Skip to content

Thermodynamic Potentials, Maxwell Relations and Phase Equilibria

CSIR NET thermodynamics: U, H, F, G and grand potential, Maxwell relations, Cp − Cv, Joule–Thomson, chemical potential, Clausius–Clapeyron, phase rule.

  • 19 min read
  • Updated
On this page · 15 sections
  1. Prerequisites
  2. The Hook: Measuring the Unmeasurable
  3. The Four (Plus One) Potentials
  4. Maxwell Relations
  5. Joule–Thomson Expansion
  6. Chemical Potential
  7. Equilibrium and Stability
  8. Phase Equilibria
  9. Memory Tricks
  10. Don’t Confuse
  11. Common Mistakes
  12. Practice
  13. Quick Revision Table
  14. Key Takeaways
  15. What’s Next

Prerequisites

The Hook: Measuring the Unmeasurable

The Four (Plus One) Potentials

Each potential is a Legendre transform of \( U(S, V, N) \) that swaps a variable hard to control (entropy, volume) for its conjugate that is easy to control (temperature, pressure).

PotentialDefinitionDifferentialNatural variablesMinimum at equilibrium when
Internal energy \( U \)—\( T\,dS - P\,dV + \mu\,dN \)\( S, V, N \)\( S, V, N \) fixed
Enthalpy \( H \)\( U + PV \)\( T\,dS + V\,dP + \mu\,dN \)\( S, P, N \)\( S, P, N \) fixed
Helmholtz \( F \)\( U - TS \)\( -S\,dT - P\,dV + \mu\,dN \)\( T, V, N \)\( T, V, N \) fixed
Gibbs \( G \)\( U - TS + PV \)\( -S\,dT + V\,dP + \mu\,dN \)\( T, P, N \)\( T, P, N \) fixed
Grand potential \( \Omega \)\( U - TS - \mu N \)\( -S\,dT - P\,dV - N\,d\mu \)\( T, V, \mu \)\( T, V, \mu \) fixed

A potential expressed in its natural variables contains all thermodynamic information; expressed in other variables it does not. \( U(T, V) \) for an ideal gas, \( \tfrac{3}{2}Nk_BT \), says nothing about pressure; \( F(T, V, N) \) gives everything.

Euler relations

Because \( U \) is extensive (homogeneous of degree one in \( S, V, N \)),

$$\boxed{U = TS - PV + \mu N}$$

so that \( G = \mu N \) for a single component and \( \Omega = -PV \). Differentiating \( U = TS - PV + \mu N \) and subtracting \( dU \) gives the Gibbs–Duhem relation:

$$\boxed{S\,dT - V\,dP + N\,d\mu = 0}$$

So \( T \), \( P \), \( \mu \) are not independent: for one component, \( d\mu = -s\,dT + v\,dP \) with \( s, v \) per particle.

Work and the potentials

ConditionMaximum useful work equals
Isothermal\( -\Delta F \) (total work, including \( P\,dV \))
Isothermal and isobaric\( -\Delta G \) (non-\( P\,dV \) work, e.g. electrical)
Isobaric, no other workheat absorbed \( = \Delta H \)

This is why \( F \) is called the free energy: it is the part of \( U \) available as work at constant temperature.

Maxwell Relations

Equality of mixed second derivatives of each potential gives one relation:

FromMaxwell relation
\( dU = T\,dS - P\,dV \)\( \left(\dfrac{\partial T}{\partial V}\right)_S = -\left(\dfrac{\partial P}{\partial S}\right)_V \)
\( dH = T\,dS + V\,dP \)\( \left(\dfrac{\partial T}{\partial P}\right)_S = \left(\dfrac{\partial V}{\partial S}\right)_P \)
\( dF = -S\,dT - P\,dV \)\( \left(\dfrac{\partial S}{\partial V}\right)_T = \left(\dfrac{\partial P}{\partial T}\right)_V \)
\( dG = -S\,dT + V\,dP \)\( \left(\dfrac{\partial S}{\partial P}\right)_T = -\left(\dfrac{\partial V}{\partial T}\right)_P \)

The last two are the workhorses: they turn entropy derivatives at constant \( T \) into derivatives of the equation of state.

The thermodynamic square

Write the variables and potentials around a square:

VFT
UG
SHP

Each potential sits between its natural variables (\( F \) between \( V \) and \( T \), and so on). Going clockwise from \( G \) the letters read G, P, H, S, U, V, F, T ("Good Physicists Have Studied Under Very Fine Teachers"). The opposite corners are conjugate pairs: \( S \) with \( T \), \( V \) with \( P \). Writing \( X^* \) for the conjugate of \( X \), every Maxwell relation has the form \( (\partial X/\partial Y)_{X^*} = \pm(\partial Y^*/\partial X^*)_Y \). Example: \( X = S \), \( Y = V \) gives \( (\partial S/\partial V)_T = (\partial P/\partial T)_V \).

Sign rule: the relations from \( U \) (independent variables \( S, V \)) and from \( G \) (independent variables \( T, P \)) carry a minus sign, as in \( (\partial S/\partial P)_T = -(\partial V/\partial T)_P \) and \( (\partial T/\partial V)_S = -(\partial P/\partial S)_V \); those from \( H \) and \( F \) do not. If in doubt, re-derive from the differential: it takes ten seconds.

Response functions

QuantityDefinition
Isobaric expansivity\( \alpha = \dfrac{1}{V}\left(\dfrac{\partial V}{\partial T}\right)_P \)
Isothermal compressibility\( \kappa_T = -\dfrac{1}{V}\left(\dfrac{\partial V}{\partial P}\right)_T \)
Adiabatic compressibility\( \kappa_S = -\dfrac{1}{V}\left(\dfrac{\partial V}{\partial P}\right)_S \)
Heat capacities\( C_v = T(\partial S/\partial T)_V \), \( C_p = T(\partial S/\partial T)_P \)

Two general results follow:

$$\boxed{C_p - C_v = \frac{TV\alpha^2}{\kappa_T}} \qquad \boxed{\frac{C_p}{C_v} = \frac{\kappa_T}{\kappa_S}}$$

Since \( \kappa_T > 0 \) for a stable system, \( C_p \geq C_v \), with equality where \( \alpha = 0 \) (water at its density maximum near 4 °C). For an ideal gas \( \alpha = 1/T \), \( \kappa_T = 1/P \), giving \( C_p - C_v = PV/T = nR \).

The energy equation and the \( T\,dS \) equations

From \( dU = T\,dS - P\,dV \) and the \( F \) Maxwell relation:

$$\boxed{\left(\frac{\partial U}{\partial V}\right)_T = T\left(\frac{\partial P}{\partial T}\right)_V - P}$$
  • Ideal gas: \( T(nR/V) - P = 0 \). \( U \) depends on \( T \) only.
  • Van der Waals gas \( \left(P + \dfrac{an^2}{V^2}\right)(V - nb) = nRT \): \( (\partial U/\partial V)_T = an^2/V^2 \), so \( U = nC_vT - an^2/V \) (\( C_v \) the molar value, taken constant). A vdW gas cools in a free expansion: \( \Delta T = -\dfrac{an}{C_v}\left(\dfrac{1}{V_1} - \dfrac{1}{V_2}\right) \).

The \( T\,dS \) equations, used for any process on a simple fluid:

$$T\,dS = C_v\,dT + T\left(\frac{\partial P}{\partial T}\right)_V dV = C_p\,dT - T\left(\frac{\partial V}{\partial T}\right)_P dP$$

Joule–Thomson Expansion

A gas forced steadily through a porous plug or valve from \( P_1 \) to \( P_2 \) with no heat exchange keeps its enthalpy constant. The Joule–Thomson coefficient is

$$\boxed{\mu_{JT} = \left(\frac{\partial T}{\partial P}\right)_H = \frac{V}{C_p}(T\alpha - 1)}$$
  • Ideal gas: \( T\alpha = 1 \), so \( \mu_{JT} = 0 \). No cooling.
  • \( \mu_{JT} > 0 \): the gas cools on expansion (pressure drops). This happens below the inversion temperature.
  • For a van der Waals gas at low density, \( \mu_{JT} \approx \dfrac{1}{C_p}\left(\dfrac{2a}{RT} - b\right) \) per mole, so \( T_{\text{inv}} = \dfrac{2a}{Rb} \).
vdW characteristic temperatureValueRatio to \( T_c \)
Critical \( T_c \)\( 8a/27Rb \)1
Boyle \( T_B \) (second virial coefficient zero)\( a/Rb \)27/8 = 3.375
Low-density inversion \( T_{\text{inv}} \)\( 2a/Rb \)27/4 = 6.75

The other critical constants are \( V_c = 3nb \), \( P_c = a/27b^2 \), and \( P_cV_c/nRT_c = 3/8 \). Measured values for real gases are lower, typically about 0.3 or less, a reminder that vdW is a qualitative model.

Chemical Potential

$$\mu = \left(\frac{\partial U}{\partial N}\right)_{S,V} = \left(\frac{\partial F}{\partial N}\right)_{T,V} = \left(\frac{\partial G}{\partial N}\right)_{T,P} = -T\left(\frac{\partial S}{\partial N}\right)_{U,V}$$

It is the energy cost of adding one particle with the other natural variables fixed. Just as heat flows from high \( T \) to low \( T \), particles flow from high \( \mu \) to low \( \mu \), and equilibrium with respect to particle exchange means equal \( \mu \).

For a classical ideal gas (derived in the ensemble pages),

$$\boxed{\mu = k_BT\ln\left(n\lambda^3\right) = \mu^\circ(T) + k_BT\ln\frac{P}{P^\circ}}, \qquad \lambda = \frac{h}{\sqrt{2\pi mk_BT}}$$

In the classical regime \( n\lambda^3 \ll 1 \), so \( \mu \) is large and negative. When \( n\lambda^3 \) approaches 1 the classical formula fails and quantum statistics take over (see Quantum Statistics: Ideal Bose and Fermi Gases). For photons, whose number is not conserved, \( \mu = 0 \).

Equilibrium and Stability

ConstraintEquilibrium condition
Isolated (\( U, V, N \) fixed)\( S \) maximum
Fixed \( T, V, N \)\( F \) minimum
Fixed \( T, P, N \)\( G \) minimum
Two parts exchanging energy, volume, particles\( T_1 = T_2 \), \( P_1 = P_2 \), \( \mu_1 = \mu_2 \)

Stability (the extremum being a maximum of \( S \)) requires \( C_v > 0 \) and \( \kappa_T > 0 \). Where an equation of state predicts \( (\partial P/\partial V)_T > 0 \), as the vdW isotherm does below \( T_c \), the uniform phase is unstable and splits into liquid and vapour. The coexistence pressure is fixed by the Maxwell equal-area construction: the horizontal line cuts off equal areas above and below the vdW loop, equivalent to equal \( \mu \) in the two phases.

Phase Equilibria

Conditions and the Clausius–Clapeyron equation

Two phases of one substance coexist when \( T \), \( P \) and \( \mu \) are equal. Moving along the coexistence curve keeps \( d\mu_1 = d\mu_2 \); with Gibbs–Duhem, \( -s_1\,dT + v_1\,dP = -s_2\,dT + v_2\,dP \), so

$$\boxed{\frac{dP}{dT} = \frac{s_2 - s_1}{v_2 - v_1} = \frac{L}{T\Delta v}}$$

with \( L = T\Delta s \) the latent heat per particle (or per mole if \( \Delta v \) is molar).

For liquid–vapour or solid–vapour far from the critical point, neglect the condensed-phase volume and treat the vapour as ideal: \( \Delta v \approx RT/P \), giving

$$\boxed{\frac{d\ln P}{dT} = \frac{L}{RT^2} \Rightarrow P = P_0\,e^{-L/RT}}$$

(for \( L \) independent of \( T \)). A plot of \( \ln P \) against \( 1/T \) is a straight line of slope \( -L/R \).

Gibbs phase rule

For \( C \) components and \( \Pi \) coexisting phases (no reactions), the number of intensive variables that can be varied independently is

$$\boxed{F = C - \Pi + 2}$$

For a one-component system: a single phase has \( F = 2 \) (a region of the \( P \)–\( T \) plane), two phases \( F = 1 \) (a coexistence line), three phases \( F = 0 \) (the triple point). Four phases of a pure substance cannot coexist in equilibrium. The critical point ends the liquid–vapour line; beyond it the two phases cannot be distinguished.

Order of a phase transition

Ehrenfest classificationFirst derivatives of \( G \) (\( S \), \( V \))Second derivatives (\( C_p \), \( \alpha \), \( \kappa_T \))Examples
First orderdiscontinuous: latent heat, volume jumpmay divergemelting, boiling, sublimation
Second order (continuous)continuous, no latent heatdiscontinuous or divergentferromagnet at the Curie point, superconductor at \( T_c \) in zero field, \( \lambda \) transition of helium-4 (strictly a divergence, not a jump)

For a second-order transition, \( \Delta s = 0 \) and \( \Delta v = 0 \), so Clausius–Clapeyron gives 0/0. Applying it to the derivatives instead gives the Ehrenfest equations:

$$\frac{dP}{dT} = \frac{\Delta C_p}{TV\Delta\alpha} = \frac{\Delta\alpha}{\Delta\kappa_T}$$

The liquid–vapour transition at the critical point itself is continuous.

Memory Tricks

Don’t Confuse

ThisvsThat
Free expansion (Joule): \( U \) constant, \( \Delta T \propto -a \)Throttling (Joule–Thomson): \( H \) constant, sign depends on \( T \) vs \( T_{\text{inv}} \)
\( (\partial S/\partial V)_T = (\partial P/\partial T)_V \)\( (\partial S/\partial P)_T = -(\partial V/\partial T)_P \) (minus sign)
Boyle temperature \( a/Rb \): gas behaves ideally at low densityInversion temperature \( 2a/Rb \): JT coefficient changes sign
\( G = \mu N \) (one component)\( F = \mu N - PV \)
Phase rule \( F = C - \Pi + 2 \)Helmholtz \( F \) — same letter, unrelated
First order: latent heatSecond order: jump in \( C_p \), no latent heat

Common Mistakes

Practice

All questions below are original practice questions written for this page. They are not from any CSIR NET paper. \( R = 8.314 \) J mol\( ^{-1} \) K\( ^{-1} \).

Level 1: Foundation

  1. What are the natural variables of the Helmholtz free energy?
  2. Write the Maxwell relation that equals \( (\partial S/\partial V)_T \).
  3. How many degrees of freedom does a one-component system have at its triple point?
Answers
  1. \( T, V, N \). \( dF = -S\,dT - P\,dV + \mu\,dN \).
  2. \( (\partial P/\partial T)_V \). From the mixed derivatives of \( F \).
  3. Zero. \( F = 1 - 3 + 2 = 0 \): the triple point is a single point.

Level 2: Part B Style

Practice Q1. For \( n \) moles of a van der Waals gas, \( (\partial U/\partial V)_T \) equals:

(a) 0 (b) \( an^2/V^2 \) (c) \( nRT/(V - nb) \) (d) \( -an^2/V^2 \)

Answer: (b) an²/V²

\( P = \dfrac{nRT}{V - nb} - \dfrac{an^2}{V^2} \), so \( T(\partial P/\partial T)_V = \dfrac{nRT}{V - nb} \). Then \( (\partial U/\partial V)_T = \dfrac{nRT}{V - nb} - P = \dfrac{an^2}{V^2} \). Positive: pulling molecules apart against attraction raises their potential energy. (a) is the ideal-gas value; (c) is only the first term.

Practice Q2. A metal at 300 K has molar volume \( 7.1\times10^{-6} \) m\( ^3 \), volume expansivity \( 5.0\times10^{-5} \) K\( ^{-1} \) and isothermal compressibility \( 7.3\times10^{-12} \) Pa\( ^{-1} \). \( C_p - C_v \) per mole is closest to:

(a) 0.073 J mol\( ^{-1} \) K\( ^{-1} \) (b) 0.73 J mol\( ^{-1} \) K\( ^{-1} \) (c) 7.3 J mol\( ^{-1} \) K\( ^{-1} \) (d) 8.3 J mol\( ^{-1} \) K\( ^{-1} \)

Answer: (b) 0.73 J/(mol K)

\( TV\alpha^2/\kappa_T = 300\times7.1\times10^{-6}\times(5.0\times10^{-5})^2/(7.3\times10^{-12}) \approx 0.73 \) J mol\( ^{-1} \) K\( ^{-1} \).

About 3 % of the Dulong–Petit value \( 3R \approx 24.9 \): for solids \( C_p \approx C_v \). (d) is the ideal-gas \( R \).

Practice Q3. A liquid boils at 373.15 K under 1 atm with molar latent heat 40.7 kJ mol\( ^{-1} \) (taken constant). Treating the vapour as ideal and neglecting the liquid volume, its boiling point at 0.70 atm is closest to:

(a) 351 K (b) 357 K (c) 363 K (d) 369 K

Answer: (c) 363 K

\( \dfrac{1}{T_2} = \dfrac{1}{T_1} - \dfrac{R}{L}\ln\dfrac{P_2}{P_1} = \dfrac{1}{373.15} - \dfrac{8.314}{40700}\ln0.70 \)

\( = 2.6799\times10^{-3} + 7.286\times10^{-5} = 2.7528\times10^{-3} \) K\( ^{-1} \), so \( T_2 \approx 363.3 \) K, about 10 K lower.

Practice Q4. A gas obeys the van der Waals equation and has critical temperature 150 K. Its low-density Joule–Thomson inversion temperature predicted by the same model is:

(a) 506 K (b) 675 K (c) 1012 K (d) 1350 K

Answer: (c) 1012 K

\( T_{\text{inv}}/T_c = (2a/Rb)/(8a/27Rb) = 27/4 = 6.75 \). \( 6.75\times150 \approx 1012 \) K. (a) is the Boyle temperature, \( (27/8)T_c \approx 506 \) K.

Level 3: Part C Style

Practice Q5. A hypothetical system has the fundamental relation \( S = A(NVU)^{1/3} \), where \( A \) is a positive constant. Consider:

  1. Its equation of state is \( PV = U \).
  2. Its internal energy at fixed \( N, V \) varies as \( T^{3/2} \).
  3. Its heat capacity at constant volume vanishes as \( T \to 0 \), consistent with the third law.
  4. \( S \) is not extensive, so the relation is unphysical.

Which are correct?

(a) 1 and 2 only (b) 1, 2 and 3 only (c) 2 and 4 only (d) 1, 2, 3 and 4

Answer: (b) 1, 2 and 3 only

\( \dfrac{1}{T} = \left(\dfrac{\partial S}{\partial U}\right)_{V,N} = \dfrac{A}{3}(NV)^{1/3}U^{-2/3} \), \( \dfrac{P}{T} = \left(\dfrac{\partial S}{\partial V}\right)_{U,N} = \dfrac{A}{3}(NU)^{1/3}V^{-2/3} \).

  1. Dividing: \( P = U/V \). True.

  2. From \( 1/T \): \( U^{2/3} = \dfrac{AT}{3}(NV)^{1/3} \Rightarrow U = \left(\dfrac{AT}{3}\right)^{3/2}(NV)^{1/2} \propto T^{3/2} \). True.

  3. \( C_v = \tfrac{3}{2}(A/3)^{3/2}(NV)^{1/2}T^{1/2} \to 0 \). Also \( S = A(NVU)^{1/3} \propto T^{1/2} \to 0 \). True.

  4. Scaling \( N, V, U \) by \( \lambda \) multiplies \( S \) by \( (\lambda^3)^{1/3} = \lambda \): extensive. False.

Practice Q6. The vapour pressure (in pascals) of a substance over its solid and over its liquid near the triple point are

$$\ln P_{\text{s}} = 28.0 - \frac{4000\ \text{K}}{T}, \qquad \ln P_{\text{l}} = 24.0 - \frac{3200\ \text{K}}{T}$$

Consider:

  1. The triple-point temperature is 200 K.
  2. The triple-point pressure is about 3.0 kPa.
  3. The molar latent heat of sublimation is about 33.3 kJ mol\( ^{-1} \).
  4. The molar latent heat of fusion is about 26.6 kJ mol\( ^{-1} \).

Which are correct?

(a) 1 and 2 only (b) 1, 2 and 3 only (c) 1, 3 and 4 only (d) 1, 2, 3 and 4

Answer: (b) 1, 2 and 3 only
  1. Equal pressures: \( 28.0 - 4000/T = 24.0 - 3200/T \Rightarrow 4.0 = 800/T \Rightarrow T = 200 \) K. True.

  2. \( \ln P = 28.0 - 20.0 = 8.0 \), \( P = e^8 \approx 2981 \) Pa. True.

  3. Slope of \( \ln P \) against \( 1/T \) is \( -L/R \): \( L_{\text{sub}} = 4000R \approx 33.3 \) kJ mol\( ^{-1} \). True.

  4. \( L_{\text{vap}} = 3200R \approx 26.6 \) kJ mol\( ^{-1} \); that is vaporisation, not fusion. At the triple point \( L_{\text{fus}} = L_{\text{sub}} - L_{\text{vap}} = 800R \approx 6.65 \) kJ mol\( ^{-1} \). False.

Practice Q7. Consider a single-component system near a continuous (second-order) phase transition in the Ehrenfest sense. Consider:

  1. The molar entropy and molar volume are continuous across the transition.
  2. The Clausius–Clapeyron equation gives the slope of the transition line directly.
  3. At least one of \( C_p \), \( \alpha \), \( \kappa_T \) is discontinuous or divergent.
  4. The slope of the transition line satisfies \( dP/dT = \Delta\alpha/\Delta\kappa_T \).

Which are correct?

(a) 1 and 3 only (b) 1, 3 and 4 only (c) 2 and 3 only (d) 1, 2, 3 and 4

Answer: (b) 1, 3 and 4 only
  1. Continuous first derivatives of \( G \) define the second-order case. True.

  2. With \( \Delta s = \Delta v = 0 \), Clausius–Clapeyron is 0/0. False.

  3. Second derivatives of \( G \) jump or diverge. True.

  4. Requiring \( \Delta v = 0 \) all along the line, \( d(\Delta v) = v\Delta\alpha\,dT - v\Delta\kappa_T\,dP = 0 \). True (one of the Ehrenfest equations).

Quick Revision Table

IdeaFormula or fact
Potentials\( H = U + PV \), \( F = U - TS \), \( G = F + PV \), \( \Omega = F - \mu N = -PV \)
Euler, Gibbs–Duhem\( U = TS - PV + \mu N \); \( S\,dT - V\,dP + N\,d\mu = 0 \)
Key Maxwell relations\( (\partial S/\partial V)_T = (\partial P/\partial T)_V \); \( (\partial S/\partial P)_T = -(\partial V/\partial T)_P \)
Heat capacities\( C_p - C_v = TV\alpha^2/\kappa_T \); \( C_p/C_v = \kappa_T/\kappa_S \)
Energy equation\( (\partial U/\partial V)_T = T(\partial P/\partial T)_V - P \); vdW: \( an^2/V^2 \)
Joule–Thomson\( \mu_{JT} = (V/C_p)(T\alpha - 1) \); vdW \( T_{\text{inv}} = 2a/Rb \)
vdW constants\( T_c = 8a/27Rb \), \( V_c = 3nb \), \( P_c = a/27b^2 \), \( Z_c = 3/8 \)
Ideal-gas \( \mu \)\( k_BT\ln(n\lambda^3) \)
Clausius–Clapeyron\( dP/dT = L/(T\Delta v) \); vapour: \( P \propto e^{-L/RT} \)
Phase rule\( F = C - \Pi + 2 \)
Water meltingslope \( \approx -133 \) atm K\( ^{-1} \)
Ehrenfest\( dP/dT = \Delta C_p/(TV\Delta\alpha) = \Delta\alpha/\Delta\kappa_T \)

Key Takeaways

What’s Next