Magnetostatics and Electromagnetic Induction
CSIR NET magnetostatics and induction: Biot–Savart, Ampère's law, vector potential, magnetic dipoles, Faraday's law, inductance, energy, practice.
- 20 min
On this page · 17 sections
- Prerequisites
- The Hook: A Magnet That Falls Slowly
- The Lorentz Force
- The Biot–Savart Law
- Ampère’s Law and the Divergence of B
- The Magnetic Vector Potential
- Magnetic Dipoles
- Boundary Conditions and Magnetised Matter
- Faraday’s Law of Induction
- Inductance
- Memory Tricks
- Don’t Confuse
- Common Mistakes
- Practice
- Quick Revision Table
- Key Takeaways
- What’s Next
Prerequisites
- Electrostatics: Gauss’s Law, Laplace and Poisson, Boundary Value Problems: boundary conditions and multipoles carry over almost word for word.
- Stokes’ theorem \( \oint\mathbf A\cdot d\mathbf l = \int(\nabla\times\mathbf A)\cdot d\mathbf a \) and the identity \( \nabla\cdot(\nabla\times\mathbf A) = 0 \).
- Line and surface integrals in cylindrical coordinates.
The Hook: A Magnet That Falls Slowly
The Lorentz Force
A charge \( q \) moving with velocity \( \mathbf v \) feels
$$\mathbf F = q(\mathbf E + \mathbf v\times\mathbf B)$$The magnetic part is perpendicular to \( \mathbf v \), so magnetic forces do no work. They change the direction of motion, never the speed. (When a magnetic crane lifts a car, the work is done by the electric forces in the wires; the magnetic force redirects it.) The full consequences for single particles are on Charged Particles in Static Uniform Fields.
On a current element: \( d\mathbf F = I\,d\mathbf l\times\mathbf B \). Two long parallel wires carrying \( I_1 \), \( I_2 \) a distance \( d \) apart feel a force per unit length
$$\frac{F}{l} = \frac{\mu_0I_1I_2}{2\pi d}$$attractive for parallel currents, repulsive for antiparallel: the opposite of like charges. \( \mu_0 = 4\pi\times10^{-7} \) N A\( ^{-2} \) to the precision the exam needs.
The Biot–Savart Law
For a steady current,
$$\boxed{\mathbf B(\mathbf r) = \frac{\mu_0}{4\pi}\int\frac{I\,d\mathbf l'\times\hat{\boldsymbol{\mathscr R}}}{\mathscr R^2} = \frac{\mu_0}{4\pi}\int\frac{\mathbf J(\mathbf r')\times\hat{\boldsymbol{\mathscr R}}}{\mathscr R^2}d\tau'}$$Standard results
| Source | Field | Where |
|---|---|---|
| Straight segment, perpendicular distance \( s \) | \( \dfrac{\mu_0I}{4\pi s}(\sin\theta_2 - \sin\theta_1) \) | \( \theta \) measured from the perpendicular to each end |
| Infinite straight wire | \( \dfrac{\mu_0I}{2\pi s} \) | circles around the wire |
| Semi-infinite wire, point beside its end | \( \dfrac{\mu_0I}{4\pi s} \) | half the infinite value |
| Circular loop, centre | \( \dfrac{\mu_0I}{2R} \) | along the axis |
| Circular loop, on axis | \( \dfrac{\mu_0IR^2}{2(R^2 + z^2)^{3/2}} \) | along the axis |
| Arc of angle \( \phi \), centre | \( \dfrac{\mu_0I\phi}{4\pi R} \) | straight segments pointing at the centre add nothing |
| Square loop of side \( a \), centre | \( \dfrac{2\sqrt2\,\mu_0I}{\pi a} \) | four segments, each \( \theta = \pm45^\circ \) |
| Regular \( n \)-gon, circumradius \( R \), centre | \( \dfrac{n\mu_0I}{2\pi R}\tan\dfrac{\pi}{n} \) | tends to \( \mu_0I/2R \) as \( n \to \infty \) |
Helmholtz coils. Two coaxial coils of radius \( R \) and \( N \) turns each, separated by \( R \) and carrying the same current in the same sense, give a field at the midpoint whose first, second and third derivatives along the axis vanish:
$$B_{\text{mid}} = \left(\frac{4}{5}\right)^{3/2}\frac{\mu_0NI}{R} \approx 0.716\frac{\mu_0NI}{R}$$Ampère’s Law and the Divergence of B
The Biot–Savart field satisfies
$$\boxed{\nabla\cdot\mathbf B = 0, \qquad \nabla\times\mathbf B = \mu_0\mathbf J \quad\Longleftrightarrow\quad \oint\mathbf B\cdot d\mathbf l = \mu_0I_{\text{enc}}}$$\( \nabla\cdot\mathbf B = 0 \) says there are no magnetic monopoles: field lines close on themselves. Ampère’s law, like Gauss’s law, finds \( \mathbf B \) only with symmetry: infinite lines, infinite planes, solenoids and toroids.
| Configuration | Field |
|---|---|
| Inside a long straight wire of radius \( a \), uniform current | \( \dfrac{\mu_0Is}{2\pi a^2} \) |
| Outside it | \( \dfrac{\mu_0I}{2\pi s} \) |
| Infinite sheet, surface current \( K \) | \( \dfrac{\mu_0K}{2} \), parallel to the sheet and perpendicular to \( \mathbf K \) |
| Long solenoid, \( n \) turns per length | \( \mu_0nI \) inside, 0 outside |
| Toroid, \( N \) turns | \( \dfrac{\mu_0NI}{2\pi s} \) inside the windings, 0 elsewhere |
| Coaxial cable, inner \( a \), outer \( b \) (equal and opposite currents) | \( \dfrac{\mu_0I}{2\pi s} \) for \( a < s < b \), 0 outside |
The Magnetic Vector Potential
Since \( \nabla\cdot\mathbf B = 0 \), write \( \mathbf B = \nabla\times\mathbf A \). \( \mathbf A \) is not unique: adding any gradient leaves \( \mathbf B \) unchanged. Choosing the Coulomb gauge \( \nabla\cdot\mathbf A = 0 \), Ampère’s law becomes three Poisson equations,
$$\nabla^2\mathbf A = -\mu_0\mathbf J, \qquad \mathbf A(\mathbf r) = \frac{\mu_0}{4\pi}\int\frac{\mathbf J(\mathbf r')}{\mathscr R}d\tau'$$so \( \mathbf A \) tends to point along the current.
| Field | A convenient vector potential |
|---|---|
| Uniform \( \mathbf B \) | \( \mathbf A = \tfrac{1}{2}\mathbf B\times\mathbf r \) (symmetric gauge), or \( \mathbf A = Bx\,\hat y \) (Landau gauge, for \( \mathbf B = B\hat z \)) |
| Inside a long solenoid of radius \( R \) | \( A_\phi = \tfrac{1}{2}\mu_0nIs \) |
| Outside it | \( A_\phi = \dfrac{\mu_0nIR^2}{2s} \), non-zero although \( \mathbf B = 0 \) |
| Infinite wire | \( \mathbf A = -\dfrac{\mu_0I}{2\pi}\ln(s/s_0)\,\hat z \) |
The non-zero \( \mathbf A \) outside a solenoid is the basis of the Aharonov–Bohm effect: electrons passing on either side pick up a relative phase \( q\Phi/\hbar \) though they never meet a field. The flux through any loop is \( \Phi = \oint\mathbf A\cdot d\mathbf l \).
Magnetic Dipoles
Far from any small current loop the leading term is the dipole term, with magnetic moment \( \mathbf m = I\mathbf a \) (\( \mathbf a \) the vector area, right-hand rule with the current):
$$\mathbf A_{\text{dip}} = \frac{\mu_0}{4\pi}\frac{\mathbf m\times\hat r}{r^2}, \qquad \boxed{\mathbf B_{\text{dip}} = \frac{\mu_0}{4\pi r^3}\left[3(\mathbf m\cdot\hat r)\hat r - \mathbf m\right]}$$There is no monopole term: \( \oint d\mathbf l = 0 \). In an external field:
| Quantity | Formula |
|---|---|
| Torque | \( \mathbf N = \mathbf m\times\mathbf B \) |
| Energy | \( U = -\mathbf m\cdot\mathbf B \) |
| Force | \( \mathbf F = \nabla(\mathbf m\cdot\mathbf B) \); zero in a uniform field |
| Orbiting charge | \( \mathbf m = \dfrac{q}{2m_q}\mathbf L \), the classical gyromagnetic ratio |
A charge \( q \) on a circular orbit of radius \( r \) at speed \( v \) is a current \( qv/2\pi r \), so \( m = qvr/2 \), which is \( (q/2m_q)L \). For the electron the spin moment has twice this ratio (\( g \approx 2 \)), a quantum result.
Boundary Conditions and Magnetised Matter
Across a surface carrying surface current \( \mathbf K \), with \( \hat n \) from region 1 to region 2:
$$B_{2\perp} = B_{1\perp}, \qquad \mathbf B_2 - \mathbf B_1 = \mu_0\mathbf K\times\hat n, \qquad \mathbf A_2 = \mathbf A_1$$The normal component is continuous; the tangential component jumps by \( \mu_0K \).
Matter responds with a magnetisation \( \mathbf M \) (moment per volume). Its field is that of bound currents:
$$\mathbf J_b = \nabla\times\mathbf M, \qquad \mathbf K_b = \mathbf M\times\hat n$$Defining \( \mathbf H = \mathbf B/\mu_0 - \mathbf M \) leaves only free current as a source: \( \nabla\times\mathbf H = \mathbf J_f \), \( \oint\mathbf H\cdot d\mathbf l = I_{f,\text{enc}} \). In linear media \( \mathbf M = \chi_m\mathbf H \) and \( \mathbf B = \mu\mathbf H \) with \( \mu = \mu_0(1 + \chi_m) \).
| Class | \( \chi_m \) | Origin |
|---|---|---|
| Diamagnetic | small, negative | induced orbital moments oppose the field (Lenz at the atomic scale) |
| Paramagnetic | small, positive | alignment of permanent moments; \( \chi \propto 1/T \) (Curie law) |
| Ferromagnetic | large, field-dependent, hysteretic | exchange-coupled domains; paramagnetic above the Curie temperature |
| Superconductor (Meissner state) | \( -1 \) | perfect diamagnet, \( \mathbf B = 0 \) inside |
A uniformly magnetised sphere has bound surface current \( K_b = M\sin\theta \) and a uniform interior field \( \mathbf B = \frac{2}{3}\mu_0\mathbf M \); outside it is a perfect dipole with \( \mathbf m = \frac{4}{3}\pi R^3\mathbf M \). Compare the uniformly polarised sphere, whose interior field is \( -\mathbf P/3\varepsilon_0 \).
Faraday’s Law of Induction
Any change of magnetic flux through a circuit induces an emf
$$\boxed{\mathcal E = -\frac{d\Phi}{dt}, \qquad \nabla\times\mathbf E = -\frac{\partial\mathbf B}{\partial t}}$$The minus sign is Lenz’s law: the induced current flows so as to oppose the change in flux. For an \( N \)-turn coil, \( \mathcal E = -N\,d\Phi/dt \).
The flux rule covers two physically different cases with one formula:
- Motional emf. A conductor moves through a static field; the emf is the magnetic force per unit charge, \( \mathcal E = \oint(\mathbf v\times\mathbf B)\cdot d\mathbf l \). A rod of length \( l \) moving at \( v \) perpendicular to \( B \): \( \mathcal E = Blv \).
- Transformer emf. A stationary loop in a changing field; the emf comes from a genuinely new, non-conservative electric field with \( \nabla\times\mathbf E \neq 0 \).
Motional emf results
| Setup | emf |
|---|---|
| Rod on rails, speed \( v \) | \( Blv \) |
| Rod of length \( l \) rotating about one end at \( \omega \), \( \mathbf B \) along the axis | \( \tfrac{1}{2}B\omega l^2 \) |
| Faraday disc of radius \( R \) | \( \tfrac{1}{2}B\omega R^2 \) between axle and rim |
| \( N \)-turn coil of area \( A \) rotating at \( \omega \) in uniform \( B \) | \( NBA\omega\sin\omega t \) |
The induced electric field
Where \( \partial\mathbf B/\partial t \) has symmetry, find \( \mathbf E \) the way Ampère’s law finds \( \mathbf B \): \( \oint\mathbf E\cdot d\mathbf l = -d\Phi/dt \). For a long solenoid of radius \( R \) with uniform \( dB/dt \):
$$E_\phi = \begin{cases}\dfrac{s}{2}\dfrac{dB}{dt}, & s < R\\[2mm] \dfrac{R^2}{2s}\dfrac{dB}{dt}, & s > R\end{cases}$$The field outside is non-zero though \( \mathbf B = 0 \) there. It is largest at \( s = R \), and it has the same value at \( s = R/2 \) as at \( s = 2R \).
Conducting rod on rails: terminal velocity
A rod of length \( l \), mass \( m \), slides on frictionless rails joined by a resistor \( R \), in a field \( B \) perpendicular to the plane, pulled by a constant force \( F \). The current is \( I = Blv/R \) and the retarding force \( IlB = B^2l^2v/R \). Newton’s law:
$$m\frac{dv}{dt} = F - \frac{B^2l^2}{R}v \quad\Rightarrow\quad v(t) = v_t\left(1 - e^{-t/\tau}\right), \quad v_t = \frac{FR}{B^2l^2}, \quad \tau = \frac{mR}{B^2l^2}$$At terminal speed, the mechanical power \( Fv_t \) equals the Joule heating \( I^2R \). The falling magnet in a pipe is the same physics with a distributed resistor.
Inductance
The flux through circuit 2 due to current \( I_1 \) in circuit 1 is \( \Phi_2 = M_{21}I_1 \). The Neumann formula
$$M = \frac{\mu_0}{4\pi}\oint\oint\frac{d\mathbf l_1\cdot d\mathbf l_2}{\mathscr R}$$is symmetric, so \( M_{12} = M_{21} \): the flux through 2 per unit current in 1 equals the flux through 1 per unit current in 2. Use whichever is easier to compute. The coupling obeys \( M \leq \sqrt{L_1L_2} \).
A circuit’s flux through itself defines the self-inductance, \( \Phi = LI \), with back-emf \( \mathcal E = -L\,dI/dt \).
| System | Inductance |
|---|---|
| Long solenoid, \( N \) turns, length \( l \), area \( A \) | \( L = \mu_0N^2A/l = \mu_0n^2Al \) |
| Toroid of rectangular cross-section, height \( h \), radii \( a, b \) | \( L = \dfrac{\mu_0N^2h}{2\pi}\ln\dfrac{b}{a} \) |
| Coaxial cable, per unit length (surface currents) | \( L' = \dfrac{\mu_0}{2\pi}\ln\dfrac{b}{a} \) |
| Small loop (radius \( b \)) at the centre of a large coaxial loop (radius \( a \gg b \)) | \( M = \dfrac{\mu_0\pi b^2}{2a} \) |
| Two solenoids wound on the same core, full coupling | \( M = \sqrt{L_1L_2} \) |
Inductance scales as \( N^2 \): doubling the turns on the same former quadruples \( L \).
Magnetic energy
The work done against the back-emf in building up a current \( I \) is
$$\boxed{W = \frac{1}{2}LI^2 = \frac{1}{2\mu_0}\int_{\text{all space}}B^2\,d\tau = \frac{1}{2}\oint\mathbf A\cdot\mathbf I\,dl}$$so the energy density is \( u_B = B^2/2\mu_0 \). This is often the quickest route to \( L \): compute the field energy and set it equal to \( \frac{1}{2}LI^2 \). For two coupled circuits, \( W = \frac{1}{2}L_1I_1^2 + \frac{1}{2}L_2I_2^2 + MI_1I_2 \).
Circuits
| Circuit | Behaviour |
|---|---|
| RL, switched on with emf \( \mathcal E_0 \) | \( I = \dfrac{\mathcal E_0}{R}\left(1 - e^{-Rt/L}\right) \), time constant \( L/R \) |
| RL, source removed | \( I = I_0e^{-Rt/L} \); energy \( \frac{1}{2}LI_0^2 \) ends as heat in \( R \) |
| LC | oscillates at \( \omega_0 = 1/\sqrt{LC} \); energy swaps between \( \frac{1}{2}CV^2 \) and \( \frac{1}{2}LI^2 \) |
| Series LCR | damped at rate \( R/2L \); quality factor \( Q = \omega_0L/R \) |
Memory Tricks
Don’t Confuse
| This | vs | That |
|---|---|---|
| \( \nabla\cdot\mathbf B = 0 \) always | \( \nabla\times\mathbf B = \mu_0\mathbf J \) only for steady currents | |
| \( B_\perp \) continuous across a current sheet | \( B_\parallel \) jumps by \( \mu_0K \) | |
| \( \mathbf H \) sourced by free current | \( \mathbf B \) sourced by all current | |
| Motional emf: \( \mathbf v\times\mathbf B \) force | Transformer emf: induced \( \mathbf E \) with non-zero curl | |
| Self-inductance \( \propto N^2 \) | Field of a solenoid \( \propto N \) | |
| \( \mathbf A \) can be non-zero where \( \mathbf B = 0 \) | \( \mathbf B = 0 \) does not imply zero flux through a loop enclosing a solenoid | |
| Magnetic force does no work | Electric force does work |
Common Mistakes
Practice
All questions below are original practice questions written for this page. They are not from any CSIR NET paper.
Level 1: Foundation
- Write the magnetic field at the centre of a circular loop of radius \( R \) carrying current \( I \).
- A rod of length \( l \) moves with speed \( v \) perpendicular to a uniform field \( B \) and to its own length. What emf appears across it?
- The number of turns of a solenoid is tripled, keeping its length and area. By what factor does its self-inductance change?
Answers
- \( \mu_0I/2R \), along the axis by the right-hand rule.
- \( Blv \).
- Nine. \( L = \mu_0N^2A/l \propto N^2 \).
Level 2: Part B Style
Practice Q1. A square loop of side 10 cm carries a current of 2 A. The magnetic field at its centre is closest to:
(a) 8.0 μT (b) 12.6 μT (c) 22.6 μT (d) 25.1 μT
Answer: (c) 22.6 μT
Each side is at \( s = a/2 = 5 \) cm and subtends \( \theta = \pm45^\circ \): \( B_{\text{side}} = \dfrac{\mu_0I}{4\pi(a/2)}(2\sin45^\circ) \). Four sides: \( B = \dfrac{2\sqrt2\mu_0I}{\pi a} = \dfrac{2\sqrt2\times4\pi\times10^{-7}\times2}{\pi\times0.1} = 2.26\times10^{-5} \) T.
Option (a) is \( \mu_0I/\pi a \), forgetting the \( 2\sqrt2 \). Option (d) is \( \mu_0I/2R \) for the inscribed circle of radius \( a/2 \); the square’s corners lie farther out, so its field is a little smaller.
Practice Q2. A solenoid 50 cm long with 2000 turns per metre has a cross-sectional area of 4 cm\( ^2 \). Its self-inductance is approximately:
(a) 0.25 mH (b) 0.50 mH (c) 1.0 mH (d) 2.0 mH
Answer: (c) 1.0 mH
\( L = \mu_0n^2Al = 4\pi\times10^{-7}\times(2000)^2\times4\times10^{-4}\times0.5 = 1.005\times10^{-3} \) H.
Practice Q3. A long solenoid of radius 2 cm has a uniform axial field increasing at 0.5 T s\( ^{-1} \). The magnitudes of the induced electric field at 1 cm and at 4 cm from the axis are, respectively:
(a) 2.5 mV/m and 2.5 mV/m (b) 2.5 mV/m and 0 (c) 5.0 mV/m and 1.25 mV/m (d) 2.5 mV/m and 10 mV/m
Answer: (a) 2.5 mV/m at both
Inside: \( E = \frac{s}{2}\frac{dB}{dt} = \frac{0.01}{2}\times0.5 = 2.5\times10^{-3} \) V/m.
Outside: \( E = \frac{R^2}{2s}\frac{dB}{dt} = \frac{(0.02)^2}{2\times0.04}\times0.5 = 2.5\times10^{-3} \) V/m.
The points \( s = R/2 \) and \( s = 2R \) give equal fields. Option (b) is the common error of setting the field to zero where \( \mathbf B = 0 \).
Practice Q4. A rod slides on horizontal frictionless rails 0.5 m apart, joined by a 2 Ω resistor, in a vertical field of 0.4 T. A constant horizontal force of 0.2 N pulls the rod. Its terminal speed is:
(a) 2.5 m/s (b) 5 m/s (c) 10 m/s (d) 20 m/s
Answer: (c) 10 m/s
\( v_t = \dfrac{FR}{B^2l^2} = \dfrac{0.2\times2}{(0.4)^2(0.5)^2} = \dfrac{0.4}{0.04} = 10 \) m/s. Check: \( I = Blv/R = 0.4\times0.5\times10/2 = 1 \) A; \( I^2R = 2 \) W \( = Fv_t \).
Level 3: Part C Style
Practice Q5. A coaxial cable has an inner conductor of radius \( a \) and a thin outer conductor of radius \( b = e^2a \), carrying equal and opposite currents \( I \) on their surfaces. Consider:
- The field between the conductors is \( \mu_0I/2\pi s \) and the field outside is zero.
- The inductance per unit length is \( 4\times10^{-7} \) H m\( ^{-1} \).
- The magnetic energy per unit length at \( I = 10 \) A is \( 4\times10^{-5} \) J m\( ^{-1} \).
- If the inner current were spread uniformly through the inner conductor instead, the inductance per unit length would decrease.
Which are correct?
(a) 1 and 2 only (b) 1, 2 and 3 only (c) 1, 2 and 4 only (d) 2 and 3 only
Answer: (a) 1 and 2 only
Statement 1: Ampère’s law with enclosed current \( I \) between the conductors and \( 0 \) outside. True.
Statement 2: \( L' = \dfrac{\mu_0}{2\pi}\ln\dfrac{b}{a} = 2\times10^{-7}\times2 = 4\times10^{-7} \) H/m. True.
Statement 3: \( W' = \tfrac{1}{2}L'I^2 = \tfrac{1}{2}\times4\times10^{-7}\times100 = 2\times10^{-5} \) J/m. The stated value forgets the \( \tfrac{1}{2} \). False.
Statement 4: a volume current adds field (and energy) inside the inner conductor, \( \mu_0I/8\pi \) per unit length extra in \( L' \). Inductance increases. False.
Practice Q6. A 100-turn coil of area 0.01 m\( ^2 \) rotates at 50 revolutions per second about an axis perpendicular to a uniform field of 0.2 T. The coil is connected to a load. A student records the emf on an oscilloscope. Which statements are correct?
- The peak emf is about 62.8 V.
- The rms emf is about 44.4 V.
- The emf is maximum when the plane of the coil is perpendicular to the field.
- Doubling the rotation rate doubles both the peak emf and its frequency.
(a) 1 and 2 only (b) 1, 2 and 4 only (c) 1, 3 and 4 only (d) 2, 3 and 4 only
Answer: (b) 1, 2 and 4 only
\( \omega = 2\pi\times50 = 314.2 \) rad/s. Peak \( = NBA\omega = 100\times0.2\times0.01\times314.2 = 62.8 \) V. True.
rms \( = 62.8/\sqrt2 = 44.4 \) V. True.
\( \Phi = NBA\cos\omega t \), so \( \mathcal E = NBA\omega\sin\omega t \) is largest when \( \Phi = 0 \), that is, when the coil’s plane is parallel to the field (the sides cut the field lines fastest). Statement 3 false.
\( \mathcal E_0 \propto \omega \) and the frequency is \( \omega/2\pi \). True.
Practice Q7. A small circular loop of radius \( b \) lies at the centre of, and coplanar with, a large circular loop of radius \( a \gg b \). The current in the large loop is \( I(t) = I_0\sin\omega t \). The amplitude of the emf induced in the small loop is:
(a) \( \dfrac{\mu_0\pi b^2\omega I_0}{2a} \) (b) \( \dfrac{\mu_0\pi a^2\omega I_0}{2b} \) (c) \( \dfrac{\mu_0b\omega I_0}{2} \) (d) \( \dfrac{\mu_0\pi b^2\omega I_0}{4a} \)
Answer: (a)
The large loop’s field at its centre is \( \mu_0I/2a \), nearly uniform over the small loop. Flux \( = \dfrac{\mu_0I}{2a}\pi b^2 \), so \( M = \dfrac{\mu_0\pi b^2}{2a} \) and the emf amplitude is \( M\omega I_0 \).
By reciprocity the same \( M \) gives the flux through the big loop due to the small loop’s dipole field, a much harder integral. Option (b) swaps the roles of \( a \) and \( b \); a dimensional check alone does not catch it, but the limit \( b \to 0 \) (emf must vanish) does.
Quick Revision Table
| Result | Formula |
|---|---|
| Biot–Savart | \( \mathbf B = \frac{\mu_0}{4\pi}\int\frac{I\,d\mathbf l\times\hat{\mathscr R}}{\mathscr R^2} \) |
| Wire / loop centre / loop axis | \( \frac{\mu_0I}{2\pi s} \) / \( \frac{\mu_0I}{2R} \) / \( \frac{\mu_0IR^2}{2(R^2 + z^2)^{3/2}} \) |
| Square loop centre | \( 2\sqrt2\mu_0I/\pi a \) |
| Ampère | \( \oint\mathbf B\cdot d\mathbf l = \mu_0I_{\text{enc}} \) |
| Solenoid / toroid / sheet | \( \mu_0nI \) / \( \mu_0NI/2\pi s \) / \( \mu_0K/2 \) |
| Dipole | \( \mathbf m = I\mathbf a \); \( \mathbf N = \mathbf m\times\mathbf B \); \( U = -\mathbf m\cdot\mathbf B \) |
| Boundary | \( B_\perp \) continuous; \( B_\parallel \) jumps by \( \mu_0K \) |
| Faraday | \( \mathcal E = -d\Phi/dt \); \( \nabla\times\mathbf E = -\partial\mathbf B/\partial t \) |
| Motional | \( Blv \); rotating rod \( \frac{1}{2}B\omega l^2 \) |
| Solenoid \( L \) | \( \mu_0n^2Al \) |
| Coax \( L' \) | \( \frac{\mu_0}{2\pi}\ln(b/a) \) |
| Energy | \( \frac{1}{2}LI^2 = \int\frac{B^2}{2\mu_0}d\tau \) |
| Terminal velocity | \( FR/B^2l^2 \) |
Key Takeaways
What’s Next
- Maxwell’s Equations, Potentials and Gauge Invariance: displacement current completes Ampère’s law, and \( \mathbf A \) and \( V \) become a pair related by gauge transformations.
- Charged Particles in Static Uniform Fields: the Lorentz force applied to single particles.
- Electrostatics: Gauss’s Law, Laplace and Poisson for the electric analogues of every result here.
- The quantum side of magnetic moments (spin, \( g \approx 2 \), Stern–Gerlach) is in Angular Momentum, Spin and the Hydrogen Atom.