Skip to content

Rigid Bodies and Non-Inertial Frames

CSIR NET classical mechanics: inertia tensor, principal axes, Euler's equations, free precession, rolling, and Coriolis and centrifugal pseudoforces.

  • 18 min read
  • Updated
On this page · 14 sections
  1. Prerequisites
  2. The Hook: The Tumbling Phone
  3. Rigid Body Kinematics
  4. The Inertia Tensor
  5. Euler’s Equations and Free Rotation
  6. Rolling Without Slipping
  7. Non-Inertial Frames and Pseudoforces
  8. Memory Tricks
  9. Don’t Confuse
  10. Common Mistakes
  11. Practice
  12. Quick Revision Table
  13. Key Takeaways
  14. What’s Next

Prerequisites

The Hook: The Tumbling Phone

Rigid Body Kinematics

A rigid body has six degrees of freedom: three for the position of a reference point (usually the centre of mass), three for orientation (for example the Euler angles). Every infinitesimal motion is a translation plus a rotation about an instantaneous axis, with each point moving as

$$\mathbf{v} = \mathbf{V}_{\text{cm}} + \boldsymbol{\omega}\times\mathbf{r}'$$

where \( \mathbf{r}' \) is measured from the centre of mass. Chasles’ theorem says the same thing geometrically.

The Inertia Tensor

The angular momentum about a fixed point (or the centre of mass) is

$$\mathbf{L} = \sum m\,\mathbf{r}\times(\boldsymbol{\omega}\times\mathbf{r}) = I\boldsymbol{\omega}, \qquad \boxed{I_{ij} = \sum m\left(r^2\delta_{ij} - x_ix_j\right)}$$

(replace the sum by \( \int\rho\,dV \) for continuous bodies). Diagonal elements are moments of inertia, \( I_{xx} = \sum m(y^2 + z^2) \); off-diagonal elements are products of inertia, \( I_{xy} = -\sum mxy \). The rotational kinetic energy is

$$T_{\text{rot}} = \tfrac{1}{2}\boldsymbol{\omega}\cdot I\boldsymbol{\omega} = \tfrac{1}{2}\boldsymbol{\omega}\cdot\mathbf{L}$$

\( \mathbf{L} \) is not parallel to \( \boldsymbol{\omega} \) in general. It is parallel only when \( \boldsymbol{\omega} \) lies along a principal axis.

Principal axes

\( I \) is real and symmetric, so it has three real eigenvalues \( I_1, I_2, I_3 \) (the principal moments) and three mutually orthogonal eigenvectors (the principal axes). In the principal frame,

$$\mathbf{L} = (I_1\omega_1, I_2\omega_2, I_3\omega_3), \qquad T = \tfrac{1}{2}\left(I_1\omega_1^2 + I_2\omega_2^2 + I_3\omega_3^2\right)$$

Symmetry finds them for you: any axis of rotational symmetry, and any axis perpendicular to a plane of reflection symmetry, is principal. A body with two equal principal moments is a symmetric top; with all three equal (sphere, cube about its centre) every axis is principal.

Theorems that save integrals

  • Parallel axis: \( I = I_{\text{cm}} + Md^2 \) for parallel axes a distance \( d \) apart. In tensor form, \( I_{ij} = I^{\text{cm}}_{ij} + M(R^2\delta_{ij} - R_iR_j) \) for a shift \( \mathbf{R} \).
  • Perpendicular axis (plane laminae only): \( I_z = I_x + I_y \) with \( z \) normal to the plane.
Body (mass \( M \))Axis\( I \)
Thin rod, length \( L \)through centre, perpendicular\( ML^2/12 \)
Thin rodthrough one end, perpendicular\( ML^2/3 \)
Ring, radius \( R \)symmetry axis / diameter\( MR^2 \) / \( MR^2/2 \)
Disc or solid cylindersymmetry axis\( MR^2/2 \)
Discdiameter\( MR^2/4 \)
Solid spherediameter\( 2MR^2/5 \)
Hollow sphere (thin shell)diameter\( 2MR^2/3 \)
Rectangular plate \( a\times b \)perpendicular, through centre\( M(a^2 + b^2)/12 \)
Cube, side \( a \)any axis through centre\( Ma^2/6 \)

Euler’s Equations and Free Rotation

In the rotating principal-axis frame, \( \dot{\mathbf{L}}_{\text{space}} = \dot{\mathbf{L}}_{\text{body}} + \boldsymbol{\omega}\times\mathbf{L} = \mathbf{N} \) gives Euler’s equations:

$$\boxed{\begin{aligned} I_1\dot\omega_1 - (I_2 - I_3)\omega_2\omega_3 &= N_1\\ I_2\dot\omega_2 - (I_3 - I_1)\omega_3\omega_1 &= N_2\\ I_3\dot\omega_3 - (I_1 - I_2)\omega_1\omega_2 &= N_3 \end{aligned}}$$

(cyclic in 1, 2, 3). For torque-free motion both \( \lvert\mathbf{L}\rvert \) and \( T \) are conserved; \( \mathbf{L} \) is fixed in space.

Free symmetric top

With \( I_1 = I_2 \), the third equation gives \( \omega_3 = \) constant, and the first two give

$$\dot\omega_1 = -\Omega\omega_2, \quad \dot\omega_2 = \Omega\omega_1, \qquad \boxed{\Omega = \frac{I_3 - I_1}{I_1}\omega_3}$$

so \( \boldsymbol{\omega} \) precesses about the symmetry axis in the body frame at rate \( \Omega \), on a cone of fixed angle. Seen from space, the symmetry axis, \( \boldsymbol{\omega} \) and \( \mathbf{L} \) stay coplanar, and the symmetry axis precesses about the fixed \( \mathbf{L} \) at \( L/I_1 \).

  • Oblate body (\( I_3 > I_1 \), a disc or the Earth): \( \Omega \) has the same sign as \( \omega_3 \).
  • For a thin disc, \( I_3 = 2I_1 \) (perpendicular axis theorem), so \( \Omega = \omega_3 \).

Stability of rotation about a principal axis

Spin about axis 1 with a small perturbation. Euler’s equations give

$$\ddot\omega_2 = \frac{(I_1 - I_3)(I_2 - I_1)}{I_2I_3}\,\omega_1^2\,\omega_2$$

The coefficient is negative (oscillation, stable) if \( I_1 \) is the largest or the smallest moment, and positive (exponential growth, unstable) if \( I_1 \) is the intermediate one. This is the intermediate axis theorem (tennis racket theorem). With dissipation (a flexible body) only the axis of maximum moment is truly stable, which is why spinning satellites with flexible parts end up rotating about their axis of largest inertia.

Heavy symmetric top and gyroscope

A top of mass \( M \) spinning fast about its axis, with its centre of mass a distance \( l \) from the fixed tip, precesses slowly about the vertical at

$$\Omega_p \approx \frac{Mgl}{I_3\omega_3}$$

(torque \( Mgl\sin\theta \) changes \( \mathbf{L} \) sideways; \( \Omega_p = \tau/(L\sin\theta) \)). Faster spin, slower precession. Superposed nodding of the axis is nutation.

Rolling Without Slipping

For a wheel of radius \( R \), rolling means \( v_{\text{cm}} = \omega R \): the contact point is instantaneously at rest, and friction does no work. Then

$$T = \tfrac{1}{2}Mv^2\left(1 + \frac{I}{MR^2}\right), \qquad a = \frac{g\sin\theta}{1 + I/MR^2}\ \text{(down an incline)}$$
Body\( I/MR^2 \)\( a/(g\sin\theta) \)
Solid sphere2/55/7
Solid cylinder or disc1/22/3
Hollow sphere2/33/5
Ring or hollow cylinder11/2

Mass and radius cancel: a small solid sphere and a large one arrive together; any solid sphere beats any ring.

Non-Inertial Frames and Pseudoforces

Linearly accelerating frame

In a frame with acceleration \( \mathbf{A} \) relative to an inertial frame, \( m\mathbf{a}' = \mathbf{F} - m\mathbf{A} \). The pseudoforce \( -m\mathbf{A} \) acts like an extra uniform gravity: in a lift accelerating upward, \( g_{\text{eff}} = g + A \), and a pendulum’s period becomes \( 2\pi\sqrt{l/(g + A)} \). In a car accelerating horizontally, a hanging plumb line tilts back by \( \tan^{-1}(A/g) \).

Rotating frame

For a frame rotating at \( \boldsymbol{\omega} \) about a fixed origin, any vector obeys \( \left(\frac{d\mathbf{Q}}{dt}\right)_{\text{in}} = \left(\frac{d\mathbf{Q}}{dt}\right)_{\text{rot}} + \boldsymbol{\omega}\times\mathbf{Q} \). Applying this twice to \( \mathbf{r} \):

$$\boxed{m\mathbf{a}_{\text{rot}} = \mathbf{F} \underbrace{- 2m\boldsymbol{\omega}\times\mathbf{v}_{\text{rot}}}_{\text{Coriolis}} \underbrace{- m\boldsymbol{\omega}\times(\boldsymbol{\omega}\times\mathbf{r})}_{\text{centrifugal}} \underbrace{- m\dot{\boldsymbol{\omega}}\times\mathbf{r}}_{\text{Euler (azimuthal)}}}$$
PseudoforceMagnitude and directionNotes
Centrifugal\( m\omega^2\rho \), outward from the axis (\( \rho \) = distance from axis)potential \( -\tfrac{1}{2}m\omega^2\rho^2 \); acts on bodies at rest in the frame
Coriolis\( 2m\omega v_\perp \), perpendicular to both \( \boldsymbol{\omega} \) and \( \mathbf{v} \)zero for \( \mathbf{v}\parallel\boldsymbol{\omega} \); does no work
Euler\( m\dot\omega\rho \), azimuthalonly if the rotation rate changes

On the rotating Earth

Take \( \omega_E \approx 7.29\times10^{-5} \) rad/s and latitude \( \lambda \).

  • Effective gravity: \( \mathbf{g}_{\text{eff}} = \mathbf{g} - \boldsymbol{\omega}\times(\boldsymbol{\omega}\times\mathbf{r}) \). It is weakest at the equator, and a plumb line deviates from the true radial direction by about \( \frac{\omega^2R}{g}\sin\lambda\cos\lambda \), largest at 45° where it is about \( 1.7\times10^{-3} \) rad (roughly 0.1°).
  • Horizontal Coriolis deflection: a body moving horizontally is pushed to the right in the northern hemisphere and to the left in the southern; the horizontal effect scales as \( \sin\lambda \) and vanishes at the equator. Air flowing into a low-pressure region is therefore turned into an anticlockwise circulation in the northern hemisphere.
  • Free fall from height \( h \) is deflected east (everywhere), by $$d = \tfrac{1}{3}\omega g t^3\cos\lambda, \qquad t = \sqrt{2h/g}$$ largest at the equator.
  • Foucault pendulum: its plane of swing turns relative to the ground at \( \omega_E\sin\lambda \) (clockwise seen from above in the northern hemisphere), so a full turn takes one sidereal day divided by \( \sin\lambda \): about 24 h at a pole, no rotation at the equator, about 48 h at 30°.

Other rotating-frame results

  • Rotating fluid (bucket at angular speed \( \omega \)): the free surface is a paraboloid, \( z = \omega^2\rho^2/2g \), because it is an equipotential of gravity plus centrifugal potential.
  • Larmor’s theorem: a charge \( q \) in a weak uniform magnetic field \( \mathbf{B} \) moves, to first order in \( B \), as it would without the field in a frame rotating at the Larmor frequency \( \omega_L = qB/2m \) (in magnitude), because the Coriolis force then cancels the magnetic force.

Memory Tricks

Don’t Confuse

ThisvsThat
\( \mathbf{L} = I\boldsymbol{\omega} \) (tensor; \( \mathbf{L} \) can tilt from \( \boldsymbol{\omega} \))\( L = I\omega \) about a fixed principal axis
Body-frame precession \( (I_3 - I_1)\omega_3/I_1 \)Space-frame precession of the axis about \( \mathbf{L} \): \( L/I_1 \)
Free precession (no torque, from asymmetry)Gyroscopic precession \( Mgl/I_3\omega_3 \) (torque-driven)
Centrifugal: needs only position, acts at restCoriolis: needs velocity, vanishes at rest in the frame
Horizontal Coriolis \( \propto\sin\lambda \) (zero at equator)Eastward fall deflection \( \propto\cos\lambda \) (largest at equator)
Perpendicular-axis theorem: laminae onlyParallel-axis theorem: any body, but from the CM

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper.

Level 1: Foundation

  1. Moment of inertia of a uniform disc (mass \( M \), radius \( R \)) about a diameter?
  2. What is the Coriolis force on a particle moving parallel to the rotation axis?
  3. Roughly how long does a Foucault pendulum at latitude 30° take for one full turn of its plane?
Answers
  1. \( MR^2/4 \). Perpendicular axis theorem: \( I_x + I_y = MR^2/2 \) with \( I_x = I_y \).
  2. Zero. \( \boldsymbol{\omega}\times\mathbf{v} = 0 \) when \( \mathbf{v}\parallel\boldsymbol{\omega} \).
  3. About 48 hours. \( 1/\sin30° = 2 \) sidereal days (about 47.9 h).

Level 2: Part B Style

Practice Q1. The principal moments of inertia of a uniform cube of mass \( M \) and side \( a \) about one of its corners are:

(a) \( \tfrac{1}{6}Ma^2,\ \tfrac{11}{12}Ma^2,\ \tfrac{11}{12}Ma^2 \) (b) \( \tfrac{2}{3}Ma^2 \) (all three) (c) \( \tfrac{1}{6}Ma^2 \) (all three) (d) \( \tfrac{1}{6}Ma^2,\ \tfrac{2}{3}Ma^2,\ \tfrac{2}{3}Ma^2 \)

Answer: (a)

The tensor has diagonal \( \tfrac{2}{3}Ma^2 \) and off-diagonal \( -\tfrac{1}{4}Ma^2 \); its eigenvalues are \( \tfrac{1}{6}Ma^2 \) (along the body diagonal) and \( \tfrac{11}{12}Ma^2 \) twice. Option (b) reads off the diagonal and ignores the products of inertia; (c) is the result about the centre.

Practice Q2. A rigid body has principal moments \( I_1 < I_2 < I_3 \) and no external torque. Steady rotation is unstable to small perturbations about:

(a) axis 1 only (b) axis 2 only (c) axis 3 only (d) axes 1 and 3

Answer: (b) axis 2 only

For spin about axis \( k \), the perturbation obeys \( \ddot\omega_j \propto (I_k - I_i)(I_j - I_k)\omega_j \) for the other two axes \( i, j \). The coefficient is positive (growth) only when \( I_k \) lies between the other two: the intermediate axis.

Practice Q3. A solid sphere and a thin ring roll without slipping from rest down the same incline. The ratio of their accelerations \( a_{\text{sphere}}/a_{\text{ring}} \) is:

(a) 5/7 (b) 7/5 (c) 10/7 (d) 2

Answer: (c) 10/7

\( a = g\sin\theta/(1 + I/MR^2) \): sphere \( \tfrac{5}{7}g\sin\theta \), ring \( \tfrac{1}{2}g\sin\theta \). Ratio \( (5/7)/(1/2) = 10/7 \approx 1.43 \).

Practice Q4. A cylindrical bucket of water of radius 0.1 m rotates steadily about its axis at 10 rad/s. Taking \( g = 9.8 \) m/s\( ^2 \), the height of the water at the wall above that at the centre is closest to:

(a) 0.5 cm (b) 2.6 cm (c) 5.1 cm (d) 10.2 cm

Answer: (c) 5.1 cm

\( \Delta z = \omega^2R^2/2g = 100\times0.01/19.6 \approx 0.051 \) m. Option (d) forgets the factor 2.

Level 3: Part C Style

Practice Q5. A thin uniform disc (\( I_3 = 2I_1 \) about its symmetry axis) moves freely in space, spinning with \( \omega_3 \) about its symmetry axis and with a small angular velocity component perpendicular to it. Consider:

  1. In the body frame, \( \boldsymbol{\omega} \) precesses about the symmetry axis at angular frequency \( \omega_3 \).
  2. The symmetry axis, \( \boldsymbol{\omega} \) and \( \mathbf{L} \) lie in one plane at every instant.
  3. The rotational kinetic energy is constant.
  4. The vector \( \boldsymbol{\omega} \) is fixed in space.

Which are correct?

(a) 1 and 4 only (b) 1, 2 and 3 only (c) 2 and 3 only (d) 1, 2, 3 and 4

Answer: (b) 1, 2 and 3 only

1: \( \Omega = (I_3 - I_1)\omega_3/I_1 = (2I_1 - I_1)\omega_3/I_1 = \omega_3 \). True. 2: For a symmetric top, \( \mathbf{L} = I_1\boldsymbol{\omega}_\perp + I_3\omega_3\hat{\mathbf{e}}_3 \) is a combination of \( \boldsymbol{\omega}_\perp \) and \( \hat{\mathbf{e}}_3 \), as is \( \boldsymbol{\omega} \). All three lie in the plane spanned by \( \hat{\mathbf{e}}_3 \) and \( \boldsymbol{\omega}_\perp \). True. 3: No torque, no dissipation: \( T \) is conserved. True. 4: \( \mathbf{L} \) is fixed in space; \( \boldsymbol{\omega} \) is not parallel to it (the body is not spinning about a principal axis) and precesses around it. False.

Practice Q6. A stone is dropped from rest from a height of 100 m at latitude 60° N. Ignore air resistance; take \( g = 9.8 \) m/s\( ^2 \) and \( \omega_E = 7.29\times10^{-5} \) rad/s. Consider:

  1. The fall takes about 4.5 s.
  2. The stone lands about 1.1 cm east of the point vertically below.
  3. At the equator the same drop would give a deflection about twice as large.
  4. In the southern hemisphere at 60° S the deflection would be to the west.

Which are correct?

(a) 1 and 2 only (b) 1, 2 and 3 only (c) 1, 2 and 4 only (d) 1, 2, 3 and 4

Answer: (b) 1, 2 and 3 only

\( t = \sqrt{2h/g} = \sqrt{200/9.8} \approx 4.52 \) s. True. \( d = \tfrac{1}{3}\omega gt^3\cos\lambda = \tfrac{1}{3}\times7.29\times10^{-5}\times9.8\times92.2\times0.5 \approx 0.011 \) m. True. At the equator \( \cos0° = 1 \) versus \( \cos60° = 0.5 \): twice as large (2.2 cm). True. The deflection depends on \( \cos\lambda \), which is positive in both hemispheres: falling bodies deflect east everywhere. False.

Practice Q7. A bead slides without friction on a vertical circular hoop of radius 0.1 m that spins about its vertical diameter at 14 rad/s. Take \( g = 9.8 \) m/s\( ^2 \). Consider:

  1. The bottom of the hoop is an unstable equilibrium.
  2. A stable equilibrium exists at 60° from the bottom.
  3. Small oscillations about that stable point have angular frequency about 12.1 rad/s.
  4. Below about 9.9 rad/s the only stable equilibrium is the bottom.

Which are correct?

(a) 1 and 2 only (b) 2 and 3 only (c) 1, 2 and 3 only (d) 1, 2, 3 and 4

Answer: (d) 1, 2, 3 and 4

\( g/R = 98 \) s\( ^{-2} \) and \( \omega^2 = 196 \) s\( ^{-2} \). 1: \( \omega^2 > g/R \), so \( U''(0) = mR(g - \omega^2R) < 0 \). True. 2: \( \cos\theta_0 = g/\omega^2R = 9.8/19.6 = 0.5 \), \( \theta_0 = 60° \). True. 3: \( \omega\sin\theta_0 = 14\times0.866 \approx 12.1 \) rad/s. True. 4: \( \omega_c = \sqrt{g/R} = \sqrt{98} \approx 9.90 \) rad/s; below it \( \cos\theta_0 > 1 \) has no solution and the bottom is stable. True.

Quick Revision Table

IdeaResult
Inertia tensor\( I_{ij} = \sum m(r^2\delta_{ij} - x_ix_j) \); \( \mathbf{L} = I\boldsymbol{\omega} \)
Kinetic energy\( \tfrac{1}{2}\boldsymbol{\omega}\cdot I\boldsymbol{\omega} \)
Parallel / perpendicular axis\( I_{\text{cm}} + Md^2 \) / \( I_z = I_x + I_y \) (laminae)
Euler’s equations\( I_1\dot\omega_1 - (I_2 - I_3)\omega_2\omega_3 = N_1 \), cyclic
Free symmetric top\( \Omega_{\text{body}} = (I_3 - I_1)\omega_3/I_1 \)
Stabilitystable about max and min \( I \); intermediate unstable
Gyroscope\( \Omega_p = Mgl/I_3\omega_3 \)
Rolling\( a = g\sin\theta/(1 + I/MR^2) \)
Rotating frame\( -2m\boldsymbol{\omega}\times\mathbf{v} - m\boldsymbol{\omega}\times(\boldsymbol{\omega}\times\mathbf{r}) - m\dot{\boldsymbol{\omega}}\times\mathbf{r} \)
Foucaultrate \( \omega_E\sin\lambda \)
Eastward fall\( \tfrac{1}{3}\omega gt^3\cos\lambda \)
Bucket\( z = \omega^2\rho^2/2g \)
Larmor\( \omega_L = qB/2m \)
Bead on hoop\( \cos\theta_0 = g/\omega^2R \); frequency \( \omega\sin\theta_0 \)

Key Takeaways

What’s Next