \times \mathbb{R}_\ell \) | the Sorgenfrey plane |
| \( \mathbb{R}_d \times \mathbb{R} \) (\( \mathbb{R}_d \) discrete) | a disjoint union of copies of \( \mathbb{R} \), one vertical line per real; this equals the dictionary-order topology on \( \mathbb{R} \times \mathbb{R} \) |
| \( S^1 \times S^1 \) | the torus |
| \( S^1 \times \mathbb{R} \) | the cylinder, homeomorphic to \( \mathbb{R}^2 \setminus \{0\} \) via \( (\theta, t) \mapsto e^t\theta \) |
| discrete \( \times \) discrete | discrete |
| indiscrete \( \times \) indiscrete | indiscrete |
Projections
The projections \( \pi_1 : X \times Y \to X \), \( \pi_2 : X \times Y \to Y \) are
- continuous: \( \pi_1^{-1}(U) = U \times Y \);
- open: the image of a basic \( U \times V \) (with \( V \ne \varnothing \)) is \( U \), and images commute with unions;
- not closed in general: the hyperbola \( H = \{(x, y) : xy = 1\} \) is closed in \( \mathbb{R}^2 \), but \( \pi_1(H) = \mathbb{R} \setminus \{0\} \) is not closed.
(If \( Y \) is compact, \( \pi_1 : X \times Y \to X \) is closed. That is the tube lemma at work; see Compactness.)
Closures, interiors and boundaries of products
$$\overline{A \times B} = \overline{A} \times \overline{B}, \qquad (A \times B)^\circ = A^\circ \times B^\circ,$$$$\partial(A \times B) = (\partial A \times \overline{B}) \cup (\overline{A} \times \partial B).$$For example, \( \overline{\mathbb{Q} \times \mathbb{Z}} = \mathbb{R} \times \mathbb{Z} \) in \( \mathbb{R}^2 \), and \( \partial([0, 1] \times [0, 1]) \) is the edge of the square, as expected.
Maps into a product
$$\boxed{f = (f_1, f_2) : Z \to X \times Y \text{ is continuous} \iff f_1 \text{ and } f_2 \text{ are continuous.}}$$Maps out of a product are different: continuity in each variable separately does not give joint continuity. \( f(x, y) = \frac{xy}{x^2 + y^2} \), \( f(0, 0) = 0 \), is continuous in \( x \) for fixed \( y \) and in \( y \) for fixed \( x \), but not continuous at the origin.
Infinite Products: Product versus Box
Let \( \{X_\alpha\}_{\alpha \in J} \) be spaces and \( X = \prod_{\alpha} X_\alpha \).
| Box topology | Product topology | |
|---|---|---|
| Basis | \( \prod U_\alpha \), every \( U_\alpha \) open | \( \prod U_\alpha \), every \( U_\alpha \) open, and \( U_\alpha = X_\alpha \) for all but finitely many \( \alpha \) |
| Subbasis description | \( \pi_\alpha^{-1}(U_\alpha) \), \( U_\alpha \) open in \( X_\alpha \) | |
| Characterisation | the coarsest topology making every projection continuous | |
| Finite \( J \) | same as product | same as box |
| Comparison | finer | coarser |
Convergence in R^ω: a test table
| Sequence in \( \mathbb{R}^\omega \) | Product: \( \to 0 \)? | Box: \( \to 0 \)? |
|---|---|---|
| \( (\frac{1}{n}, 0, 0, \dots) \) | yes | yes (only one coordinate moves) |
| \( (\frac{1}{n}, \frac{1}{n}, \frac{1}{n}, \dots) \) | yes | no (box \( \prod(-\frac{1}{k}, \frac{1}{k}) \)) |
| \( e_n \) (1 in place \( n \), 0 elsewhere) | yes | no (box \( \prod(-\frac{1}{2}, \frac{1}{2}) \)) |
| \( (\frac{1}{n}, \frac{1}{2n}, \frac{1}{3n}, \dots) \) | yes | no (box \( \prod(-\frac{1}{k^2}, \frac{1}{k^2}) \): need \( \frac{1}{kn} < \frac{1}{k^2} \), i.e. \( k < n \), for every \( k \)) |
| \( (n, 0, 0, \dots) \) | no | no |
Rule of thumb for the box topology: a sequence converges in the box topology only if, from some index on, all but finitely many coordinates are frozen at their limit values (and the rest converge). The general proof uses a box whose \( k \)-th side shrinks with \( k \).
Which properties survive products?
| Property | Finite products | Countable products (product top.) | Arbitrary products (product top.) | Box topology on \( \mathbb{R}^\omega \) |
|---|---|---|---|---|
| Hausdorff | yes | yes | yes | yes |
| Regular | yes | yes | yes | yes |
| Completely regular | yes | yes | yes | — |
| Normal | no (Sorgenfrey plane) | no | no | — |
| Metrizable | yes | yes | no in general (\( \mathbb{R}^{\mathbb{R}} \) is not even first countable) | no |
| First / second countable | yes | yes | no in general | no |
| Separable | yes | yes | no in general | no (there are uncountably many disjoint boxes) |
| Compact | yes | yes | yes (Tychonoff) | no (\( \{0, 1\}^\omega \) is an infinite closed discrete subset of box \( [0, 1]^\omega \)) |
| Connected | yes | yes | yes | no |
| Path-connected | yes | yes | yes | no |
A dash marks a case this page does not settle; it is not exam material.
The countable product \( \mathbb{R}^\omega \) (product topology) is metrizable by
$$D(x, y) = \sup_{n} \frac{\min(\lvert x_n - y_n \rvert, 1)}{n}.$$Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| open in the subspace \( Y \) | open in \( X \) (same only when \( Y \) is open in \( X \)) | |
| \( \operatorname{cl}_Y A = \operatorname{cl}_X A \cap Y \) (always) | \( \operatorname{int}_Y A \supseteq \operatorname{int}_X A \cap Y \) (can be strict) | |
| product topology (finitely many restricted factors) | box topology (all factors restricted) | |
| continuity into a product: check coordinates | continuity out of a product: separate continuity is not enough | |
| continuous bijection | homeomorphism (\( [0, 2\pi) \to S^1 \)) | |
| projection is open | projection is closed (false unless the other factor is compact) |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper. In Level 3, as in Part C, one or more options may be correct.
Level 1: Foundation
- Is \( \{2\} \) open in the subspace \( Y = [0, 1) \cup \{2\} \) of \( \mathbb{R} \)?
- Write a basis of the product topology on \( \mathbb{R}^\omega \).
- What is the closure of \( \mathbb{Q} \times (0, 1) \) in \( \mathbb{R}^2 \)?
Answers
- Yes. \( \{2\} = (\frac{3}{2}, \frac{5}{2}) \cap Y \). It is also closed in \( Y \), so \( 2 \) is an isolated point.
- Sets \( \prod_n U_n \) with each \( U_n \) open in \( \mathbb{R} \) and \( U_n = \mathbb{R} \) for all but finitely many \( n \).
- \( \overline{\mathbb{Q}} \times \overline{(0, 1)} = \mathbb{R} \times [0, 1] \).
Level 2: Part B Style
Practice Q1. Let \( Y = (0, 1] \cup [2, 3) \) with the subspace topology from \( \mathbb{R} \). Which subset of \( Y \) is closed in \( Y \) but not closed in \( \mathbb{R} \)?
(a) \( \{1\} \) (b) \( [2, \frac{5}{2}] \) (c) \( (0, 1] \) (d) \( [\frac{1}{2}, 1] \)
Answer: (c)
\( (0, 1] = [0, 1] \cap Y \) is closed in \( Y \); it is not closed in \( \mathbb{R} \) because 0 is a limit point outside it. (a), (b) and (d) are closed in \( \mathbb{R} \) already.
Practice Q2. Let \( X = \{0, 1\} \) carry the Sierpiński topology \( \{\varnothing, \{1\}, X\} \). The number of open sets in the product topology on \( X \times X \) is:
(a) 4 (b) 5 (c) 6 (d) 9
Answer: (c)
Basic sets \( U \times V \) with \( U, V \in \{\varnothing, \{1\}, X\} \) give \( \varnothing \), \( \{(1,1)\} \), \( \{1\} \times X \), \( X \times \{1\} \), \( X \times X \). Unions add one more: \( (\{1\} \times X) \cup (X \times \{1\}) \), the three points other than \( (0, 0) \). Total 6 (also checked by enumeration in Python). 9 is the number of basic products \( U \times V \), several of which coincide.
Practice Q3. Which of the following sequences converges to \( 0 \) in \( \mathbb{R}^\omega \) with the box topology?
(a) \( (\frac{1}{n}, 0, 0, 0, \dots) \) (b) \( (\frac{1}{n}, \frac{1}{n}, \frac{1}{n}, \dots) \) (c) \( e_n \) (d) \( (\frac{1}{n}, \frac{1}{2n}, \frac{1}{3n}, \dots) \)
Answer: (a)
For a box \( \prod U_k \ni 0 \), (a) lies in it as soon as \( \frac{1}{n} \in U_1 \). (b) never enters \( \prod(-\frac{1}{k}, \frac{1}{k}) \); (c) never enters \( \prod(-\frac{1}{2}, \frac{1}{2}) \); (d) never enters \( \prod(-\frac{1}{k^2}, \frac{1}{k^2}) \), since its \( k \)-th coordinate \( \frac{1}{kn} \) is at least \( \frac{1}{k^2} \) for \( k \ge n \). All four converge in the product topology.
Practice Q4. Let \( \pi_1 : \mathbb{R}^2 \to \mathbb{R} \) be the first projection. Which statement is false?
(a) \( \pi_1 \) is continuous. (b) \( \pi_1 \) maps open sets to open sets. (c) \( \pi_1 \) maps closed sets to closed sets. (d) \( \pi_1 \) is surjective.
Answer: (c)
\( \{(x, y) : xy = 1\} \) is closed (preimage of \( \{1\} \) under \( xy \)), and its projection \( \mathbb{R} \setminus \{0\} \) is not closed. (a), (b), (d) are true.
Level 3: Part C Style
Practice Q5. Consider \( \mathbb{R}^\omega \) with the box topology \( \tau_b \) and the product topology \( \tau_p \). Which statements are true?
(a) \( \tau_b \) is strictly finer than \( \tau_p \). (b) \( f(t) = (t, t, t, \dots) \) is continuous from \( \mathbb{R} \) to \( (\mathbb{R}^\omega, \tau_b) \). (c) \( (\mathbb{R}^\omega, \tau_p) \) is connected. (d) \( (\mathbb{R}^\omega, \tau_b) \) is connected.
Answer: (a) and (c)
- (a) True. Every product-basic set is box-basic; \( \prod(-1, 1) \) is box-open but contains no product-basic set around 0 (those leave all but finitely many coordinates free).
- (b) False. The preimage of \( \prod(-\frac{1}{n}, \frac{1}{n}) \) is \( \{0\} \).
- (c) True. It is path-connected by straight-line paths, which are continuous because each coordinate is.
- (d) False. Bounded and unbounded sequences form a separation, since each box \( \prod(x_n - 1, x_n + 1) \) stays on one side.
Practice Q6. Let \( X = \mathbb{R}_\ell \times \mathbb{R}_\ell \) (Sorgenfrey plane) and \( L = \{(x, -x) : x \in \mathbb{R}\} \). Which statements are true?
(a) \( X \) is separable. (b) \( L \) is closed in \( X \). (c) \( L \), with the subspace topology, is discrete. (d) \( L \), with the subspace topology, is separable.
Answer: (a), (b) and (c)
- (a) True. \( \mathbb{Q}^2 \) meets every \( [a, b) \times [c, d) \).
- (b) True. \( L \) is closed in the usual \( \mathbb{R}^2 \), and the Sorgenfrey topology is finer, so its complement is still open.
- (c) True. \( ([x, x + 1) \times [-x, -x + 1)) \cap L = \{(x, -x)\} \).
- (d) False. An uncountable discrete space has no countable dense subset (every singleton is open, so a dense set must be everything).
Practice Q7. Let \( Y = \{0\} \cup \{\frac{1}{n} : n \in \mathbb{N}\} \) and \( Z = \{\frac{1}{n} : n \in \mathbb{N}\} \), both subspaces of \( \mathbb{R} \). Which statements are true?
(a) \( Z \) is discrete. (b) \( Y \) is discrete. (c) Every function \( Z \to \mathbb{R} \) is continuous. (d) \( Z \) is closed in \( \mathbb{R} \).
Answer: (a) and (c)
- (a) True. \( \{\frac{1}{n}\} = (\frac{1}{n} - \delta, \frac{1}{n} + \delta) \cap Z \) for small \( \delta > 0 \) (any \( \delta < \frac{1}{n} - \frac{1}{n+1} \)).
- (b) False. \( \{0\} \) is not open in \( Y \): every interval around 0 contains \( \frac{1}{n} \) for large \( n \).
- (c) True. Every map out of a discrete space is continuous.
- (d) False. 0 is a limit point of \( Z \) not in \( Z \).
Quick Revision Table
| Idea | Fact |
|---|---|
| Subspace topology | \( \{U \cap Y\} \); basis \( \{B \cap Y\} \) |
| Relative closure | \( \operatorname{cl}_Y A = \operatorname{cl}_X A \cap Y \) |
| Open in open subspace | open in \( X \) |
| Hereditary | \( T_0 \)–\( T_3 \), metrizable, 1st/2nd countable; not normal, not separable |
| Product basis | \( U \times V \); for infinite products, all but finitely many factors whole |
| Projections | continuous, open, not closed |
| \( \overline{A \times B} \) | \( \overline{A} \times \overline{B} \) |
| Maps into products | continuous \( \iff \) each coordinate continuous (product topology) |
| Product convergence | coordinatewise |
| Box topology | finer; diagonal map not continuous; \( \mathbb{R}^\omega \) disconnected |
| Productive | Hausdorff, regular, compact (Tychonoff), connected, path-connected |
| Not productive | normal (Sorgenfrey plane) |
| \( \mathbb{R}^\omega \) (product) | metrizable, connected |
Key Takeaways
What’s Next
- Separation Axioms: \( T_0 \) to \( T_4 \), and why products and subspaces behave as in the table above.
- Connectedness and Compactness: the proofs that products of connected and compact spaces stay that way.
- Back to Topological Spaces, Bases and Dense Sets for the basis machinery used here.
- Metric Spaces and Several Variables for separate vs joint continuity in \( \mathbb{R}^2 \).